Home > Academic theses (ETDs) > Master’s theses > Vliv ochranné atmosféry na vlastnosti svaru při kondukčním laserovém svařování plechů z konstrukční uhlíkové oceli
Original title:
Vliv ochranné atmosféry na vlastnosti svaru při kondukčním laserovém svařování plechů z konstrukční uhlíkové oceli
Translated title:
Influence of shielding gas on weld properties of conductive laser welding of sheet from carbon steel
Authors:
Kotrík, Marcel ; Sigmund, Marian (referee) ; Mrňa, Libor (advisor) Document type: Master’s theses
Year:
2019
Language:
slo Publisher:
Vysoké učení technické v Brně. Fakulta strojního inženýrství Abstract:
[slo][eng]
V diplomovej práci sú analyzované na základe literárnej štúdie vplyvy troch ochranných atmosfér. Porovnával sa vplyv ochrannej atmosféry tvorenou čistým Ar, zmesou Ar s 3obj.%CO2 a zmesou Ar s 18obj.%CO2 na mechanické vlastnosti kondukčne laserom zváraných tupých spojov plechov z konštrukčných oceli DC01 a S235JR o hrúbke 3mm a 2mm. Porovnávali sa pevnostné vlastnosti zvarov v ťahu, tvrdosť zvarov a tepelne ovplyvnenej oblasti pri nízkom zaťažení. Ďalej sa sledovalo a porovnávalo prúdenie plynov počas zvarového procesu šlírovou metódou a jeho účinky na vzhľad skúšobných zvarov. Na metalografických výbrusoch zvarov sa vyhodnocovali chyby a rozmery spojov.
In the thesis are analysed influences of three shield gases, based on literary pursuit. Compared was influence of the gas consisting of pure Ar, mixture Ar with 3vol.% CO2 and the mixture Ar with 18vol.% CO2 on mechanical properties of conduction laser welded blunt welds made from structural steel DC01 and S235JR with thickness 3mm and 2mm. Compared were strength properties of the welds in tension, weld hardness and hardness of the heat affected area under the low stress. Further was observed and compared stream of the gases during welding process and its influences on the appearance of the trial welds. On the metallographical cuts of the welds were evaluated mistakes and dimensions of the welds.
Keywords:
conduction mode; laser welding; schlieren method; shielding gas; Vickers hardness
Institution: Brno University of Technology
(web)
Document availability information: Fulltext is available in the Brno University of Technology Digital Library. Original record: http://hdl.handle.net/11012/179010