|
| |
|
|
Fuels from Biomass.
Poskočil, Milan ; Píštěk, Václav (referee) ; Rauscher, Jaroslav (advisor)
Bachelor´s thesis deals with the study of the status quo use of fuels derived from biomass for automotive engines and their prospects. The goal of this work is processing the inventory of motor fuels derived from biomass, their utilization and illustrate the developments in this field. The work is focused mainly on the situation and developments in the Czech Republic.
|
|
| |
|
| |
|
|
Crank mechanism of in-line four-cylinder spark ignition engine
Marek, Petr ; Rauscher, Jaroslav (referee) ; Píštěk, Václav (advisor)
Objective of this bachelor’s thesis is for given geometric, thermodynamic and operation parameters cylindrical unit of in-line four-cylinder spark ignition engine perform calculation of thermodynamic cycle, project basic proportion of piston group and for given operation modes perform strength check of connecting-rod eye. In the introduction is described ordinary use of spark ignition engines, several details of history of their evolution and present most widly used construction. Major text of bachelor’s thesis attend to four main chapters: description of thermodynamic cycle, calculation of forces reacting to piston, strength calculation and check of piston pin and of connecting-rod eye. Supplement consists of accomplishment of these calculations and a few of graphs. In the conclusion is evaluation of performed calculations and there are mentioned technological directions of present evolution of gas-engine.
|
|
|
Powertrain of in-line four-cylinder spark ignition engine
Parchański, Martin ; Rauscher, Jaroslav (referee) ; Píštěk, Václav (advisor)
Objective baccalaureate work is count for engaged four - cylindrical petrol motor geometric, thermodynamic and operation parameters and subsequently rated funds make up real motor and strike a balance. Perform calculation thermodynamic cycle simulation power cycle and draw p- c diagram, assesment basic size piston and piston pin, assesment inertial force applied on piston group, calculation specific pressure and tension at piston pin, assesment basic proportions connecting rod, calculation tension in connecting-rod eye in consequence heating - up bronze chuck, assesment maximum tension in connecting-rod eye in consequence inertial force and from pressures gas and determine safety against yield strength and endurance strenght. In introduction work is schematic working principle gas engine motor and schmatic most frequent principle raising achievement. At the close are capitalized computing result.
|
|
| |
|
|
Powertrain of in-line five-cylinder spark ignition engine
Hájek, Daniel ; Rauscher, Jaroslav (referee) ; Píštěk, Václav (advisor)
Objective of bachelor’s thesis is, for noted geometric, thermodynamic and operation parameters cylindrical unit of five-cylinder spark-ignition engine, perform calculation of thermodynamic cycle, project basic proportion of piston group and for noted operation modes perform strength check of connecting-rod eye. Rated value verify, if corresponded with true value of spark-ignition engine. In preamble is stated basic use of spark-ignition engines, their operation principle and design concept. The bachelor’s thesis is consists from description of calculation and supplement, where is calculation done. The calculation is consists from three parts. The first part is calculation of thermodynamic cycle, in the second part are calculated forces reacting to piston group and third part is strength calculation and check of connecting-rod eye. In the last part is results evaluation of calculation, show a methods of calculation and a new trends spark-ignition engine of evolution.
|
|
|
Crank mechanism of in-line three-cylinder diesel engine
Cetkovský, Martin ; Rauscher, Jaroslav (referee) ; Píštěk, Václav (advisor)
Objective bachelor’s thesis, which will be achived is, for scheduled elementary geometric, thermodynamic and operation parameters cylindrical unit of in-line three-cylinder diesel engine, perform calculation of thermodynamic cycle, design elementary dimensions of piston group and for schedule operation modes perform strength check of connecting-rod eye. Consequently rating value compare with value of real true diesel engine. In introduction is explained basic principle of diesel engine and their design concept. The bachelor’s thesis is consisted of description of calculation and supplement, where the calculation is done. The calculation is accomplished in three parts. Thermodynamic cycle is solved in the first part. Forces acting on piston group are solved in the second part and strength calculation and check of connecting-rod eye is solved in the third part. The end is focused on evaluation of calculation and recent solution of diesel engine.
|
|
|
The present state and development trends of tractors.
Valach, Přemysl ; Píštěk, Václav (referee) ; Rauscher, Jaroslav (advisor)
Přemysl Valach The present state and development trends of tractors. The aim this Bachelor thesis is to summarize the contemporary states of internal combustion engines in tractors and requirements on them. The overview of internal combustion engines was made and it also constains a brief characteristics and descriptions of these engines. At the end of this work there is a description of historical development and there are olso mentioned trends for the future.
|
guest ::
