Original title:
Snížení nákladů na výrobu odlitků ze slitin hliníku
Translated title:
Costs reduction in production of Al-alloy castings
Authors:
Nováková, Lucie ; Lána, Ivo (referee) ; Roučka, Jaromír (advisor) Document type: Master’s theses
Year:
2010
Language:
cze Publisher:
Vysoké učení technické v Brně. Fakulta strojního inženýrství Abstract:
[cze][eng]
Tato diplomová práce se zabývá řešením nejzávažnějších vnitřních vad odlitků ze slitin hliníku litých do pískových forem ve společnosti Slévárna a modelárna Nové Ransko, s.r.o. Řešení problematiky obsahuje popis problémových odlitků s šetřením struktury a fází a následný detailní rozbor jejich výroby. V práci je zkoumán vliv Fe a Mn na možný vznik vnitřní porezity provedením zkušebních taveb se zhodnocením změny vnitřní struktury. Řešením je přísnější kontrola chemického složení taveniny s ohledem na poměr Mn/Fe přítomných ve slitině, nákup odplyňovacího zařízení ke snížení naplynění taveniny a také zdokonalení kontroly naplynění taveniny nákupem vhodného zařízení pro stanovení indexu hustoty.
This thesis deals with solving the most serious internal defects in castings made of aluminum alloys which are cast in sand molds in Slévárna a modelárna Nové Ransko Ltd. The problem solving contains a description of the problematic castings with the investigation of the structure and phases and subsequent detailed analysis of their production. The Author of this thesis also examines the influence of Fe and Mn on a possible formation of the internal porosity with the help of test meltings with the evaluation of the internal structural change. The Author’s design solution is a close checking of chemical composition with regard to the ratio Mn / Fe present in the alloy, the purchase of Foundry Degassing Unit to reduce gassiness of melted metals and better control of gassiness with the help of the appropriate equipment for the density Dichte index.
Keywords:
3; Al - alloys; AlSi10Mg; AlSi7Mg0; Dichte index; FDU; internal defect; metal structure; metallography; Mn)3Si2).; phase ? (Al15(Fe; phase ß(Al5FeSi); sand casting; sand mould; shrinkage porosity; 3; ? (Al15(Fe; AlSi10Mg; AlSi7Mg0; Dichte index; FDU; lití do písku; metalografie; Mn)3Si2) fáze.; porezita; písková forma; Slitiny hliníku; struktura kovu; vnitřní vady; ß (Al5FeSi) fáze
Institution: Brno University of Technology
(web)
Document availability information: Fulltext is available in the Brno University of Technology Digital Library. Original record: http://hdl.handle.net/11012/2638