Original title:
Výroba kotevního prvku
Translated title:
Manufacturing of wall clamp
Authors:
Maleček, Michal ; Císařová, Michaela (referee) ; Podaný, Kamil (advisor) Document type: Bachelor's theses
Year:
2013
Language:
cze Publisher:
Vysoké učení technické v Brně. Fakulta strojního inženýrství Abstract:
[cze][eng]
Kotevní prvek slouží k uchycení terasového prkna na hranol nosné konstrukce. Je vyráběn z ocelového plechu 11 375.20 tloušťky 2 mm s výrobní sérii 150 000 ks/rok. Z variantního řešení byla jako nejoptimálnější technologie výroby zvolena kombinace stříhání s ohýbáním ve sdruženém nástroji. Na základě technologických a konstrukčních výpočtů byl navržen nástroj se spodním přidržovačem v místě ohybu, pro které byla zpracována základní výkresová dokumentace. Z celkové tvářecí síly a práce byl pro výrobu zvolen lis LEN 40 C (výrobce TOMA INDUSTRIES s.r.o.) se jmenovitou silou 250 kN. Z ekonomického zhodnocení byly stanoveny nutné výrobní náklady jedné součásti a dle bodu zvratu se výroba stává ziskovou pro sérii větší než 89 196 ks.
A wall clamp is used for attachment of terrace board to supporting structure. The discussed part is manufactured from sheet metal 11 375.20 which is 2 mm thick. The production series will be 150,000 pieces per year. A combination of shearing and bending in the combined tool was selected from a variant solution as the most suitable technology of manufacturing. Based on technological and structural calculations, a tool was designed with lower pressure pad at the bend point. For this tool was also made fundamental drawings. In view of the total moulding force and work, LEN 40 C press with the nominal force 250 kN (manufactured by TOMA INDUSTRIES s.r.o.) was selected. Necessary manufacturing costs of one part were determined from an economic evaluation. According to a break-even point, the manufacturing becomes profitable for a series of more than 89 196 pieces.
Keywords:
11 375 steel; bending; shearing; transfer combined tool; Ocel 11 375; ohýbání; sdružený postupový nástroj; stříhání
Institution: Brno University of Technology
(web)
Document availability information: Fulltext is available in the Brno University of Technology Digital Library. Original record: http://hdl.handle.net/11012/26211