Original title:
Rotačná kapacita prípojov na mostných konštrukciách
Translated title:
The Initial Rotational Stiffness of Connections on the Bridge Structures
Authors:
Štecák, Róbert Document type: Papers
Language:
slo Publisher:
Vysoké učení technické v Brně,Fakulta stavební Abstract:
[slo][eng]
Výpočet rotačnej kapacity prípojov na oceľových mostoch je nesmierne dôležitou súčasťou výpočtov. Zväčša železničné mosty majú často viac ako 60 rokov. Tieto mosty sú stále zaťažované vlakovou dopravou a ich diagnostika je nevyhnutná, pre ich bezpečné fungovanie. Práve prípoje sú kritickým miestom. Ich správny výpočet je dôležitý pre správe určenie ich životnosti či zaťažiteľnosti. Práve rotačná kapacita umožňuje namodelovať prípoje tak, aby čo najviac zachytili realitu. Nanešťastie, postup v Eurokóde nie je úplne jasný. Výpočet rotačnej kapacity je v norme uvádzaný len pre budovy, nie však pre horizontálne konštrukcie ako sú mosty.
The calculation of the initial rotational stiffness of bridge connection is immensely important element of calculations. Generally, railway bridges are more than 60 years old. These bridges are still burdened by train traffic. The diagnostic of bridges is necessary to safety functioning. The connections are critical point. Their correct calculation is essential for the administration to determine their service life and load capacity. It is the initial rotational stiffness that allows the connections to be modelled so that they capture reality as much as possible. Unfortunately, the procedure in the Eurocode is not clear. The calculation is defined only for building, not horizontal structures such as bridges.
Keywords:
Bridge; connection; initial rotational stiffness; steel Host item entry: Juniorstav 2022 – sborník příspěvků, ISBN 978-80-86433-76-9
Institution: Brno University of Technology
(web)
Document availability information: Fulltext is available in the Brno University of Technology Digital Library. Original record: http://hdl.handle.net/11012/203442