Original title:
Využití dvouparametrové lomové mechaniky u ozubení s tenkým věncem
Translated title:
Utilization of two-parameter fracture mechanics in gears with thin rim Document type: Papers Conference/Event: Víceúrovňový design pokrokových materiálů /4./, Brno (CZ), 2008-12-04 / 2008-12-05
Year:
2008
Language:
cze Abstract:
[cze][eng] Cílem práce je stanovení trajektorie únavové trhliny u ozubení s tenkým věncem pomocí MKP. Byly využity principy jednoparametrové a dvouparametrové lineárně elastické lomové mechaniky k zjištění typu porušení ozubeného kola. Byla určena minimální tloušťka věnce při které se trhlina ještě šíří pod zubem. Numerické simulace byly porovnány s experimentálními daty nalezenými v literatuře. Bylo zjištěno, že zahrnutí vlivu constraintu zpřesňuje predikci směru šíření únavové trhliny a v jistých případech vede k výrazně odlišným výsledkům predikovaných pomocí jednoparametrové lineárně elastické lomové mechaniky.The aim of this work was to use FEM to estimate trajectory of the fatigue crack in gears with thin rim. The principles of the classical linear-elastic fracture mechanics and the two-parameter fracture mechanics were used to describe the process of gear failure. The minimum thickness of the gear rim (in which the failure mechanism is a fracture below the gear tooth) was numerically calculated. Numerical results were validated by comparison with experimental results obtained from available literature. It was found that involving of constraint give precise calculation of the consequent direction of the fracture angle and in some cases the constraint can cause significant change in prediction of fracture trajectory find out by classical linear-elastic fracture mechanics characterization.
Keywords:
crack; gear; T-stress; thin rim; two-parameter fracture mechanics Project no.: CEZ:AV0Z20410507 (CEP), GA101/08/1623 (CEP), GD106/05/H008 (CEP), 1QS200410502 (CEP) Funding provider: GA ČR, GA ČR, GA AV ČR Host item entry: Víceúrovňový design pokrokových materiálů - 2008. Sborník doktorské konference, ISBN 978-80-254-3492-5
Institution: Institute of Physics of Materials AS ČR
(web)
Document availability information: Fulltext is available at the institute of the Academy of Sciences. Original record: http://hdl.handle.net/11104/0167281