Original title:
Pore-Size Distribution from Liquid Expulsion Permporometry
Translated title:
Distribuce porů z permporometrických měření
Authors:
Šolcová, Olga ; Schneider, Petr Document type: Papers Conference/Event: International Congress of Chemical and Process Engineering CHISA 2004 /16./, Praha (CZ), 2004-08-22 / 2004-08-26
Year:
2004
Language:
eng Abstract:
[eng][cze] Two measurement modes for obtaining wet-curves were suggested and verified. In the figure the obtained wet and dry curves for two catalysts are shown. It was verified that LEPP gives consistent pore size distribution of flow-through pores and, thus, should be tried as the standard texture characteristic suitable for prediction and/or simulation of gas flow in porous mediaBylo ověřeno, že z LEPP permporometrie je možno získat konzistentní distribuční křivky poloměrů "" průtočných"pórů - pórů otevřených na obě strany. Tuto metodu by bylo možné použít jako standardní texturní charakteristiku vhoudnou pro předpověď či simulaci toku plynů v porézním médiu
Keywords:
mass transfer; nanostructure; pore size distribution Project no.: CEZ:AV0Z4072921 (CEP), GA104/04/0963 (CEP), IAA4072404 (CEP) Funding provider: GA ČR, GA AV ČR Host item entry: Summaries 2, ISBN 80-86059-40-5
Institution: Institute of Chemical Process Fundamentals AS ČR
(web)
Document availability information: Fulltext is available at the institute of the Academy of Sciences. Original record: http://hdl.handle.net/11104/0012164