Original title:
Výroba dojezdové kapsy posuvné brány
Translated title:
Manufacturing of an End Stop for a Sliding Gate
Authors:
Holusek, Maxmilián ; Císařová, Michaela (referee) ; Peterková, Eva (advisor) Document type: Master’s theses
Year:
2023
Language:
cze Publisher:
Vysoké učení technické v Brně. Fakulta strojního inženýrství Abstract:
[cze][eng]
Diplomová práce se zaměřuje na technologii výroby spodní dojezdové kapsy u posuvné brány. Jako výchozí materiál byla zvolena ocel DC01 o tloušťce 3 mm a výrobní sériovost stanovena na 100 000 ks/rok. Z dostupných výrobních metod byla vybrána výroba v postupovém sdruženém nástroji kombinací technologií stříhání a ohýbání. Po navržení technologie výroby, což obsahuje volbu polotovaru a výběr výrobního postupu, byly provedeny výpočty tvářecích sil a prací. Celková síla nutná pro výrobu zadané součásti byla stanovena na 1 937,7 kN. Dále byl navržen samotný nástroj a vybrán stroj S 250 od firmy Šmeral Brno a.s. Linka značky Attl a spol. s.r.o. byla zvolena pro zavedení a krokový posuv pásu plechu nástrojem.
This masters´s thesis deals with a manufacturing of an end stop for a sliding gate. The semifinished product material is a DC01 steel with a thickness of 3 mm and the production size of the series was set at 100 000 pieces a year. From many posibilities of production alterntives, a progressive die tool was chosen. It combines the two main technologies, which in this case are cutting and bending. After a proposal for manufacturing was made, much needed calculations of forming forces and work were done. The total forming force equals 1 937,7 kN. The next step was making a design of a progressive die, plus picking a S 250 press from a company called Šmeral Brno a.s. A production line from a company called Attl a spol. s.r.o. for feeding a steel coils into the press was chosen.
Keywords:
bending; cutting; DC01; end stop; progressive die tool; DC01; dojezdová kapsa; ohyb; postupový sdružený nástroj; střih
Institution: Brno University of Technology
(web)
Document availability information: Fulltext is available in the Brno University of Technology Digital Library. Original record: http://hdl.handle.net/11012/213406