National Repository of Grey Literature 71 records found  1 - 10nextend  jump to record: Search took 0.01 seconds. 
Structural mapping of exploration boreholes walls within first phase - Safety boreholes for Boxcut
Waclawik, Petr ; Souček, Kamil ; Vavro, Martin ; Kukutsch, Radovan ; Ram, S.
Structural-geological analysis, i.e. core fracturing assessment within the boxcut safety\nborehole was carried out on the basis of optical televiewer record evaluation. In general,\noptical televiewer (OPTV) probe provides a continuous, unwrapped, high-resolution digital\n360° image of the borehole-walls oriented towards the cardinal points. This technique\nprovides information about the strike, dip direction, dip angle and depth of foliation, bedding\nplanes and fractures, as well as the frequency, aperture and infillings of fractures. Information\nabout spatial characteristics of structural elements is one of its indisputable advantages and\nallows for subsequent statistical evaluations.\nThe structural mapping of boreholes of Boxcut safety boreholes were carried out within the\ncontract of IG CAS (Contract No. D/18/156/00) GEOMET, s.r.o. (as a customer, contract No.\n01/2018). The aim of the contractual research was the realisation and interpretation of the\nfractures by digital logging of boreholes walls.
Obtaining data from the deep horizons of the Rožná Mine
Bukovská, Z. ; Bohdálek, P. ; Buda, J. ; Dobeš, P. ; Filipský, D. ; Franěk, J. ; Havlová, V. ; Chabr, T. ; Knés, I. ; Kryl, J. ; Kříbek, B. ; Laufek, F. ; Leichmann, J. ; Navrátil, P. ; Pořádek, P. ; Rosendorf, T. ; Soejono, I. ; Sosna, K. ; Souček, Kamil ; Šustková, E. ; Švagera, O. ; Vavro, Leona ; Vavro, Martin ; Veselovský, F. ; Waclawik, Petr ; Zuna, M.
This report summarizes the work and partial results made under the Public Procurement Obtaining Data from the deep horizons of the Rožná Mine in the first phase of the third and fourth subdivisions from February to November 2018. These are in particular technical works (boreholes, access to corridors),seismic measurements, sampling for laboratory analysis (physical-mechanical properties of rocks, breakage fills, bearing revalidation), structural characterization of the rockanalytical work on all samples taken. Parallel to these works3D models are being prepared, especially data preparation for modeling.
X-ray computed tomography analysis of four test specimens of concrete before and after the frost-resistance test
Souček, Kamil ; Georgiovská, Lucie ; Zajícová, Vendula
The non-destructive 3D X-ray computed tomography method was used to visualize the structure and baseline analysis of changes in the internal construction of two samples of concrete, four test bodies subjected to the frost resistance test. The analyzed samples were scanned on the Nikon Metrology XT H 450 2D / 3T CT Scanner. CT imaging was performed using CT Pro 3D software. The visualization, the preparation of tomographic sections, the analysis of the pore space and the measurement of the dimensions of the test of the bodies were elaborated in VGStudio MAX 2.2 software.
Authentication of real rock mass field voltage to increase safety in anomalous stress states
Koníček, Petr ; Staš, Lubomír ; Ptáček, Jiří ; Kaláb, Tomáš ; Chura, Jan ; Souček, Kamil ; Waclawik, Petr
Voltage fields are one of the key factors that, decisively, along with the mechanical and remodeling properties of rocks, greatly influence the behavior of the mountain massif. Knowledge of stress fields is beneficial for the design and successful implementation of geotechnical underground projects (eg for the assessment of the stability of underground spaces, the behavior of proposed reinforcements of underground structures, for space-time placement of underground structures) especially in non-trivial geomechanical conditions, both in terms of natural factors affecting stress fields structural and geological structure of the rock mass, tectonic stress, cracks and discontinuity in the rock mass) as well as anthropogenic factors (geomechanical configuration of the underground spaces and dynamics of their changes). Geotechnical practice in our (Czech) conditions is usually used only calculations of a voltage field based primarily on the theoretical behavior of the rocks and the assumed vertical geostatic pressure at a given depth. The development of possible progressive deformations of the stress field is then derived from the development of anthropogenic interventions into a relatively homogeneous massif. In fact, tension is also affected by close geological structures. The data obtained from the study of the magnitude, direction and change of stress in the mountain massif are a significant contribution in mathematical modeling where they can be used as input parameters to obtain a more accurate picture of the behavior of mountain massifs and underground structures in the subject areas.
Obtaining data from the deep horizons of the Rožná mine - realization project of work
Švagera, O. ; Bukovská, Z. ; Souček, Kamil ; Vavro, Martin ; Waclawik, Petr ; Sosna, K. ; Havlová, V. ; Zuna, M. ; Jankovský, F. ; Filipský, D. ; Chabr, T. ; Navrátil, P. ; Mixa, P. ; Soejono, I. ; Laufek, F. ; Kříbek, B. ; Leichmann, J. ; Zeman, J.
Realization project summarizes the planned work, its progress and continuity within the environment of Rožná I mine in the extent of the procurement „Získání dat z hlubokých horizontů dolu Rožná“ which is being compiled by Hluboké hluboké horizonty Rožná group. The final goal is to clarify the significance and spatial influence of major tectonic fault on surrounding rock mass. The results will help to clarify localization and safety issues of the potential deep underground repository, especially with respect to the Kraví hora locality.
Final research report to the project PB-2014-ZL-U2301-004-BUKOV
Souček, Kamil ; Vavro, Martin ; Staš, Lubomír ; Kaláb, Zdeněk ; Koníček, Petr ; Georgiovská, Lucie ; Kaláb, Tomáš ; Konečný, Pavel ; Kolcun, Alexej ; Králová, Lucie ; Kubina, Lukáš ; Lednická, Markéta ; Malík, Josef ; Martinec, Petr ; Ptáček, Jiří ; Vavro, Leona ; Waclawik, Petr ; Zajícová, Vendula
Bukov Underground Research Facility (Bukov URF) has been built as a test site to assess the properties and behaviour of the rock mass analogous to selected candidate sites. It is situated at a depth corresponding to the proposed storage depth of the final locality for the Czech Republic´s deep repository of high-level radioactive waste. Bukov URF is located in the Vysočina Region, the cadastral district of Bukov, approx. 3 km south-eastwards from the municipality of Dolní Rožínka. The underground research facility is placed approx. 300 m from the Bukov-1 shaft, namely on the level 12 of the shaft, at the depth of about 550 – 600 meters below the Earth’s surface. As for the regional geology, Bukov URF is found at the southern part of the Rožná uranium deposit, at the north-eastern edge of the Strážek Moldanubicum close to its contact with the Svratka Unit. The rock mass is composed of a relatively monotonous sequence of differently migmatized biotite gneisses to stromatic migmatites, continuing with amphibole-biotite to biotite-amphibole gneisses and amphiboles, with occasional fine intercalations of aplites, pegmatites or calc-silicate rocks (erlanes). Between 2013 and 2017 and within the complex geotechnical characterization of the Bukov URF, the Institute of Geonics of the Czech Academy of Sciences (Ústav geoniky AV ČR, v.v.i.) in Ostrava carried out a series of laboratory and field works in order to provide a detailed description of the geotechnical and geomechanical properties and quality of the rock mass. The works included the determination and assessment of the physical-mechanical properties of the rocks sampled from the walls, boreholes and ground surface in the locality, the determination of stress state and deformation properties of the rock mass using the methods of hydrofracturing of borehole walls, Goodman Jack and CCBO, or CCBM, determination of the rock mass quality based on selected index geomechanical properties, periodic, long-term strain-gauge measurements and convergence measurements, and the assessment of the effect of technical and mine-induced seismicity on the rock mass of interest. The implemented set of research works was supposed to render a sufficient and integral whole of geotechnical and geomechanical knowledge vital for the subsequent implementation of extensive research experiments focused on long-term safety and technical feasibility of the future national deep repository of radioactive waste.
Velocity measurements on continuous micro water jet using fluorescent PMMA seeding particles
Zeleňák, Michal ; Ščučka, Jiří ; Souček, Kamil
The paper deals with application of optical diagnostic techniques for velocity\nmeasurements of continuous micro water jet. The combination of Particle image\nvelocimetry, Particle tracking velocimetry, Laser induced fluorescence and\nShadowgraphy methods have been applied together with the use of fluorescent\nPMMA seeding particles. An experimental closed water circuit was designed with\na low-pressure water pump, and a series of experiments was conducted to\nmeasure the velocity of seeding particles in the water jet flow below the diamond\nmicro-nozzle outlet. The basic principles of the methods used in experiments are\nalso described.
Fulltext: Download fulltextPDF
Visualization of the internal structure of concrete based on brick recyclate using X-ray computed tomography
Souček, Kamil ; Georgiovská, Lucie
Pro účely vizualizace struktury vnitřní stavby betonu na bázi cihlového betonu byla použita nedestruktivní metoda 3D rentgenové počítačové tomografie. Analyzované vzorky byly systémovány na RTG počítačovém tomografu XT H 450 2D/3T firmy Nikon Metrology. Zpracování radiografických projekcí do CT objemu bylo provedeno pomocí softwaru CT pro 3D. Vlastní vizualizace, příprava tomografických řezů a analýza pórového prostoru byla zpracována v softwaru VGStudio MAX 2.2.
Cutting experiments with ASJ at 1500 bar
Zeleňák, Michal ; Foldyna, Josef ; Souček, Kamil ; Klichová, Dagmar
The aim of experimental work was to determine cutting condition maximal, middle and fine traverse speeds for selected materials and thicknesses. Materials were cut at pressure 1500 bars and 10% of suspension concentration. Secondary objective is long-term monitoring of nozzles wear using X – Ray CT tomography.
Underground research site Bukov - geotechnical characterization of the site
Souček, Kamil ; Vavro, Martin ; Vavro, Leona ; Staš, Lubomír ; Georgiovská, Lucie
Podzemní výzkumné pracoviště Bukov (PVP) je navrženo jako testovací lokalita pro zhodnocení vlastností a chování horninového masivu, typově blízkého vybraným kandidátním lokalitám, v hloubce odpovídající předpokládané úložné hloubce finálního hlubinného úložiště vysoce aktivních odpadů v České republice. PVP Bukov, jehož výstavba byla zahájena v roce 2013, je realizováno v jižním křídle uranového ložiska Rožná, na severovýchodním okraji strážeckého moldanubika, poblíž jeho styku se svrateckým krystalinikem. Důlní díla pracoviště jsou situována na 12. patře jámy Bukov-1, v hloubce přibližně 600m pod povrchem.
Fulltext: Download fulltextPDF

National Repository of Grey Literature : 71 records found   1 - 10nextend  jump to record:
See also: similar author names
7 SOUČEK, Karel
1 Souček, K.
7 Souček, Karel
2 Souček, Kryštof
Interested in being notified about new results for this query?
Subscribe to the RSS feed.