Original title:
Přestavba objektu pro skladování
Translated title:
Reconstruction of the Building for Storage
Authors:
Heger, Petr ; Buchta, Stanislav (referee) ; Hron, Lukáš (advisor) Document type: Bachelor's theses
Year:
2015
Language:
cze Publisher:
Vysoké učení technické v Brně. Fakulta stavební Abstract:
[cze][eng]
Náplní bakalářské práce je přestavba objektu pro skladování. Úkolem je zdvojnásobit půdorysnou plochu ze stávajícího rozměru 18x18 m na plochu 36x18 m při výšce 7,5 m z původních 16 m. Požadavkem je maximální využití stávajícího materiálu při přestavbě. Objekt se nachází ve Znojmě. Původní konstrukce střechy je řešena pomocí příhradových nosníků se segmentovým zakřivením dolního pásu, délka těchto nosníků je 18 m a osová vzdálenost činí 6 m. Všechny vazníky jsou kloubově uloženy na sloupy. Pro rozšíření haly byly použity vazníky z plnostěnných válcovaných I profilů. Prostorová tuhost je zajišťována pomocí stěnových a střešních ztužidel. Pro konstrukci byl zpracován statický výpočet hlavních nosných částí konstrukce včetně spojů a vybraných detailů. Byla zpracována technická zpráva a výkresová dokumentace dle specifikace vedoucího práce. Pro návrh a posouzení konstrukce byly použity platné normy ČSN EN.
The subject of this bachelor’s thesis is to design the extension of the steel structure of the storage hall. The task is to double the platform area from 18 x 18 m up to 36x18 m with the height of 7,5 m. It is required to use as much of existing profiles as possible. The structure is located in Znojmo. The original roof structure is made of truss girders with the segmently curved lower girdle. The span of main frame is 18 m and the axial distance of main frames is 6 m. All girders are pinned. In extended structure is used the plate girder. Spatial rigidity of the structure is made by wall and roof bracing. The static calculation of main load-bearing elements including joints and specific details was made for the structure. The technical report and drawings were specified by the supervisor. For design of the structure were used valid standards ČSN EN.
Keywords:
main frame; plate girder; segment; static calculation; technical report; Truss girder; plnostěnný vazník; Příhradový vazník; příčná vazba; segment; statický výpočet; technická zpráva
Institution: Brno University of Technology
(web)
Document availability information: Fulltext is available in the Brno University of Technology Digital Library. Original record: http://hdl.handle.net/11012/42247