Original title:
PI detektor kovů s DSP zpracováním
Translated title:
PI Metal Detector Using DSP Processing
Authors:
Betlach, Radomír ; Čmiel, Vratislav (referee) ; Šebesta, Jiří (advisor) Document type: Bachelor's theses
Year:
2012
Language:
cze Publisher:
Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií Abstract:
[cze][eng]
Tématem práce je návrh pulzně-indukčního detektor kovu. Hledač má pracovat s využitím již známého principu detekce, avšak v inovovaném pojetí. Při návrhu má být využito nových technologií a postupů. V práci je popisován návrh celkové koncepce a dílčích částí hledače. Jsou diskutovány důvody využití jednotlivých postupů, jejich výhody, eventuelně celkový dopad zjištěných parametrů zapojení na výsledné vlastnosti detektoru. Při návrhu obvodového řešení má být uvažováno následné zpracování signálu pomocí DSP. Následně, za použití teorie, má být vytvořen funkční prototyp detektoru a ověřeny dosažené parametry.
The subject of Bachelor‘s thesis is design of pulse-induction metal detector. The detector is designed to operate with already-known principle of detection, yet at an innovative concept. In design will be used new technologies and procedures. In the thesis is described design of the general conception and components of the detector. The arguments for utilization separate procedures are discussed, as well as their advantages, eventually general impact of parameters of wiring against final properties of the detector. In design of wiring solution should be considered the following signal processing by DSP. Another subject of this thesis is to apply mentioned theory in practise and create a working sample of metal detector.
Keywords:
Metal detector; pulse induction; signal processing; Detektor kovů; pulzní indukce; zpracování signálu
Institution: Brno University of Technology
(web)
Document availability information: Fulltext is available in the Brno University of Technology Digital Library. Original record: http://hdl.handle.net/11012/10045