|
Strenghtening of the load bearing parts of the production hall
Čížová, Kateřina ; Pinkas, Karel (referee) ; Klusáček, Ladislav (advisor)
The diploma thesis deals with the strenghtening of the supporting parts of the production hall in Drásov. In the first part the existing load bearing capacity of the structure is solved. The next step is to design of strenghtening variants for nonconforming columns and short corbel. Columns and short corbel are strenghtening with monostrand. At the end of the thesis, verification of the load bearing capacity of the strenghtening structure is performed.
|
|
Roof beam in the industry hall
Šnobltová, Simona ; Bobek, Lukáš (referee) ; Klusáček, Ladislav (advisor)
The bachelor’s thesis deals with the assessment of the existing roof girder in the industrial hall and subsequent outline of strengthening this construction. The girder is located in an industrial hall in Lanškroun and its original design is dated from 1998. Nowadays, cracks appear on the girder, therefore it is necessary to reassess it according to the current valid standards ČSN EN. The girder is appraised for the ultimate limit state, thus for bending and shear, and also for the serviceability limit state, thus for the pressure limit, width of cracks and transformation. Due to the fact, that not all assessments pass, hence a suitable structure strengthening with a MonoStrand prestressing strands is designed and the construction is reassessed again. For the control of a manual calculations of the internal forces on girder, was created a structural model in a program called Scia Engineer.
|
|
Design of the engineering structure
Svoboda, Adam ; Volf, Marek (referee) ; Klusáček, Ladislav (advisor)
The bachelor thesis deals with design issues of industrial buildings and is focused especially on design and assessment of short corbels. The first part of the thesis consists of a translation of technical text published by prof. J. Schlaich (E DIN 1045-1). In the second part of the thesis is the gained knowledge applied on assessment of existing industrial structure SUAS a.s. in Vřesová. For the analysis of short corbels is used the strut-and-tie model and the method of limitation of concrete compressive stress at the nodes of the strut-and-tie model. The thesis concludes with structural strengthening of nonconforming short corbels by using prestressed cables to ensure safe operation of the crane runway.
|
|
Roof beam in the industry hall
Šnobltová, Simona ; Bobek, Lukáš (referee) ; Klusáček, Ladislav (advisor)
The bachelor’s thesis deals with the assessment of the existing roof girder in the industrial hall and subsequent outline of strengthening this construction. The girder is located in an industrial hall in Lanškroun and its original design is dated from 1998. Nowadays, cracks appear on the girder, therefore it is necessary to reassess it according to the current valid standards ČSN EN. The girder is appraised for the ultimate limit state, thus for bending and shear, and also for the serviceability limit state, thus for the pressure limit, width of cracks and transformation. Due to the fact, that not all assessments pass, hence a suitable structure strengthening with a MonoStrand prestressing strands is designed and the construction is reassessed again. For the control of a manual calculations of the internal forces on girder, was created a structural model in a program called Scia Engineer.
|
|
Strenghtening of the load bearing parts of the production hall
Čížová, Kateřina ; Pinkas, Karel (referee) ; Klusáček, Ladislav (advisor)
The diploma thesis deals with the strenghtening of the supporting parts of the production hall in Drásov. In the first part the existing load bearing capacity of the structure is solved. The next step is to design of strenghtening variants for nonconforming columns and short corbel. Columns and short corbel are strenghtening with monostrand. At the end of the thesis, verification of the load bearing capacity of the strenghtening structure is performed.
|
|
Design of the engineering structure
Svoboda, Adam ; Volf, Marek (referee) ; Klusáček, Ladislav (advisor)
The bachelor thesis deals with design issues of industrial buildings and is focused especially on design and assessment of short corbels. The first part of the thesis consists of a translation of technical text published by prof. J. Schlaich (E DIN 1045-1). In the second part of the thesis is the gained knowledge applied on assessment of existing industrial structure SUAS a.s. in Vřesová. For the analysis of short corbels is used the strut-and-tie model and the method of limitation of concrete compressive stress at the nodes of the strut-and-tie model. The thesis concludes with structural strengthening of nonconforming short corbels by using prestressed cables to ensure safe operation of the crane runway.
|