Home > Academic theses (ETDs) > Master’s theses > Studium vlivu procesních parametrů na vlastnosti heterogenního svaru martenzitické korozivzdorné oceli s uhlíkovou ocelí při laserovém svařování s rozmítáním svazku
Original title:
Studium vlivu procesních parametrů na vlastnosti heterogenního svaru martenzitické korozivzdorné oceli s uhlíkovou ocelí při laserovém svařování s rozmítáním svazku
Translated title:
Study of the influence of process parameters on welding properties of ferritic stainless steel and carbon steel in laser oscillation welding
Authors:
Rýznarová, Martina ; Kubíček, Jaroslav (referee) ; Mrňa, Libor (advisor) Document type: Master’s theses
Year:
2019
Language:
cze Publisher:
Vysoké učení technické v Brně. Fakulta strojního inženýrství Abstract:
[cze][eng]
V práci je zkoumán vliv tvaru geometrie rozmítací křivky a frekvence kmitání spotu na vlastnosti heterogenního svaru martenzitické korozivzdorné oceli X12Cr13 s uhlíkovou ocelí S355MC při laserovém svařování s rozmítáním svazku. U vzorků byla provedena makroskopická kontrola, která byla zaměřená na velikost svaru a tepelně ovlivněné oblasti, svarové vady, tvar svaru a převýšení/propad lícní strany a kořene svarového spoje. Následnou mikroskopickou kontrolou byla určena jak struktura svarového kovu, tak tepelně ovlivněné oblasti a základního materiálu. Jako poslední byla vyhotovena zkouška mikrotvrdosti dle Vickerse. Na základě experimentu bylo zjištěno, že významným procesním parametrem je frekvence spotu.
In the thesis, the influence of the shape of the beam wobbling geometry and the spot vibration frequency on the properties of the heterogeneous weld of X12Cr13 martensitic stainless steel with carbon steel S355MC in laser oscillation welding is investigated. Macroscopic control was performed on the samples, which were focused on weld size and heat affected areas, weld defects, weld shape and cant / drop face and weld joint root. Subsequent microscopic inspection determined both the weld metal structure and the heat affected area and base material. The last was a Vickers microhardness test. Based on the experiment, it was found that the spot process frequency is an important process parameter.
Keywords:
beam wobbling; laser; laser welding; S355MC steel; X12Cr13 steel; laser; laserové svařování; ocel S355MC; ocel X12Cr13; rozmítání svazku
Institution: Brno University of Technology
(web)
Document availability information: Fulltext is available in the Brno University of Technology Digital Library. Original record: http://hdl.handle.net/11012/179051