Original title:
Svařování rotorových materiálů
Translated title:
Welding of turbine rotor materials
Authors:
Cvoligová, Hana ; Kubíček, Jaroslav (referee) ; Daněk, Ladislav (advisor) Document type: Master’s theses
Year:
2013
Language:
cze Publisher:
Vysoké učení technické v Brně. Fakulta strojního inženýrství Abstract:
[cze][eng]
V programech Visual – Weld a Sysweld byla provedena zjednodušená simulace procesu svařování rotoru turbíny z materiálu 27NiCrMoV 15-6. Numerická analýza probíhala za shodné teploty předehřevu a pokryla minimální a maximální procentuální chemické složení oceli. Provedená simulace prokázala, že vlivem % odchylek prvků v materiálu je změněna rychlost, potřebná k dosažení bainitické struktury. Výsledky simulací byly ověřeny praktickým experimentem. Na základní materiál byly navařeny metodou MIG dvě housenky, jedna při teplotě předehřevu 200 °C, druhá při 300 °C, obě se stejným specifickým vneseným teplem QS. Byla hodnocena makro a mikrostruktura základního materiálu a TOO a byl změřen průběh tvrdosti. Rozdíly se pohybovali v přijatelné odchylce 15 %.
In the Visual - Weld and Sysweld programs, a simplified simulation of the welding process of the turbine rotor made of 27NiCrMoV 15-6 substance was performed. The numerical analysis took place at the equal temperature of preheating and it covered both minimal and maximal percent chemical composition. The simulation proved that the percent deviations of elements in the substance change the speed necessary for reaching of the bainitic structure. Simulation results were verified by a practical experiment. Two weld beads were welded to a base substance by MIG method: one bead at the temperature of 200°C, the other one at the temperature of 300°C, both with the same specific input caloric QS. Both micro and macrostructure of the base substance and TOO was evaluated, and the progression of the hardness was measured as well. The deviations fell within the acceptable 15% range.
Keywords:
MIG; simulation; Steel 27NiCrMoV 15-6; Sysweld; turbine; welding; MIG; Ocel 27NiCrMoV 15-6; simulace; svařování; Sysweld; turbína
Institution: Brno University of Technology
(web)
Document availability information: Fulltext is available in the Brno University of Technology Digital Library. Original record: http://hdl.handle.net/11012/25818