|
|
Gluing as a method for flat roofs stabilization
Šafářová, Markéta ; Oláh,, Jozef (referee) ; Plachý,, Jan (referee) ; Lavický, Miloš (advisor)
Flat roofs are very desired type of building roofing these days. We can find flat roofs in construction of family and apartment houses, manufacturing and storage buildings, office buildings, shopping centres, etc. and not only in constructions of new building, but in substantial amount also during reconstruction. For every flat roof it is necessary to design a way of roof plies stabilization against wind suction. Gluing is one of many used methods of flat roof stabilization. The gluing itself can be implemented by innumerable adhesives of various compositions from many manufacturers. Gluing has advantages and disadvantages as every method. Lack of information can be considered as key disadvantage. Especially the lack of information about strength of gluing joints. The dissertation is focused on polyurethane adhesives, their application for stabilization of layers in flat roof and experimental determination of strength values of glued joints. The first phase of the dissertation aims to create a test methodology for experimental measurements. As a part of the methology to create a test model, a test apparatus and a procedure for experimental measurements. In next phase dissertation focuses on experimental measurements and their evaluation. Research was primarily focused on properties of gluing joint depending on the amount and type of the adhesive, material of bonding layers and technological indiscipline. The results of experimental measurement provide numerical values of strength of the gluing joints and pointed to risky situations which can occur during realization. The conclusion provides practical recommendations and possible opportunities for continuation of the work on this topic.
|
|
|
House of Beauty Salon
Ficza, Silvia ; Šafářová, Markéta (referee) ; Lavický, Miloš (advisor)
The bachelor thesis deals with the design of a family house with a beauty salon. The object is a detached two-storey building with a flat roof and a basement and it gives home to five people. The garage and the parking lot for the clients of the salon are also part of the object. The main entrance into the building is situated to the west and the separate entrance for the clients of the salon to the north. The construction system of the house consists of solid wooden CLT (cross laminated timbre) based panels from the Novatop company. The structure is based on foam glass, as by its´ use there is no need for further isolation of the building from the base plate, which is made of steel reinforced concrete. Thanks to good land selection, there were no problems with underground water or possible damage to neighbouring buildings.
|
|
|
Family house in Chrudim
Doležal, Filip ; Šafářová, Markéta (referee) ; Hlavačka, Tomáš (advisor)
My bachelor‘s thesis concerns a project of a family house that is embedded into a sloping terrain. The work is to the extent of the relevant project documentation which also determines the division into separate units. The designed house is special mainly for its construction system made of prefabricated concrete skeleton. This system has a strong effect on the overall character and offers many specific details on which an emphasis is placed in my work.
|
|
|
House with Place of Business
Pichner, Petr ; Šafářová, Markéta (referee) ; Lavický, Miloš (advisor)
The bachelor’s thesis deals project documentation of family house with an establishment – repair shop of bicycles. The house with its layout creates the letter L with one beveled corner. The building has one underground storey and two above ground storeys. The underground storey is only under section of house. So the object is partly a basement. The part of house with a establishment have only one above ground storey. Over the residential part of building and over establishment is flat roof. The roofs are in different height. The house is brick. The family house serve as one housing unit for 5 people. In repair shop there are two or three workers, it being understood that workers may be residents of a house. Therefore the establishment and a family house are internally connected. The building is located on flat land in existing buildings in cadastral Žamberk.
|
|
| |
|
|
Low-floor Timber House
Pošmura, Marek ; Šafářová, Markéta (referee) ; Lavický, Miloš (advisor)
Bachelor's thesis is developed on Low-floor timber house. It is processed in the form of design documentation containing all the elements in accordance with applicable regulations. It is a family house with two floors and it is design for 4-5 people. As a support system was chosen large format solid components made of cross laminated timber from Novatop. The house is covered with a three shed roofs. The house is insulated with fiberboard insolations.
|
|
|
Masonry house
Kovář, Jan ; Šafářová, Markéta (referee) ; Lavický, Miloš (advisor)
The aim of this bachelor thesis which is called „ A brick – built detached house“ is to create documentation for carrying out construction. The house is designed for a four – member family. It is situated in a suburb of Velké Němčice. The building has been designed as a detached house with two floors and no basement. The first floor consists of two parts – a technical and active one. In the technical part, there is a garage for a car, workroom, technical room, closet and staircase. In the active part, there is a living room with dining room, kitchen and entrance leading to the terrace. On the second floor, there is a closet, bathroom, drying room, separate toilet and three rooms. The load – bearing wall is made of brick breeze blocks Porotherm. The ceiling is made of POT girders and ceiling inserts Miako. Part of the house is covered with a single pitch roof with an agle of inclination of 15° made of a tin roof covering Lindab and the second part is made of a flat roof from a sloped wedge.
|
|
|
Gluing as a method for flat roofs stabilization
Šafářová, Markéta ; Oláh,, Jozef (referee) ; Plachý,, Jan (referee) ; Lavický, Miloš (advisor)
Flat roofs are very desired type of building roofing these days. We can find flat roofs in construction of family and apartment houses, manufacturing and storage buildings, office buildings, shopping centres, etc. and not only in constructions of new building, but in substantial amount also during reconstruction. For every flat roof it is necessary to design a way of roof plies stabilization against wind suction. Gluing is one of many used methods of flat roof stabilization. The gluing itself can be implemented by innumerable adhesives of various compositions from many manufacturers. Gluing has advantages and disadvantages as every method. Lack of information can be considered as key disadvantage. Especially the lack of information about strength of gluing joints. The dissertation is focused on polyurethane adhesives, their application for stabilization of layers in flat roof and experimental determination of strength values of glued joints. The first phase of the dissertation aims to create a test methodology for experimental measurements. As a part of the methology to create a test model, a test apparatus and a procedure for experimental measurements. In next phase dissertation focuses on experimental measurements and their evaluation. Research was primarily focused on properties of gluing joint depending on the amount and type of the adhesive, material of bonding layers and technological indiscipline. The results of experimental measurement provide numerical values of strength of the gluing joints and pointed to risky situations which can occur during realization. The conclusion provides practical recommendations and possible opportunities for continuation of the work on this topic.
|
|
|
Family house in Chrudim
Doležal, Filip ; Šafářová, Markéta (referee) ; Hlavačka, Tomáš (advisor)
My bachelor‘s thesis concerns a project of a family house that is embedded into a sloping terrain. The work is to the extent of the relevant project documentation which also determines the division into separate units. The designed house is special mainly for its construction system made of prefabricated concrete skeleton. This system has a strong effect on the overall character and offers many specific details on which an emphasis is placed in my work.
|
|
|
Sport Centre
Šafářová, Markéta ; Havířová, Zdeňka (referee) ; Lavický, Miloš (advisor)
Goal of master thesis was design of sports center in microregion Ivancice. Absence of similar establishment in locality was taken into account during project. Complex includes squash courts, sauna, 2 swimming pools and snack-bar. Whole complex is designed as 3 connected single storey buildings from prefa concrete structures with vegetation roofs. Light steel panels are used on outer walls.
|
guest ::
RSS feed.