Original title:
Výroba montážní spony sdruženým nástrojem
Translated title:
Manufacturing of a mounting clip by compound tool
Authors:
Krčma, Erik ; Lidmila, Zdeněk (referee) ; Peterková, Eva (advisor) Document type: Master’s theses
Year:
2022
Language:
cze Publisher:
Vysoké učení technické v Brně. Fakulta strojního inženýrství Abstract:
[cze][eng]
Diplomová práce se zabývá návrhem technologie výroby montážní spony pro dřevěné palubky. Materiálem je žárově pozinkovaná ocel DX51D+Z140 o tloušťce 0,5 mm. Roční série 600 000 ks bude zhotovena ze svitku plechu. Navržený výrobní postup je složen z pěti kroků, zahrnuje střižné, ohýbací a lisovací operace. Pro výrobu zadané součásti byl navržen sdružený postupový nástroj. Tvářecí síla potřebná pro zhotovení součásti je 189 kN. Pro výrobu byl zvolen mechanický lis PE30H od firmy Vaptech.
The master's thesis deals with the design of the production technology for mounting clip for wooden panels. The material is hot-dip galvanized steel DX51D+Z140 with a thickness of 0,5 mm. The annual series of 600 000 pieces will be made from a coil. The proposed production process consists of five steps, which involves puncing, bending and embossing. A progressive die was designed for the production of the given part. The forming force required for stamping is 190 kN. A PE30H mechanical press from Vaptech company was chosen for the fabrication.
Keywords:
bending; lancing; mounting clip; progressive die; sheet metal forming; steel DX51D+Z140; ocel DX51D+Z140; ohýbání; plošné tváření; postupový sdružený nástroj; prostřihování; spona
Institution: Brno University of Technology
(web)
Document availability information: Fulltext is available in the Brno University of Technology Digital Library. Original record: http://hdl.handle.net/11012/207592