|
|
Design of Selected Elements of Storeyed Building
Ducháč, Josef ; Horák, David (referee) ; Švaříčková, Ivana (advisor)
The Master´s thesis is focused on the assessment basic parts of the story building. All construction is made from reinforced concrete. The columns, flat plate slabs, flanges and stairways are between the design constructions. The thesis includes working-out of static calculation, drawing shape, reinforcement drawing of all design constructions and results from computer sofware.
|
|
|
Reinforced concrete structure
Hasala, Ivo ; Kraut, Jan (referee) ; Šulák, Pavel (advisor)
In my master´s thesis I deal with static solution of basic elements of reinforced concrete building with two abovegrounds and one underground storey. The selected elements are piles, roof board D1, column S1 in 2NP, stairway SK1 in 1NP, beam Z1 in 2NP, wall ST6 in 2NP, exterier board near the steel stairway. The component of my master´s thesis is comparing of my own calculation of moments and computer calculation of roof board D1. In the last point I compare a behavior of the structure with solid support and with piles.
|
|
|
Solution of transfer junction on the Konečného square in Brno after putting the line NSRLD into operation
Rosík, Jan ; Veselý, Josef (referee) ; Smělý, Martin (advisor)
My master‘s thesis is concerned with study of location of tram stop, part od North - South Railway Line Diameter, which is supposed to be in underground level below Konečného square, important transfer junction. According to this location find out the best place to situate pedestrian exits and elevators in nearby streets Nerudova, Kotlářská and Veveří. After building up the station, pedestrian transfers will be safer and time to get into the centre of Brno/ job for commuter people will be shortened. This master thesis also deals with enlargement of tram islands, repositioning of trolleybus stop from Kotlářská street, movement of pedestrians in area and optimization of traffic lines.
|
|
|
Family house with a brewery T: O: P in Jevíčko
Němeček, Pavel ; Vávra, Petr (referee) ; Brzoň, Roman (advisor)
Bachelor´s thesis is focused on a project of a detached family house with a brewery T:O:P on a site 88/13 and 88/14 in a Jevíčko. Bachelor´s thesis is drawn in a project documentation for the realization of building. The house has two floors without cellarage, rectangular plan with flat roof, based on strip foundations made of a simple concrete. Vertical frameworks are devised from masonry type therm from Porotherm. Horizontal frameworks are from ceiling panels Spiroll. External wals are warmed by a contact system from polystyrene. Entry into the brewery premises and residential units, located on the second floor, is oriented to the southeast, entrance to the brasserie on the southwest. 1.NP is divided into two service. The service brewery with his technological background and administrative background brewer. The second service is brasserie brewery with his social service and visitors. Housing unit is separated from the brewery and brasserie ceiling constructions and has its own entrance from the open air.
|
|
|
Detached House with Stained Glass Studio
Ruszová, Veronika ; Blažek, Petr (referee) ; Fišarová, Zuzana (advisor)
The bachelor thesis focuses on a family house and a workshop.The family house is designed as a new two-floor building without a cellar. The workshop is designed as a new one-floor building without cellar. The buildings will be placed on foundational zones with additional foundational panel. Perimeter supporting and inner supporting walls are constituted by sand-lime bricks SENDWIX 8DF-LD. Ceiling ceramic construction KMB MIAKO is used above the whole first floor. Above the second floor is the roof construction made up from wooden tie beams G-N, which serve as ceiling as well. The roof of the workshop is made from wooden tie beams G-N. The staircase leading from the first to the second floor is made out of reinforced concrete.
|
|
|
Family house with establishment
Zornová, Lucie ; Smolík, Jindřich (referee) ; Čupr, Karel (advisor)
Bachelor thesis deals with the Family house with establishment and is solved as a new building with cellar and with one overground floor and residential attic. The object will be based on the strip foundation in addition with the baseplate. Perimeter bearing walls in the underground floor is made with the use of lost formwork BEST. Perimeter bearing walls in the overground floor consist of the PORFIX porous concrete blocks. Ceilings are made from the PORFIX ceiling system. Stairway from the basement is from the reinforced concrete, stairway from overground floor is wooden with the mortised stringers.
|
|
|
Reinforced concrete structure of a administrative building
Januš, Ondřej ; Švaříčková, Ivana (referee) ; Šulák, Pavel (advisor)
The main subject of this bachelor thesis is focused on the design of reinforced concrete locally supported slab of a multifunction building. Internal forces are calculated by a computer software SCIA Engineer and its resultes are compered with simplifield method. Another part includes the design of a reinforced concrete stairway and a column situated in the center of the disposition. The calculation method is based on ČSN EN 1992-1-1.
|
|
|
Family House
Veselý, Adam ; Poláček, Lukáš (referee) ; Moudrý, Ivan (advisor)
The family house is designed as a full-basement structure, with one basement and two above grade storeys. The access to the building is realized by reinforced concrete stairway. Basement enter by car is under a tilt of 10%. The main entrance to the building is located on the first floor and leads you to the entry. Garage is located right in the basement as well as fire-room with laundry, technical room, cellar, WC and stairway leading to the first floor, where the living room linked by kitchen with dinning room is situated, as well as there is buttery, study room, bathroom with WC and stairway to basement and second floor there. In the second floor you can find two childrens’ rooms one of which dispose of balcony, then bedroom with dressing-room, storage room and bathroom with WC. The facade of the building is as External Thermal Insulation Contact System (ETICS), roofed by platform of 3% tilt covered by grey color hydro-insulation Construction of foundation is realized on strip footing and bearing plates. The structural system of first and second floor is brickwork consisting of ceramic building blocks POROTHERM 30 P+D, basement structural system is furring blocks grouted-in by concrete reinforced with steel bars (sacrificial formwork). The ceiling is realized as ceramic-concrete structure POROTHERM of thickness 250 mm. Heating is provided by gas condensing boiler, which is set in fire-room in basement.
|
|
|
Detached house
Kolář, Michal ; Kalábová, Tereza (referee) ; Bečkovský, David (advisor)
In this bachelor thesis I am focusing on a project of a detached family house on a site 5017 in a village Radiměř. Proposed category of a flat is 4+1. Family house is designed according to an irregular platform 14,84x8,08m. The house has two floors with a habitable attic, without cellarage. Downstairs there is a space behind a door, technical room, a toilet a storage room, a storage room under the stairway, two-ply stairs, a living room and a kitchen. The family house includes a garage for one car and with enough storage space. Upstairs there is a bathroom, 2 rooms and a bedroom. The house is based on strip foundations made of a simple concrete. Vertical and horizontal frameworks are devised from cellular concrete blocks Ytong. Enclosure wall is insulated by boards Ytong Multipor. The roof is anticlinal with a 40 degrees deflection. The entering side is orientated to the east. The living room is orientated to the south and the west, which makes the place shiny enough and furthermore there is an entrance to the platform. In addition there is also a bachelor seminar thesis on a following topic Insulation and insulation systems.
|
|
|
Family house with an establishment
Hlaváček, Petr ; Píštěk, Rostislav (referee) ; Daněk, Lukáš (advisor)
The new family house without cellar, with garage and an establishment – hairdressing salon. The object is based on strip foundation. The footing bottom is in frost resistant depth. Construction system is in both ways. Vertical walls are made by cut bricks POROTHERM. The external cladding is replenished by thermal insulation plaster POROTHERM TO. Horizontal constructions are made by ceramic girders and insert POROTHERM. Stairway is made by reinforced concrete. Heating system is ensured by gas boiler.
|
guest ::
