Original title:
Parní turbína - návrh potrubní trasy kondenzátu
Translated title:
Steam turbine - pipeline design
Authors:
Kotas, Jakub ; Kracík, Petr (referee) ; Fiedler, Jan (advisor) Document type: Master’s theses
Year:
2020
Language:
cze Publisher:
Vysoké učení technické v Brně. Fakulta strojního inženýrství Abstract:
[cze][eng]
Diplomová práce pojednává o návrhu, trasování a dimenzování kondenzátního potrubí. V úvodu práce je proveden předběžný výpočet bilance tepelného schématu. Následuje popis systému hlavního kondenzátu doplněný o návrh potrubní trasy a výpočet tlakových ztrát na této potrubní trase. Stěžejní částí práce je výpočet tlakových ztrát, který byl proveden dvěma postupy. Při výpočtu tlakových ztrát prvním postupem byly hodnoty součinitelů místních ztrát pro potrubní prvky čerpány z literatury Idelchik a pro jednotlivé typy armatur byly použity hodnoty dodavatelů firmy Siemens Energy. Druhý postup spočívá ve výpočtu místních součinitelů ztrát pro potrubní prvky a jednotlivé typy armatur za použití vztahů uvedených v literatuře CRANE. Následně jsou tyto postupy určování místních součinitelů ztrát mezi sebou porovnány a vyhodnoceny. Práce je zakončena návrhem vhodného kondenzátního čerpadla pro tuto kondenzátní trasu na základě vypočtených hodnot v průběhu práce.
The master thesis deals with the design, tracing and dimensioning of condensate pipeline. In the beginning, a preliminary calculation of heat balance is done. It is followed by a description of the main condensate system supplemented by the computational design of pipeline and the calculation of pressure losses in this pipeline. The crucial part of the thesis is the calculation of pressure losses, which is done in two ways. The first approach to calculation of pressure losses in the pipeline is calculated using values of representative resistance coefficient for pipe ele-ments using Idelchik literature and for individual types of valves using values from datasheets of Siemens Energy suppliers. In the second approach to calculation representative resistance coefficients for pipe elements and individual types of valves CRANE literature are used. Then both approaches of choosing representative resistance coefficients are compared and evaluated. Based on the calculated values, a suitable pump is selected at the end of the master thesis.
Keywords:
condensate; condensate pump; friction factor; Heat balance schema; pipeline; pressure loss; representative resistance coefficient; steam condenser; kondenzát; kondenzátní čerpadlo; parní kondenzátor; potrubní trasa; součinitel místní ztráty; Tepelné schéma; tlaková ztráta; třecí faktor
Institution: Brno University of Technology
(web)
Document availability information: Fulltext is available in the Brno University of Technology Digital Library. Original record: http://hdl.handle.net/11012/192764