Original title:
Výroba součásti přesným stříháním
Translated title:
Manufacturing of Component by Fineblanking Technology
Authors:
Čeryová, Lenka ; Císařová, Michaela (referee) ; Peterková, Eva (advisor) Document type: Bachelor's theses
Year:
2017
Language:
cze Publisher:
Vysoké učení technické v Brně. Fakulta strojního inženýrství Abstract:
[cze][eng]
Bakalářská práce je zaměřena na návrh technologie výroby spojovací lamely automatické převodovky DSG. Před výběrem nejvhodnější technologie pro výrobu spojovací lamely bylo provedeno hodnocení jednotlivých dostupných technologií, z nichž byla vybrána jako nejvhodnější metoda přesného stříhání s tlačnou hranou. Spojovací lamela bude vyráběna z plechu o tloušťce 1,5 mm, ocel 12 040, který bude dodáván ve svitcích. Dle technologických výpočtů vyplynulo, že spojovací lamela bude vyráběna na jednu operaci. Stroj pro výrobu byl zvolen HFA 3200 plus o maximální síle 3200 kN. Hlavním cílem práce je navržení střižného nástroje, vytvoření výkresové dokumentace a technicko-ekonomické zhodnocení.
This bachelor thesis is focused on the design of production technology of the friction plate for the automatic gearbox DSG. Before selecting the most suitable technology for the production of friction plates the evaluation of different available technologies was carried out, of which as the most appropriate method, the accurate cutting with pressing edge was selected. The friction plate will be manufactured from metal sheet with the thickness of 1.5 mm, steel 12040, which will be supplied in coiled sheets. From the technological calculations followed that the friction plate will be produced in a one manufacturing operation. For serial production the machine HFA 3200 plus with the maximum force of 3200 kN was chosen. The main objective of the bachelor thesis is designing of cutting tools, creation of drawing documentation and technical - economic evaluation.
Keywords:
connecting plate; hydraulic press HFA; precision cutting; Steel 12040; hydraulický lis HFA; Ocel 12 040; přesné stříhání; spojovací lamela
Institution: Brno University of Technology
(web)
Document availability information: Fulltext is available in the Brno University of Technology Digital Library. Original record: http://hdl.handle.net/11012/65521