Original title:
Výroba kotvící patky
Translated title:
Production of anchor foot
Authors:
Janda, Petr ; Císařová, Michaela (referee) ; Lidmila, Zdeněk (advisor) Document type: Bachelor's theses
Year:
2015
Language:
cze Publisher:
Vysoké učení technické v Brně. Fakulta strojního inženýrství Abstract:
[cze][eng]
Předložená bakalářská práce se zabývá návrhem kotevní patky určené k upevnění dřevěných trámů způsobem, který zabraňuje přímému styku trámu s podložím. Je vyráběna z ohnutého plechu konstrukční oceli 1.0038 tloušťky 4 mm ve výrobní sérii 80 000ks/rok. Z jednotlivých variant výroby bylo vybráno stříhání a ohýbání v postupovém nástroji. Na základě technologických, konstrukčních a kontrolních výpočtů byly zkonstruovány nástroje, pro které byla zpracována technická dokumentace. Jako polotovar byla zvolena tabule plechu o rozměrech 4 x 1500 x 3000mm s využitím 94%. Z celkové střižné síly, která vyšla řádově větší než síla ohýbací, byl pro oba nástroje zvolen stejný lis CDCS 2500 P81, který vyrábí firma Dirinler. Ekonomickým zhodnocením byly určeny náklady na výrobu jedné kotevní patky 102,3Kč zahrnující 30 % zisk společnosti. Dle vypočteného bodu zvratu se stane výroba ziskovou po vyrobení 12 106ks.
The present bachelor thesis deals with a design of anchor foot used for fixing wooden beams in the manner that, prevents a direct contact of the beam and the subsoil. It is made of bent metal sheet of 4 mm thick steel 1.0038 in the production run of 80 000pcs/year. A combination of shearing and bending at a follow tool was selected from among various options as the most appropriate. On the basis of technological, structural and control calculations, tool were designed and the technical documentation was elaborated. A blank sheet of metal with dimensions of 4 x 1500 x 3000mm (using 94%) was chosen as a semi-finished product. On the basis of the total shearing force, which was greater that the bending force, the same press CDCS 2500 P81 made by the company Dirinler was selected for both tools. Using the economic evaluation, production costs per one anchor foot were calculated in the amount of 102,3CZK, including 30% profit of the company. According to the calculated turning point, the production becomes profitable after manufacture of 12106pcs.
Keywords:
1.0038 steel; bending; shearing; sheet metal forming; wall clamp; kotevní prvek; Ocel 1.0038; ohýbání; plošné tváření; stříhání
Institution: Brno University of Technology
(web)
Document availability information: Fulltext is available in the Brno University of Technology Digital Library. Original record: http://hdl.handle.net/11012/40465