|
|
Implementing of GSM modem in PBX Asterisk
Benýšek, Jiří ; Krajsa, Ondřej (referee) ; Šilhavý, Pavel (advisor)
Short Message Service (shortly SMS) is the most widely used type of communication systems. The main advantages are that allow a fast exchange of messages between devices, a very good availability through GSM and a reasonable price. Nowadays the SMS service support has expanded to include other technologies such as a service of the information navigation and the remote connection. The master‘s thesis concentrates on the Short Message Service, deals with basic principles and statements using by this service. The topic of the thesis is software PBX Asterisk and its possibility of SMS implementation, especially verification of SMS processing goes through the PSTN. After the basic introduction the master‘s work deals with the installation and configuration of the server. The main focus is on an installation of the operating system with an additional pack including necessary libraries and modules for a correct working of the server. The following section is paying attention to the Asterisk server configuration, especially a hardware card installation which is necessary for a connection with analog telephones, done by Bluetooth connections, set up user’s profiles of the SIP protocol and create a dial plan. This is followed by a verification of SMS option of the implementation and communication with GSM modem which is used as a gate for an exchange SMS between PSTN and GSM network. The last chapter of this master‘s thesis comes with the aimed results.
|
|
|
Billing system and call monitoring for PBX Asterisk
Depiak, Petr ; Šilhavý, Pavel (referee) ; Krajsa, Ondřej (advisor)
This master's thesis is focused on developement of billing system with the options of monitoring individual calls for software exchange Asterisk. Billing of calls is adaptible with the help of group of individual rules, consisting of tariff impulses, numerical prefix, with help of outgoing trunk and cost of the billed unit. The first part of this work is focused on instalation, configuration and preparation of individual components of the billing system. In this work is explained the architecture of the billing system and highlighted the purpose of work of the model database. Next we focused on the purpose and the principal system invidual function of the system including solution. At last there is a simple manual to operate the system with the help of created web interface.
|
|
|
Cross-platform performance testing of open source PBX FreeSWITCH
Melichar, Ondřej ; Kováč, Dominik (referee) ; Šilhavý, Pavel (advisor)
This bachelor’s thesis deals with the open source private branch exchange FreeSWITCH. The thesis describes the process of installation and consecutive configuration of the telephone system on various distributions of platforms Windows and Linux. Emphasis is placed on comparison of the performance between these systems and also the quality of calls as well as transcoding functionality. Specifically, the performance of the telephone system is tested while using the SIP protocol. Thesis also contains an introduction into the subject and a brief description of the FreeSWITCH architecture and its functions and capabilities.
|
|
|
Algorithms for decoding the Reed-Solomon error control code
Tieftrunk, Tomáš ; Číž, Radim (referee) ; Šilhavý, Pavel (advisor)
Thesis discuss about effort to ensure from error, which may occur during transmission over noisy channel. There's used Reed Solomon code. It's block, cyclic and systematic code, which is symbol orientated. Computational process of decoding is mathematically time-consuming. In thesis is closely described Berlekamp-Masey algorithm, used in decoding to evaluate error polynomial. Process is illustrated in application in Matlab. Practical realization uses Reed Solomon code in communication over RS232. Communication is established between computer and microcomputer.
|
|
|
Laser diodes controller utilizing AVR microcontroller
Boštík, Jiří ; Šilhavý, Pavel (referee) ; Krajsa, Ondřej (advisor)
This thesis deals with the design and subsequent realization of laser diode control devices. The circuit will be able to control the diode with using a laser driver, via a computer network or via the display for control current values, setting of initial values and more. The device will be connected also with a SD card for saving of settings. In the theoretical part there are described individual components that are needed for functionality of the device. The practical part contains a block diagram, in which is described complete feature of the device, then a draft scheme with a description of all integrated circuits and important components. At the end of this work is described the software that controls the entire designed device.
|
|
|
Automation of measurement of disturbance influence on DSL modem transmission
Dvořák, Tomáš ; Šedý, Jakub (referee) ; Šilhavý, Pavel (advisor)
Goal of this work was to develop software to control noise injector DLS-5410DC and noise generator DLS-5800 and be able to perform automatized measurement of tranmission parameters of DSL line.The first part describes different noises on DSL line. In second part is described the software, how it was designed and developed. Software allows user to remote control devices, edit and apply noise profiles and perform automatized measurement of transfer characteristics. Software was programmed in C\# programming language on .NET Framework 4.0 platform. For programming was used Microsoft Visual Studio 2012.
|
|
|
Turbo-convolution and turbo-block codes
Šedý, Jakub ; Krajsa, Ondřej (referee) ; Šilhavý, Pavel (advisor)
The aim is to explain the Turbo convolutional and block turbo codes and decoding the secure message. The practical part focuses on the design of a demonstration program in Matlab. The work is divided into four parts. The first two deal with theoretical analysis of coding and decoding. The third section contains a description created a demonstration program that allows you to navigate the process of encoding and decoding. The fourth is devoted to simulation and performance of turbo codes.
|
|
|
Device for demonstration of line coding
Navrátil, Marek ; Šilhavý, Pavel (referee) ; Číž, Radim (advisor)
This thesis aims proposal and implementation of laboratory equipment for generating Line codes. The theoretical part describes digital transmission of information and the individual Line codes. The practical part deals with the design and subsequent implementation of the entire device. The results of this works are the theme of device an apparatus for printed circuit boards, software for microcontroller measurement and results.
|
|
|
Vectoring in xDSL systems
Rada, Dominik ; Číž, Radim (referee) ; Šilhavý, Pavel (advisor)
This bachelor's thesis presents the approximation of VDSL2 and G.fast transmission systems according to pre-selected cable types. The thesis is also focused on the principle of vectoring and its use. The components of the thesis are explained by initialization process in modems with support of vectoring and approximation of Pre-Coder algorithms. A part of the thesis is a created user application in MATLAB, which displays the influence of vectoring on the transfer rates based on user input. In addition, the application captures primary and secondary line parameters, transmission characteristics, and transmitted masks.
|
|
|
Bonding, the method for increasing DSL data rate
Kratochvil, Tomáš ; Benešl, Lukáš (referee) ; Šilhavý, Pavel (advisor)
This bachelor thesis focuses on characteristics of DSL bonding technology. The basic information about DSL technologies is described at the start of theoretical part of thesis. VDSL2 technology is described more thorougfully in comparision with other DSL technologies, because in this thesis DSL bonding is applied on VDSL2 technology. Next chapter of theoretical part of thesis describes principe of DSL bonding technology. Final chapters of theoretical part of thesis describes recommendations for testing of network characteristics. Specifically these network testing recommendations are described: RFC 2544, RFC 6349 and Y 1564. The results of performed tests are presented in practical part of thesis. Tested DSL technologies are compared based on results of performed tests at the end of practical part of thesis.
|
guest ::
