Original title:
Vzájemná ovlivňování WLAN sítí
Translated title:
Interactions between WLAN networks
Authors:
Doleželová, Eva ; Zeman, Kryštof (referee) ; Škorpil, Vladislav (advisor) Document type: Bachelor's theses
Year:
2020
Language:
cze Publisher:
Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií Abstract:
[cze][eng]
Tato práce se zabývá vzájemným ovlivňováním WLAN sítí. Vysvětluje historii a následný vývoj bezdrátových technologií a poté se zaměřuje na současné WLAN sítě. Popisuje problematiku rušení ve WLAN sítích a parametry, které nedílnou součástí přispívají k vzájemnému rušení. Součástí práce je vypracování dvou laboratorních úloh. První úloha je realizována v programu Riverbed, ve kterém je sestavena topologie se třemi stejnými WLAN routery. Po otestování WLAN routerů je zobrazen graf popisující rušení v pásmu 2,4 GHz, kterého je dosaženo vhodným zvolením frekvenčního pásma, vysílacího výkonu a kanálu. Druhá laboratorní úloha je realizována v programu Iperf3, který je nainstalovaný na třech Raspberry Pi (RPi Zero, RPi 3 a RPi 4). Zahlcení sítě je docíleno pomocí skriptu wifijammer, který je nainstalován na RPi 4. V této druhé laboratorní úloze byly nejdříve ověřeny parametry přenosu a pomocí skriptu wifijammer byla odmítnuta služba. Pro testování druhé laboratorní úlohy byly zvoleny standardy IEEE 802.11b a IEEE 802.11n s ve frekvenčním pásmu 2,4 GHz. Testování probíhalo na routrech Mercusys, Netis, Tp-Link a Asus. Výsledky z testovacích scénářů byly přehledně zpracovány formou grafů.
This bachelor thesis deals with the possible interferences caused by the parallel running WLAN networks. It explains the history and subsequent development of wireless technologies and then focuses on current WLAN networks. It describes the problem of interference in WLAN networks and parameters that contribute to mutual interference. Practical part of this thesis consists of two laboratory exercises. The first task is implemented in the Riverbed program, in which a topology with three identical WLAN routers is assembled. After testing the WLAN routers, a graph describing the interference in the 2.4 GHz band is displayed, which is achieved by a suitable choice of frequency band, transmission power and channel. The second laboratory task is implemented utilizing the Iperf3 program, which is installed on three Raspberry Pi´s (RPi Zero, RPi 3, and RPi 4). Network congestion is achieved using the wifijammer script, which is installed on RPi 4. In this second laboratory task, the transmission parameters were first verified and the service was denied using the wifijammer script. For evaluation of the second laboratory task, the IEEE 802.11b and IEEE 802.11n utilizing the frequency band 2,4 GHz were chosen. For testing, the following routers were used: Mercusys, Netis, Tp-Link and Asus routers. Once the measurements were over, all the data was processed and included as charts.
Keywords:
Iperf3; Raspberry Pi; Wi-Fi; Wifijammer; WLAN; Iperf3; Raspberry Pi; Wi-Fi; Wifijammer; WLAN
Institution: Brno University of Technology
(web)
Document availability information: Fulltext is available in the Brno University of Technology Digital Library. Original record: http://hdl.handle.net/11012/190279