Original title:
Vývoj procesních parametrů pro technologii 3D tisku stereolitografii
Translated title:
Development of process parameters for the stereolithography
Authors:
Vítek, Jan ; Škaroupka, David (referee) ; Paloušek, David (advisor) Document type: Bachelor's theses
Year:
2017
Language:
cze Publisher:
Vysoké učení technické v Brně. Fakulta strojního inženýrství Abstract:
[cze][eng]
Bakalářská práce se zabývá nalezením optimálních procesních parametrů s cílem dosažení vysoké pevnosti s DLP (digital light processing) 3D tiskárnou Solflex 650 a pro materiál Detax Solflex model. V rešeršní části práce je uveden princip tisku pomocí laseru a pomocí DLP projektoru a jejich porovnání. Dále jsou uvedeny informace o materiálech a vliv procesních parametrů na tisk. Na základě poznatků byl stanoven předpoklad vývoje pevnosti v závislosti na době osvitu a tloušťce vrstvy. Vzorky byly nejprve testovány zkouškou tvrdosti se standardem Shore D a výsledky byly následně porovnány. Poté byly vytvořeny vzorky na tah s vybranými optimálními parametry určenými z předchozí zkoušky a ty byly podrobeny zkoušce tahem. Z výsledků byla stanovena závislost pevnosti na procesních parametrech.
This bachelor thesis deals with the search for optimal process parameters to reach a high strength of the Detax Solflex model material, with the DLP (digital light processing) 3D Solflex 650 printer. In the first part of this thesis the principle of printing using a laser and using a DLP projector and their comparison are presented. Further information about materials and impact of the process parameters on a printing are discussed. Based on a knowledge two assumptions were set: influence of exposure time and influence of layer thickness on strength. Firstly, samples were tested by the hardness Shore D test and the results from the test were compared. New samples for the stress test with the optimal set of parameters given by the previous test were printed and tested. Process parameters influence on strength was determined from the achieved results.
Keywords:
Additive manufacturing; DLP; exposure time; layer thickness; Stereolithography; strength; Aditivní výroba; DLP; doba osvitu; pevnost; Stereolitografie; tloušťka vrstvy; zkouška tahem
Institution: Brno University of Technology
(web)
Document availability information: Fulltext is available in the Brno University of Technology Digital Library. Original record: http://hdl.handle.net/11012/66296