|
|
Design of strengthening of the concrete structure from 1928
Bažantová, Lenka ; Pinkas, Karel (referee) ; Klusáček, Ladislav (advisor)
The bachelor’s thesis is focused on assessment of the existing construction four-storey building. The supporting system consists of cast-in-place concrete frame. The aim of this work is to assess the support structure for the expected loading of the resulting change in use of buildings for residential or commercial purposes. The subjects of assesment are columns, beams, girders and floor slab. In another part of work is suggested by reinforcement of non-conforming elements. The work includes the development of stroctural analysis and reinforcement drawings of reconstructed elements.
|
|
|
Monolithic concrete building at sewerage plant
Klimeš, Petr ; Bažant, Zdeněk (referee) ; Strnad, Jiří (advisor)
Bachelor's thesis deals with design of monolithic concrete construction with a timber roof truss for a device of sewerage plant. This construction consists of these elements- strip foundation, walls with lintels, slab and timber trusses. This thesis contains static analysis of the component parts and their drawing documentation.
|
|
| |
|
|
The assessment of existing industry hall structure
Hamrlík, Martin ; Chalabala, Jiří (referee) ; Klusáček, Ladislav (advisor)
The bachelor's thesis is focused on an assessment of existing industry hall structure of a rectangular floor plan. The supporting system design consists of a precast reinforced concrete skeleton. The aim of this work is to determine the structure of the expected loading of a new crane runway. The subjects of assesment are columns, girder of crane runway, short corbel and concrete foot. In other part of the project is designed reinforcement nonconforming elements. The work includes the development od structural analysis, drawing of hall structure and reinforcement drawings of reconstructed elements.
|
|
|
Reinforced Concrete Frame - Design of Selected Part of the Building
Hardubej, Martin ; Zlámal,, Martin (referee) ; Švaříčková, Ivana (advisor)
The thesis is focused on an assessment of existing structures at the four-storey apartment building. The supporting system design consists of a monolithic reinforced concrete skeleton. The subjects of assessment are girders, columns, beams and continuous slab. Another part of the project focuses on the design for reconstruction of nonconforming elements, which are the girders and beams. The work includes the development of structural analysis and reinforcement drawings of reconstructed elements.
|
|
|
Design of load-bearing structures of residential building in Prague
Cetkovský, Jan ; Hrubý, Tomáš (referee) ; Požár, Michal (advisor)
The diploma thesis is aimed for design of load-bearing structures of residental building. The designed parts of building are reinforced concrete two way slab with lintels above 1th floor, reinforced concrete two way cantivelered slab above ground floor, reinforced concrete point-supported slab below ground floor, reinforced concrete columns in basement, reinforced concrete staircase in basement and static check of loadbearing walls in ground floor. The thesis contains static design, which is provided in calculated software RFEM Dlubal 5.07. The result of static design is drawing documentation of these calculated elements.
|
|
|
Design and review of selected items of reinforced concrete structure
Leitner, Ivan ; Švaříčková, Ivana (referee) ; Šimůnek, Petr (advisor)
The Bachelor thesis is dealing with the design and assesment of bearing reinforced concrete slab of office building. The ceiling slab is located above the 1st floor. Internal forces were calculated by software Scia Engineer and the results are compared with manual method - Equivalent frame method. The next part of bachelor thesis is the assessment of slab to punching effect and design of the corner column using the interaction diagram. Finally it is performed design of reinforced concrete staircase.
|
|
|
Design of structure for football pitch
Popovič, Tomáš ; Sliwka, Pavel (referee) ; Zich, Miloš (advisor)
This diploma thesis deals with the static review of structure for a football pitch. It is crosswise prestressed reinforced sliding plate with variable cross section. Assessment of the elements was done according to limit states. Internal forces from the load effects were calculated using the SW SciaEngineer 2015.1. The elements were assessed by SW Idea StatiCa 6. The main outputs of this static calculation are drawings of the shape and drawings of the reinforcement.
|
|
|
Design of the point supported slab of the house in Olomouc
Velešík, Marek ; Požár, Michal (referee) ; Klusáček, Ladislav (advisor)
The bachelor thesis is focused on the design of the point supported reinforced concrete slab of the apartment building on Litovelská street in Olomouc. The slab is situated above the ground floor. Static calculations are based on internal forces of the computational model created in software SCIA Engineer 17.01. The correctness of computational model was verified by the method of summary bending moments. The main focus of the thesis was design procedures and assessments of point supported slab according to Eurocode 2: Design of concrete structures – Part 1-1: General rules and rules for buildings (ČSN EN 1992-1-1). The control of the design of reinforcement was performed in software SCIA Engineer 17.01.
|
|
|
Comparison of RC structure design approach according to EC and EN
Hamrlík, Martin ; Laníková, Ivana (referee) ; Šimůnek, Petr (advisor)
The thesis is focused on the opinion of an office building from the perspective of two different standards and comparing their approaches. These standards is a currently valid European Standard EN 1992-1-1 (EC2) and standard according to US standards ACI 318-11. In this work were considered pillars in the second basement and on the first floor. Was also assessed locally supported slab above the 1st floor and staircase connects the individual floors. All the completed elements were assessed according to the 1st ultimate limit state.
|
guest ::
