|
|
Electroerosion wire cutting of technical ceramics
Habovštiaková, Mária ; Mouralová, Kateřina (referee) ; Osička, Karel (advisor)
The presented diploma thesis deals with the issue of wire electrical discharge machining of SiSiC ceramics. The first part explains the principles of electrical discharge machining, describes the WEDM technology and presents the properties of the advanced ceramics. The second part consists of a detailed analysis of the cutting process of eighteen samples obtained with systematically changing process parameters. Based on the obtained results from EDX analysis, SEM electron microscopy and topography there was performed an analysis of the influence of process parameters on the cutting speed, surface roughness, kerf width and number of wire breaks with usage of the selected brass cutting wire. From the evaluated results it was possible to select a combination of parameters that ensured a stable machining process.
|
|
|
Analysis of defects of copper alloy after wire electrical discharge machining
Vontor, Jakub ; Osička, Karel (referee) ; Mouralová, Kateřina (advisor)
Electrical discharge wire machining, which represents non-conventional machining technology is up on very high technological level. However, due to this type of machining many of defects are set on the material and the quality of machined surface is changed according to set parameters of machine. Complex study was created with the aim of optimization these parameters according to final quality of surface and right wire speed. This study include experiment with 33 samples, every of these samples was machined with different parameters, results of these machining were analyzed.
|
|
|
Material of electrodes for electrical discharge machining
Bednář, Šimon ; Chladil, Josef (referee) ; Osička, Karel (advisor)
Diplomová práce se zabývá problematikou volby grafitového materiálu využívaného pro výrobu nástrojových elektrod při elektroerozivní obrábění. Práce je rozdělena do třech částí. Teoretická rešerše nekonvenční technologie elektroerozivního obrábění vypracovaná dle uvedených zdrojů se nachází v první části práce. Dále je v práci proveden cenový průzkum EDM grafitových materiálů nabízených v České republice a na Slovensku. Čtyři odlišné stupně kvality grafitu (od stávajícího dodavatele firmy GAMARTIS TRADE s.r.o.) a jeden měděný materiál byly podrobeny experimentu, jehož účelem bylo zjištění závislosti mezi kvalitou grafitového materiálu (cena) a přesností vyhloubené kavity, opotřebením nástrojové elektrody, časem obrábění nebo také drsností povrchu.
|
|
| |
|
|
Production of the mold plunger
Rosa, Jakub ; Chladil, Josef (referee) ; Osička, Karel (advisor)
The meaning of the diploma thesis is to create a new mold plunger for injection mold using a suitable method according to the original mold plunger. The final mold part should meet the required surface parameters. The work is focused on the analysis of the original mold plunger and the experimental verification of suitable methods of production of the equivalent mold plunger.
|
|
| |
|
| |
|
|
Technology of wire electrodischarge
Tichý, Štěpán ; Mouralová, Kateřina (referee) ; Osička, Karel (advisor)
This master’s thesis deals with technology of wire electrical discharge machining in theoretical and practical level. Theoretical part of the thesis explains in detail the principle of electrical discharge machining, describes functional parts and settings of a current wire EDM machines and also the possibility of using method for production of specific parts. Practical part of the thesis solves manufacturing of gearing on pinion manufactured by wire cutter EXCETEK V650 and statistically evaluates precision parameters on surfaces of the carriers taken by specific technological conditions with the same machine.
|
|
|
Application of wire electrodischarge technology
Barabáš, Martin ; Mouralová, Kateřina (referee) ; Osička, Karel (advisor)
This marter’s thesis deals with the technology of electrical discharge wire cutting. There is described the basic nature of the electrical erosion, EDM principle and WEDM principle. The main part deals with the application of wire cutting in the manufacture pulley 68-8M-130 with a description of technology on the wire cutter Excetek V 650. At the end of the work is devoted to the statistical evaluation of the precision machined surfaces.
|
|
|
Technology of wire electrical discharge machining
Brázda, Radim ; Krkavec, Martin (referee) ; Osička, Karel (advisor)
This master´s thesis deals with unconventional technology of wire electrical discharge machining. There are described the principles and essence of electrical discharge machining and the principles related to wire electrical discharge machining with emphasis on the application of this technology in terms of medium-sized engineering company. There is also described the complete assembly of technolgy wire cutting and machining on wire cutter Excetek V 650. Then in the work there are statistically evaluated parameters precision machined surfaces, specifically to the belt pulley 116-8M-130. At the end of the work there is the technical-economic evaluation that addresses the hourly cost of machining on wire cutter Excetek V 650.
|
guest ::
