National Repository of Grey Literature 15 records found  1 - 10next  jump to record: Search took 0.00 seconds. 
Diagnostics of rotating electric machines
Soukup, Patrik ; Mach, Martin (referee) ; Janda, Marcel (advisor)
The thesis Diagnostics of rotating electric machines deals with the theory of diagnostics of rotating machines, focusing especially on the diagnosis of asynchronous motors of high power. Due to the importance of maintaining the trouble-free condition of these machines with regard to serviceability, the importance of their diagnosis is growing. Due to inappropriate working conditions or for many other reasons, different types of malfunctions may occur in the machine. The list and the way of occurrence of possible failures are included and explained in this thesis. With the growing age of the machine, it is important to check the insulation status through insulation testing. These tests are performed in the practical part of the thesis and the results are presented. In the case of asynchronous machines, each anomaly leaves a signature in the form of an electrical, magnetic or vibrational signal. These signals are analyzed and evaluated using a specific measuring equipment with the intention of deciding on the current state of the machine. Motor current signature analysis (MCSA) is considered to be the main diagnostic method of asynchronous machines in this thesis. This method is described in detail in this paper and is being applied in electrical engineering.
Constrained Modeling of Induction Motor Using Physical Modeling and FEM
Trávníček, Tomáš ; Huzlík, Rostislav (referee) ; Vlach, Radek (advisor)
Tato práce řeší návrh komplexního modelu asynchronního stroje, pomocí něhož se dá stroj analyzovat. Model se skládá z dílčích modelů, které popisují asynchronní stroj z hlediska elektro-magnetického, elektrického a tepelného. Elektromagnetický model je řešen pomocí metody koneč-ných prvků v programu zvaném FEMM. Další výpočty jsou provedeny pomocí Matlabu. Tepelný model počítá s ustáleným stavem stroje v požadovaném pracovním bodě. Elektrický model je řešen pomocí náhradního schématu, ze kterého jsou odvozeny vztahy pro elektrické veličiny. Výsledný propojený model je naprogramován v Matlabu a slouží jako nástroj pro analyzování asynchronního stroje.
Calculation of induction machine cooling
Záruba, Jan ; Huzlík, Rostislav (referee) ; Janda, Marcel (advisor)
This thesis discusses in the first part of the theoretical concept of flow and cooling induction machine. His behavior , characteristics and possible variants of its calculation . Questions concerning losses from the engine, through the second cooling flow types and finally the calculation. The second part focuses on practical laboratory measurements on a real model. Furthermore, the evaluation of its results. The third part focuses on computer simulation and calculation. The third part is further divided into three phases , where in the first phase devoted to the calculation and simulation flow to the fan motor. In the second stage, the third part deals with the flow in the engine itself , and the third is described and simulated temperature analysis . In the final third phase are subsequently evaluated by computer simulations and compared with practical measurements . This comparison is based on the theory described from the beginning.
Noise suppression of six pole induction machine
Lexa, Jakub ; Janda, Marcel (referee) ; Ondrůšek, Čestmír (advisor)
This thesis deals with noise of electromagnetic origin of six pole three-phases induction machine. Task thesis was rendering literature review. Analysis of the problem consists of various analytical calculations using Matlab and subsequent comparison of results with measured data on real induction machine. The last part of thesis is a summary of conditions for induction machine with low noise.
Analysis of damage to the rotor bars of induction machines
Henzel, Roman ; Michailidis, Petr (referee) ; Skalka, Miroslav (advisor)
This bachelor thesis deals with disorders of induction machines with focus on the failure or damage to the rotor bars or end rings. The work includes a literature research of the low resistance measurement, which can be used to determine the rotor bar resistance of the squirrel cage induction machine. The experimental measurement of the analyzed motor with the following conditions (short-circuit, no-load and load) is also includes. The magnetic model of the machine was described and created in MAXWELL and results were compared with the LabVIEW software (in order to verify the accuracy of the particular simulation). Analysis results evaluation of three phase squirrel cage induction machine with broken rotor bars was done.
Analysis of the electromagnetic field in the induction machine
Adamec, Josef ; Skalka, Miroslav (referee) ; Michailidis, Petr (advisor)
Bachelor's project deals with the kinds of numerical analysis of electromagnetic fields in induction motor with squirrel cage. The main method used is the method of finite elements. The aim of the bachelor project is to analyze induction motor with squirrel cage in the Ansoft Maxwell.
Electromagnetic field calculation of Induction machine for different mechanical load
Hetflajš, Martin ; Kurfürst, Jiří (referee) ; Skalka, Miroslav (advisor)
This bachelor’s thesis deals with an analysis of the induction machine electromagnetic field distribution with real parameters. Whole analysis was done for three point of the mechanical load by finite element method in ANSYS. In the next part is described a basic theoretically research of the electromagnetic field and also preliminary survey of the numeric method for FEM. This thesis also contains an analysis of electromagnetic model of analyzed induction machine with detailed description of each analysis step and in conclusion the results summary was done.
Mechanical Torque Analysis of Induction Machine Based on Magnetic Circuit Saturation
Skalka, Miroslav ; Bendl,, Jiří (referee) ; Voženílek, Petr (referee) ; Ondrůšek, Čestmír (advisor)
e main goal of this thesis is mechanical torque analysis of induction machine based on magnetic circuit saturation, oversaturated areas classification and the possibility of oversaturated areas reduction of their influence on machine properties. Whole problem is solved by finite element method in ANSYS program. Work is divided into the description and creating of electromagnetic model, a method of the induction machine equivalent circuit parameters determination, the electromagnetic field calculation by finite element method, experimental measurement using LabVIEW program with measurement accessories (PCIe card National Instruments), data processing program in DIAdem, results analysis of calculations in terms of magnetic circuit saturation, the influence of magnetic circuit material based on electromagnetic field distribution and the magnetic flux density along the air gap including spectral analysis using MATLAB and the electromagnetic torque and its parasitic torque components calculation.
Heat measurement of electric machine
Trnka, Zbyněk ; Vítek, Ondřej (referee) ; Janda, Marcel (advisor)
The aim of this bachelor´s thesis was to familiarize with various methods of measurement of the temperature of electrical machines with cooling. The introduction of this work is dedicated to basic terms and definitions from spheres of advection, circulation, losses and heat removal from electric machine. The attention is especially devoted to contact measurement by means of thermocouples and next the measurement of temperature without contact. Finally, the work goes into analysis of losses, heat removal and measurement of the temperature of asynchronous machine.
Simulation models of electromagnetic fields in electric machine
Michailidis, Petr ; Skalka, Miroslav (referee) ; Janda, Marcel (advisor)
This project is dealing with simulation´s posibilities of elektromagnetic fields in elektric machines. A finite element method is the final element technique. The content of this project is a model creation and elektromagnetic simulation of asynchronous machine.

National Repository of Grey Literature : 15 records found   1 - 10next  jump to record:
Interested in being notified about new results for this query?
Subscribe to the RSS feed.