|
|
Evaluation of pressure conditions in the quenching chamber of low-voltage device
Nevrzal, Filip ; Vávra, Daniel (referee) ; Valenta, Jiří (advisor)
In this master’s thesis there is firstly conducted research about pressure measurement. Next there is mathematical description of thermodynamic conditions in used testing chamber by using magnetohydrodynamic and Maxwell equations. Next chapter deals with testing chamber itself, more precisely with function, model and changes done to it. In practical part there are data measured by used sensors, which are also closer described in this chapter. In next chapter there is comparison of reaction times of used sensors and their frequency specters, obtaining using fast Fourier transformation. Second to last chapter introduces very measurement on the real device and in the last chapter these data are analyzed and more closely described.
|
|
|
Technologies of the electrical apparatuses protyping
Svoboda, Filip ; Kloc, Petr (referee) ; Šimek, David (advisor)
The work focuses on the production of prototypes of electrical devices. The theoretical part contains a structured overview of the historical development of prototype production technologies and description of individual prototyping technologies. The main part of the work is the design of a prototype extinguishing chamber, printing of the chamber and verification of the ability to extinguish the electric arc.
|
|
|
Investigation of correlation between arc voltage and arc movement
Szotkowski, Šimon ; Valenta, Jiří (referee) ; Kloc, Petr (advisor)
The electric arc burns in an ionized gas and is divided into AC and DC arc according to the power supply. The electric arc is conductive, so to turn off the electric circuit, the arc must be extinguished as soon as possible. Arc breakers are used to extinguish the arc. Arc breaker must be designed to withstand the increased pressures and temperatures caused by the arc. The purpose of the bachelor's thesis was to design and construct a arc breaker with the possibility of monitoring the movement of the arc with a high-speed camera. From the measured data, the dependence between the arc voltage and the movement of the arc root was determined by correlation analysis. Correlation analysis is used to calculate the possible existence of a dependence between two quantities with the correlation coefficient and testing.
|
|
|
Experimental verification of properties of circuit breaker quenching chamber
Kadrnka, Petr ; Vávra, Zdeněk (referee) ; Valenta, Jiří (advisor)
The circuit breakers are able to switch on and off automatically either the short circuit currents up to the limits of their breaking capacity. While the disconnection of the contacts in the switching devices are generated by the arc then it is needed to put it out quickly. A manner of the arcing in the electrical switching devices is influenced by several different factors. It must be taken into account the dynamics of a plasma, a current flowing in the electrodes, a flowing stream in a plasma and a magnetic field generated by a flowing current. This paper is devoted to describe the manner of the arcing in the arc chamber. The experiments carried out in an experimental way attempt to explain, specify and thoroughly comprehend the movements and the characteristics of the arc in a metal arc and in a metal enclosure circuit breaker.
|
|
|
Usage of CAD Systems in Area of Electrical apparatuses
Bojanovský, Lukáš ; Kuchyňková, Hana (referee) ; Valenta, Jiří (advisor)
This thesis presents current possibilities of parametric modelling. In the first section the new features of Autodesk Inventor Series 10 and process of designing model of arc chute cut of circuit-braker BD250 are described. A next section of the thesis describes funcionality of double contact element during switching off, creation and disappearance of electric arc. The principle of electric arc exctincion using magnetic exhaustion into arc chute with the participation of dynamic forces. The data format IGES was used for animation creation and also there is a short description of the history and origin of the format. The position animation in Autodesk Iventor 10 was used for designing animation.
|
|
|
Switching arc plasma diagnostics by usage of two high-speed cameras
Buchta, Martin ; Dostál, Lukáš (referee) ; Valenta, Jiří (advisor)
This bachelor thesis deals with an electrical arc formation and its properties. The thesis also describes some of the electrical devices and principles, which are used for arc extinction. It is mainly focused on design, construction and testing of model of the LV quenching system, which allows high speed cameras to record arc movement. Recorded images are then used to create three-dimensional reconstruction of the electric arc with help of created program 3DMaker. The final reconstruction is the output of this work.
|
|
|
Technologies of the electrical apparatuses protyping
Svoboda, Filip ; Kloc, Petr (referee) ; Šimek, David (advisor)
The work focuses on the production of prototypes of electrical devices. The theoretical part contains a structured overview of the historical development of prototype production technologies and description of individual prototyping technologies. The main part of the work is the design of a prototype extinguishing chamber, printing of the chamber and verification of the ability to extinguish the electric arc.
|
|
|
Investigation of correlation between arc voltage and arc movement
Szotkowski, Šimon ; Valenta, Jiří (referee) ; Kloc, Petr (advisor)
The electric arc burns in an ionized gas and is divided into AC and DC arc according to the power supply. The electric arc is conductive, so to turn off the electric circuit, the arc must be extinguished as soon as possible. Arc breakers are used to extinguish the arc. Arc breaker must be designed to withstand the increased pressures and temperatures caused by the arc. The purpose of the bachelor's thesis was to design and construct a arc breaker with the possibility of monitoring the movement of the arc with a high-speed camera. From the measured data, the dependence between the arc voltage and the movement of the arc root was determined by correlation analysis. Correlation analysis is used to calculate the possible existence of a dependence between two quantities with the correlation coefficient and testing.
|
|
|
Evaluation of pressure conditions in the quenching chamber of low-voltage device
Nevrzal, Filip ; Vávra, Daniel (referee) ; Valenta, Jiří (advisor)
In this master’s thesis there is firstly conducted research about pressure measurement. Next there is mathematical description of thermodynamic conditions in used testing chamber by using magnetohydrodynamic and Maxwell equations. Next chapter deals with testing chamber itself, more precisely with function, model and changes done to it. In practical part there are data measured by used sensors, which are also closer described in this chapter. In next chapter there is comparison of reaction times of used sensors and their frequency specters, obtaining using fast Fourier transformation. Second to last chapter introduces very measurement on the real device and in the last chapter these data are analyzed and more closely described.
|
|
|
Switching arc plasma diagnostics by usage of two high-speed cameras
Buchta, Martin ; Dostál, Lukáš (referee) ; Valenta, Jiří (advisor)
This bachelor thesis deals with an electrical arc formation and its properties. The thesis also describes some of the electrical devices and principles, which are used for arc extinction. It is mainly focused on design, construction and testing of model of the LV quenching system, which allows high speed cameras to record arc movement. Recorded images are then used to create three-dimensional reconstruction of the electric arc with help of created program 3DMaker. The final reconstruction is the output of this work.
|
guest ::
