|
Book of Abstracts. 19th Youth symposium on experimental solid mechanics
Kytýř, Daniel ; Zlámal, Petr ; Pagliaro, A. ; Doktor, T.
The YSESM symposium provides a forum for young researchers and engineers, PhD students and students dealing with subjects of experimental mechanics. The Symposium concentrates on current work in all areas of experimental research and its application in solid and fluid mechanics. The topic will particularly concern to: Conventional and advanced experimental methods in solid and fluid mechanics - Non-destructive testing and inspection - Measurements in material science - Computer assisted testing and simulation - Engineering design simulation - Hybrid methods, experimental techniques – Numerical simulation - Optical methods and image processing - Measurements in biomechanics - Sensor techniques for micro- and nano-applications - Measurement methods for forensic engineering
|
|
Acta Polytechnica CTU Proceedings. Vol. 42 (2023)
Kytýř, Daniel ; Doktor, T. ; Zlámal, Petr
The YSESM symposium provides a forum for young researchers and engineers, PhD students and students dealing with subjects of experimental mechanics. The Symposium concentrates on current work in all areas of experimental research and its application in solid and fluid mechanics. The topic will particularly concern to: Conventional and Advanced Experimental Methods in Solid and Fluid Mechanics, Non-Destructive Testing and Inspection, Measurements in Material Science, Computer Assisted Testing and Simulation, Engineering Design Simulation, Hybrid Methods, Experimental Techniques – Numerical Simulation, Optical Methods and Image Processing, Measurements in Biomechanics, Sensor Techniques for Micro- and Nano-Applications, Measurement Methods for Forensic Engineering.
|
|
Book of Abstracts. 18th Youth Symposium on Experimental Solid Mechanics
Kytýř, Daniel ; Doktor, Tomáš ; Zlámal, Petr
The YSESM symposium provides a forum for young researchers and engineers, PhD students and students dealing with subjects of experimental mechanics. The Symposium concentrates on current work in all areas of experimental research and its application in solid and fluid mechanics. The topic will particularly concern to: Conventional and Advanced Experimental Methods in Solid and Fluid Mechanics; Non-Destructive Testing and Inspection, Measurements in Material Science, Computer Assisted Testing and Simulation, Engineering Design Simulation, Hybrid Methods, Experimental Techniques – Numerical Simulation, Optical Methods and Image Processing, Measurements in Biomechanics, Sensor Techniques for Micro- and Nano-Applications, Measurement Methods for Forensic Engineering.
|
|
High strain-rate compressive testing of filling materials for inter-penetrating phase composites
Doktor, T. ; Fíla, T. ; Zlámal, Petr ; Kytýř, Daniel ; Jiroušek, O.
In this study behavior of the selected types of filling material for the inter-penetrating phase composites was tested in compressive loading mode at low and high strain-rates. Three types of the filling material were tested, (i) ordnance gelatin, (ii) low expansion polyurethane foam, and (iii) polyurethane putty. To evaluate their impact energy absorption bulk samples of the selected materials were tested in compression loading mode at strain-rates 1000 s−1 to 4000 s−1. The high strain-rate compressive loading was provided by Split Hopkinson Pressure Bar (SHPB) which was equipped with PMMA bars to enable testing of cellular materials with low mechanical impedance. Based on the comparative measurement response to compression at both low and high strain-rates was analysed. The results show a significant strain-rate sensitivity of the ordnance gelatin and of the polyurethane putty, while strain-rate effect in the polyurethane foam was not observed.
|
| |
|
Acta Polytechnica CTU Proceedings
Kytýř, Daniel ; Major, Z. ; Doktor, Tomáš
The 16th symposium continues both the long tradition of this conference series and introduces novel elements. The YSESM 2018 symposium provides a forum for young researchers and engineers, students and PhD students dealing with subjects of experimental mechanics. In addition, the combination of the experimental mechanics with modern numerical methods will be a new focus of this 16th Symposium.
|
| |
|
Utilization of image and signal processing techniques for assessment of built heritage condition
Koudelka_ml., Petr ; Koudelková, Veronika ; Doktor, Tomáš ; Kumpová, Ivana ; Kytýř, Daniel ; Valach, Jaroslav
Historical buildings represent invaluable heritage from the past and therefore their protection is a very important task. Assessment of their condition must not cause damage accumulation thus the least possible volume removed from the structure is essential. As many historical buildings in the Czech Republic are built using sandstone that can be considered as a typical heterogeneous system, statistical signal processing is a promising approach for determination of the representative volume element (RVE) dimensions. Such calculations can be carried out on the domain of logical arrays representing binary images of the materials microstructure. This paper deals with processing of image data obtained using SEM-BSE and high resolution flatbed scanner for determination of RVE dimensions. Advanced image processing techniques are employed and results from calculation using grayscale data are presented and compared with results calculated on the basis of color input images.
|
|
Semi-automated assessment of micromechanical properties of the metal foams on the cell-wall level
Krčmářová, Nela ; Šleichrt, J. ; Doktor, T. ; Kytýř, Daniel ; Jiroušek, O.
Metal foams are innovative porous material used for wide range of application such as deformation energy or sound absorption, filter material, or microbiological incubation carrier. To predict mechanical properties of the metal foam is necessary to precisely describe elasto–plastic properties of the foam on cell–wall level. Indentation with low load is suitable tool for this purpose. In this paper custom designed instrumented microindentation device was used for measurement of cell-wall characteristics of two different aluminium foams (ALPORAS and ALCORAS). To demonstrate the possibility of automated statistical estimation of measured characteristics the device had been enhanced by semi-automatic indent positioning and evaluation procedures based on user-defined grid. Vickers hardness was measured on two samples made from ALPORAS aluminium foam and one sample from ALCORAS aluminium foam. Average Vickers hardness of ALPORAS foam was 24.465 HV1.019 and average Vickers hardness of ALCORAS was 36.585 HV1.019..
|
| |