|
|
Coarse graded asphalt mixtures
Mucha, Ondřej ; Dašek, Ondřej (referee) ; Hýzl, Petr (advisor)
The bachelor’s thesis is focused on asphalt mixtures that contain coarser aggregates than currently allowed by technical regulations in the Czech Republic. The introductory part of the work describes the composition of asphalt mixtures, their division and use. Further deals with foreign experience with these types of asphalt mixtures and their use in the surrounding European countries and in the United States of America. The aim of this work is to obtain a theoretical overview of knowledge about coarse graded asphalt mixtures from foreign sources and research.
|
|
|
Simple design of the improved soils to subgrade pavement
Hurtiš, Maroš ; Hýzl, Petr (referee) ; Stehlík, Dušan (advisor)
This bachelor thesis describes improvement of soils to subgrade pavement. It defines basic expressions, which we are taking in consideration by. Next we are talking about each parameter, which has to be included in final subsoil and which tests are suitable for these parameters. We are decribing California Bearing Ratio in detail and its test. This thesis study context between pH and CBR. Change between these two subjects is caused by addition of a binder. We are practically proving this causes in practical part of bachelor thesis.
|
|
|
Modification of asphalt mixtures
Zeleňák, Matej ; Hýzl, Petr (referee) ; Dašek, Ondřej (advisor)
This master’s thesis studies impact of direct-to-plant SBS polymer on properties of asphalt binder and asphalt mixture. It uses a new modification additive. The addition takes place directly during the mixing in the plant. This technology is not commonly used in Czech Republic. The theoretical part of this thesis describes current experiences with this method of modification. The procedures of laboratory tests needle penetration, softening point, elastic recovery, stiffness and low-temperature properties are described. The practical part presents values measured during preparation of test samples. Furthermore, it analyses the test results of the binders and mixtures in detail. The thesis concludes by evaluation of each test result and by summarization of the findings.
|
|
|
Cold recycling
Šperka, Pavel ; Stehlík, Dušan (referee) ; Hýzl, Petr (advisor)
Bachelor’s thesis focuses on the processing of knowledge of flexible pavements cold recycling, especially on the technologies if full depth reclamation and partial cold recycling in-place and the benefits or reasons for the increased use in the Czech Republic. In the practical part of the thesis the current status of selected sections, which were made by practical cold in-place recycling technology, is evaluated. In the end of the work the success of this technology is evaluated.
|
|
|
Coarse-grained asphalt concretes
Škorík, Michal ; Dašek, Ondřej (referee) ; Hýzl, Petr (advisor)
This diploma thesis deals with the design of coarse-grained asphalt concrete for base courses with aggregates up to 32 mm in size. The theoretical part describes current issues related to the shortage of natural aggregate in the Czech Republic and introduces the reader to the knowledge of coarse-grained asphalt mixtures used in the Czech Republic and abroad. The practical part focuses on the design of asphalt mixtures for base courses AC 32 50/70. It further describes in detail the process of laboratory production of the asphalt mixture and individual functional and empirical tests. In the last part parameters as modulus of stiffness, resistance to low temperatures and resistance to permanent deformations are evaluated.
|
|
| |
|
|
Using Reclaimed Asphalt Pavement in High Modulus Asphalt Mixture for Binder Asphalt Courses
Klimek, Matěj ; Hýzl, Petr (referee) ; Šperka, Pavel (advisor)
The bachelor thesis deals with design of high modulus asphalt mixture with using 30 % reclaimed asphalt pavement in combination with polymer modified bitumen. The goal of this thesis is to verify if the mixture reaches the requirements of technical regulations TP 151 [1]. Selected tests were performer in accordance with the European standards ČSN EN 12697 Bituminous mixtures – Test methods for hot asphalt mixtures. Theoretical part of my thesis is focused on possibilities of addition higher amounts of reclaimed asphalt pavement into asphalt mixtures.
|
|
|
Resistance to fuel of asphalt mixtures
Koželuhová, Jana ; CSc, Vladimír Adamec, (referee) ; Hýzl, Petr (advisor)
Aim of the Master’s thesis is analysis of problems of the dangerous goods road transportation, especially transport of flammable liquids. It analyses the European Agreement concerning the International Carriage of Dangerous Goods by Road and its special requirements. Thesis also covers road tanker accidents and the removal of leaked petroleum products. In practical portion the work on resistance testing of asphalt mixtures against several types of fuel is presented.
|
|
|
Recycled material in Stone mastic asphalts
Motl, Vojtěch ; Coufalíková, Iva (referee) ; Hýzl, Petr (advisor)
The Bachelor’s thesis deals with an issue of adding a Reclaimed asphalt pavement (RAP) into surface courses, especially SMA 11S. The thesis is divided into two parts – theoretical and practical. The theoretical part defines the term RAP and explains how to gain RAP and how to use it for a hot recycling at asphalt plants. The practical part deals with the design of asphalt mixture containing 30 % of RAP, the preparation of test specimens, the description of executed tests and the results of those tests. The results are compared with SMA 11S without RAP.
|
|
|
Influence of usage of recycled material on asphalt mixtures functional properties
Šperka, Pavel ; Hegr, Zdeněk (referee) ; Hýzl, Petr (advisor)
Diploma thesis deals with the topic of using recycled material in the production of asphalt mixtures. In the theoretical part the methods of recycling flexible pavement are described and as well as ways in which recycled material is added to asphalt mixtures produced by the stationary hot mix plant. The thesis also deals with the current state of recycled material use in the Czech Republic and the reasons for its possible greater use. The practical part of the thesis studies the effect of using the amount of 20% recycled material to asphalt mixtures of asphalt concrete for wearing course ACO11+, on selected functional properties of these mixtures. It is also investigates the influence of bitumen binder contained in the recycled material, on the final properties in manufactured asphalt mixtures. An integral part of this thesis is a description of all methods that were used during the processing of the practical part. In the end of this thesis there are some results of findings about adding recycled material into asphalt mixtures.
|
guest ::
