|
|
Design of reinforced concrete structurs of shopping center
Podepřel, Petr ; Šulák, Pavel (referee) ; Požár, Michal (advisor)
The bachelor thesis deals with the design of the locally underpinned, monolithic, reinforced concrete ceiling plate of the lowest floor of a multi-storey shopping centre, with the design of a typical column on the same floor as well as with the column foot under that column. Furthermore, the solution of the assembled staircase has been made. The design of the ceiling plate is done by using the Scia Engineer programme and the check is done by manual calculation using the sum moments method. The design of the column, column foot and the staircase is done by manual calculation. The design was proceeded according to the valid European standards ČSN EN 1992-1-1 and ČSN 73 1201. The result of this work is the static design of the ceiling plate reinforcement, the column, the column foot, the assembled staircase and the drawing documentation.
|
|
|
Rebuilding a Family House
Zlámalová, Pavlína ; Požár, Michal (referee) ; Švaříčková, Ivana (advisor)
The thesis deals with the reconstruction of the family house. The main aim of my thesis is assessment of the existing floor slab and designing of reinforcement due to lack of static part of design documentation. Internal forces on the slab are obtained by using finite element method on which the slab is designed. Due to superstructure of one extra floor above original structure it is necessary to make the hole for the staircase into the existing ceiling construction and demolition of loadbearing wall for disposition improvement. Intervention into the original construction has the effect of redistribution internal forces. At this case additional reinforcement of floor slab is necessary. For additional floor slab are selected and designed CFRP carbon straps. Rotate rib is being prepared instead of original demolished loadbearing wall which will be connect with original floor slab by using of stirrups. All calculations were performed in accordance with valid standard.
|
|
|
Design of the point supported slab of the house in Olomouc
Velešík, Marek ; Požár, Michal (referee) ; Klusáček, Ladislav (advisor)
The bachelor thesis is focused on the design of the point supported reinforced concrete slab of the apartment building on Litovelská street in Olomouc. The slab is situated above the ground floor. Static calculations are based on internal forces of the computational model created in software SCIA Engineer 17.01. The correctness of computational model was verified by the method of summary bending moments. The main focus of the thesis was design procedures and assessments of point supported slab according to Eurocode 2: Design of concrete structures – Part 1-1: General rules and rules for buildings (ČSN EN 1992-1-1). The control of the design of reinforcement was performed in software SCIA Engineer 17.01.
|
|
|
Static design of building for accommodation
Jirčík, Jakub ; Perla, Jan (referee) ; Požár, Michal (advisor)
The topic of the bachelor thesis is static design of monolithic reinforced concrete beam and reinforced concrete columns of the third floor of the hostel in Rokycany. Element design is done using Scia Engineer and the control is done manually. The design was followed according to valid European standards ČSN EN 1992-1-1 and ČSN 73 1201. The result of this work is static design of reinforcement of reinforced concrete beam and column and drawing documentation.
|
|
|
Reinforced concrete structure of administrative building
Hejl, Zbyněk ; Požár, Michal (referee) ; Šulák, Pavel (advisor)
My bachelor thesis focuses on the design of selected parts of monolithic reinforced concrete structures of an administrative building. It is about a locally supported ceiling slab, an inner column and a staircase. Calculation of the internal forces was performed in the SCIA Engineer program and then verified by a hand method. The construction is assessed according to ČSN EN 1992 - 1 - 1.
|
|
|
Reinforced concrete flat
Marčanová, Martina ; Švaříčková, Ivana (referee) ; Požár, Michal (advisor)
The aim of the bachelor thesis is to design selected structures of the multi-storey department store. The supporting structure is a cast in place reinforced concrete frame. A reinforced concrete flat above the lowest floors, an inner column, a foundation pad and a prefabricated reinforced concrete staircase were selected for the work.
|
|
|
Reinforced concrete structure of a department store
Košík, Ondřej ; Požár, Michal (referee) ; Šulák, Pavel (advisor)
The bachelor thesis deals with the design and assessment of main parts of the carried reinforced concrete structure of a department store. The aim of the thesis was to design and evaluate the reinforced concrete structure of the ceiling slab, pillar, staircase and the wall. A graphical documentation of selected elements is also a part of the thesis. The calculation of internal forces was performed in a computational program SCIA Engineer 17, subsequently this calculation was verified by a manual method. The construction is designed according to the ČSN EN standards.
|
|
|
Roof construction of extinguishing systems
Mikulincová, Denisa ; Šulák, Pavel (referee) ; Požár, Michal (advisor)
The bachelor thesis deals with the assessment of the existing reinforced concrete structure of the roof on the fire extinguishing facility. The analysis is performed using the Scia Engineer program. A new design is also proposed. Roofing is done with a ribbed board. Part of the thesis is also an analysis of the possibilities of solving ribbed boards in the Scia Engineer program.
|
|
| |
|
| |
guest ::
RSS feed.