Original title:
Utváření mazacího filmu u spékaných kovových dílů impregnovaných olejem
Translated title:
Lubricant film formation in oil impregnated sintered metal parts
Authors:
Látal, Roman ; Polach, Pavel (referee) ; Omasta, Milan (advisor) Document type: Master’s theses
Year:
2016
Language:
cze Publisher:
Vysoké učení technické v Brně. Fakulta strojního inženýrství Abstract:
[cze][eng]
Tato diplomová práce se zabývá experimentálním studiem utváření mazacího filmu u spékaných kovových dílů impregnovaných olejem. Tloušťka mazacího filmu v liniovém kontaktu je měřena pomocí metody optické interferometrie tenkých mazacích filmů. V této diplomové práci jsou popsány vlivy jednotlivých provozních parametrů na utváření mazacího filmu. Při využití impregnovaného maziva dochází k nedostatečnému zásobení kontaktu mazivem. Jednotlivé výsledky jsou výrazně ovlivněny mírou zaplavení kontaktní oblasti.
This thesis deals with the experimental study of the formation of the lubricating film used for sintered metal parts impregnated with oil. The thickness of the lubricating film in a line contact is measured by the method of optical interferometry of thin lubricating films. In this thesis, the effects of various operating parameters on the formation of the lubricating film are described. The usage of impregnated lubricant leads to insufficient supply of lubricant to the contact. Individual results are significantly influenced by the degree of flooding of the contact area.
Keywords:
EHL; lubrication film thickness; porous parts; Tribology; EHD mazání; porézní součásti; tloušťka mazacího filmu; Tribologie
Institution: Brno University of Technology
(web)
Document availability information: Fulltext is available in the Brno University of Technology Digital Library. Original record: http://hdl.handle.net/11012/60922