Original title:
Měření posunů a přetvoření střešní konstrukce
Translated title:
Deformation Measurement of Roof Structure
Authors:
Hubáček, David ; Švábenský, Otakar (referee) ; Bureš, Jiří (advisor) Document type: Master’s theses
Year:
2020
Language:
cze Publisher:
Vysoké učení technické v Brně. Fakulta stavební Abstract:
[cze][eng]
Diplomová práce se zabývá vyhodnocením posunů a přetvoření dřevěné střešní konstrukce velkého rozpětí bazénové haly aquaparku v Brně – Kohoutovicích. Cílem práce je porovnání a ověření využitelnosti metody laserového skenování pro vyhodnocování posunů a přetvoření. Porovnání bylo provedeno vůči polární metodě s veličinami měřenými totální stanicí. V rámci práce byla vykonána dvě etapová měření, na základě kterých bylo provedeno porovnání obou metod. Data získána polární metodou byla zpracována pomocí MNČ, data z laserového skenování byla zpracována v tabulkovém procesoru Excel. Z porovnání obou metod vyplývá, že metodou laserového skenování dosahujeme srovnatelné přesnosti jako při určení polární metodou. Je tedy možné využít metodu laserového skenování pro měření posunů a přetvoření.
The thesis deals with the evaluation of displacements and deformation of the large span wooden roof structure of the aquapark hall in Brno - Kohoutovice. The task of this work is to compare and verify the applicability of the laser scanning method for the evaluation of displacements and deformation. The comparison was performed with regard to the polar method with quantities measured by the total station. As part of the work, two-stage measurements were performed on the basis of which a comparison of both methods was performed. The data obtained by the polar method were processed using LSM, the data from laser scanning were processed in an Excel spreadsheet. A comparison of the two methods shows that we have achieved a similar level of accuracy with the laser scanning method when compared to the polar method. It is therefore possible to use the laser scanning method to measure displacements and deformation.
Keywords:
laser scanning method; LSM; measurement of displacements and deformations; polar method; wooden roof structure; dřevěná střešní konstrukce; metoda laserového skenování; MNČ; měření posunů a přetvoření; polární metoda
Institution: Brno University of Technology
(web)
Document availability information: Fulltext is available in the Brno University of Technology Digital Library. Original record: http://hdl.handle.net/11012/191178