Original title:
Výroba řetězového kolečka pro motocykl
Translated title:
Manufacturing of chain wheel for motorcycle
Authors:
Šarocký, Robert ; Peterková, Eva (referee) ; Řiháček, Jan (advisor) Document type: Bachelor's theses
Year:
2016
Language:
cze Publisher:
Vysoké učení technické v Brně. Fakulta strojního inženýrství Abstract:
[cze][eng]
Práce se věnuje návrhu vhodné technologie výroby součásti řetězového kolečka, které je součástí hnací soustavy motocyklu. Výrobní série činí 200 000 kusů za rok. Byla provedena analýza různých způsobů výroby, ze které vyplynula optimální výrobní technologie, a to přesné stříhání s tlačnou hranou. Jako polotovar výrobku byla zvolena tabule plechu (8 x 1000 x 2000) mm z oceli 14220.3. Byl stanoven návrh střižného nástroje s výkresovou dokumentací vybraných dílů nástroje. Na základě vypočtení potřebných sil pro střih byl dále zvolen výrobní stroj, trojčinný hydraulický lis Feintool HFA 8800 plus. V konečné fázi práce bylo vyhotoveno technicko-ekonomické posouzení účinnosti výroby.
The aim of this thesis was to propose a suitable technology for the construction process of a chain wheel, which is one of the parts of the drivetrain of a motorcycle. The production series was 200 000 pieces per year. An analysis of several different construction processes was carried out and the process chosen as the most suitable was exact cutting with compression edge. The material of the product was a metal plate (8 x 1000 x 2000) mm 14 220.3, with the width 8 mm.Furthermore, a proposal of a cutting tool was conducted with drawn documentation. Based on the calculation of the required powers the manufacturing machine was chosen, more particularly the three way hydraulic press Feintool HFA 8800 plus. In the final phase, an assessment focused on the effectiveness of the production process was carried out with focus on both the technical and the economic standpoint.
Keywords:
chain wheel; cutting tool; fine blanking; material 14 220.3; Sheet metal forming; technology of manufacturing; materiál 14 220.3; Plošné tváření; přesné stříhání; střižný nástroj; technologie výroby; řetězové kolečko
Institution: Brno University of Technology
(web)
Document availability information: Fulltext is available in the Brno University of Technology Digital Library. Original record: http://hdl.handle.net/11012/60536