|
Markov Equilibrium between High Frequency Traders
Šmíd, Martin
We model an optimal behaviour of a finite number of (perhaps high frequency) traders at a limit order market with a instrument possibly paying dividends. The traders are assumed to trade continuously and to maximize their discounted consumption while keeping the probability of near-bankruptcy states at a prescribed level. The latency times, ie., the delays between the order submissions and the corresponding order books' changes, are taken into account. We show that the process describing the market is Markov given the largest among information sets of the agents.
|
|
Products with Protected Designations of the European Union and Their Position in Regional Tourism
Licková, Kamila ; Kalábová, Markéta (advisor) ; Abrhám, Josef (referee)
The master thesis deals with products with protected designations of the European Union. The main objective of the master thesis is to evaluate the importance of the chosen product with protected designation of the EU in regional tourism and analyse the perception of the product by a producer and by tourists. The sub-objective is the description of the European system of food labelling. The thesis is divided into five main chapters. The first part explains basic concepts which are related to the thesis. The second chapter introduces the best known food quality labels. Greater attention is devoted to the description of the food protection system of the EU. The third chapter deals with the characteristics of the chosen region Beskydy-Wallachia. The second part of this chapter is focused on the chosen protected product Štramberské uši. The forth chapter includes a structured interview with the chosen producer of Štramberské uši and a survey research, which was conducted in two phases. The last chapter contains the evaluation of the implemented survey. The main finding of this thesis is the fact that a relatively high percentage of respondents know the product Štramberské uši. An interesting finding is the fact that only a small portion of them know that the product Štramberské uši is the holder of the protected designation of the European Union. The chosen producer of Štramberské uši sees the main benefit of the label in greater publicity. Among problems he ranks the enforceability of the label and lack of general promotion of Štramberské uši.
|
|
Use of Interest Rate Models for Interest Rate Risk Management in the Czech Financial Market Environment
Cíchová Králová, Dana ; Arlt, Josef (advisor) ; Cipra, Tomáš (referee) ; Witzany, Jiří (referee)
The main goal of this thesis is to suggest an appropriate approach to interest rate risk modeling in the Czech financial market environment in various situations. Three distinct periods are analyzed. These periods, which are the period before the global financial crisis, period during the financial crisis and in the aftermath of the global financial crisis and calming subsequent debt crisis in the eurozone, are characterized by different evaluation of liquidity and credit risk, different relationship between financial variables and market participants and different degree of market regulations. Within this goal, an application of the BGM model in the Czech financial market environment is crucial. Use of the BGM model for the purpose of predicting a dynamics of a yield curve is not very common. This is firstly due to the fact that primary use of this model is a valuation of interest rate derivatives while ensuring the absence of arbitrage and secondly its application is relatively difficult. Nevertheless, I apply the BGM model to obtain predictions of the probability distributions of interest rates in the Czech and eurozone market environment, because its complexity, direct modeling of a yield curve based on market rates and especially a possibility of parameter estimation based on current swaptions volatilities quotations may lead to a significant improvement of predictions. This improvement was also confirmed in this thesis. Use of swaptions volatilities market quotations is especially useful in the period of unprecedented mone- tary easing and increased number of central banks and other regulators interventions into financial markets that occur after the financial crisis, because it reflects current market expectations which also include future interventions. As a consequence of underdevelopment of the Czech financial market there are no market quotations of Czech koruna denominated swaptions volatilities. I suggest their approximations based on quotations of euro denominated swaptions volatilities and also using volatilities of koruna and euro forward rates. Use of this approach ensures that predictions of the Czech yield curve dynamics contain current market expectations. To my knowledge, any other author has not presented similar application of the BGM model in the Czech financial market environment. In this thesis I further predict a Czech and Euro area money market yield curve dynamics using the CIR and the GP models as representatives of various types of interest rates models to compare these predictions with BGM predictions. I suggest a comprehensive system of three criteria, based on comparison of predicti- ons with reality, to describe a predictive power of selected models and an appropria- teness of their use in the Czech market environment during different situations in the market. This analysis shows that predictions of the Czech money market yield curve dynamics based on the BGM model demonstrate high predictive power and the best 8 quality in comparison with other models. GP model also produces relatively good qua- lity predictions. Conversely, predictions based on the CIR model as a representative of short rate model family completely failed when describing reality. In a situation when the economy allows negative rates and there is simultaneously a significant likelihood of their implementation, I recommend to obtain predictions of Czech money market yield curve dynamics using GP model which allows existence of negative interest rates. This analysis also contains a statistical test for validating the predictive power of each model and information on other tests. Berkowitz test rejects a hypothesis of accurate predictions for each model. However, this fact is common in real data testing even when using relatively good model. This fact is especially caused by difficult fulfilment of test conditions in real world. To my knowledge, such an analysis of the predictive power of selected interest rate models moreover in the Czech financial market environment has not been published yet. The last goal of this thesis is to suggest an appropriate approach to obtaining pre- dictions of Czech government bonds risk premium dynamics. I define this risk premium as a difference between government bond yields and fixed rate of CZK IRS with the same length. I apply the GP model to describe the dynamics of this indicator of the Czech Republic credit risk. In order to obtain a time series of the risk premium which are necessary for estimation of GP model parameters I firstly estimate yield curves of Czech government bonds using Svensson model for each trading day since 2005. Resulting si- mulations of risk premium show that the GP model predicts the real development of risk premiums of all maturities relatively well. Hence, the proposed approach is suitable for modeling of Czech Republic credit risk based on the use of information extracted from financial markets. I have not registered proposed approach to risk premium modeling moreover in the Czech financial market environment in other publications.
|
|
Light Induced Degradation of Solar Cells
Indra, Jiří ; Solčanský, Marek (referee) ; Vaněk, Jiří (advisor)
This master’s thesis deals with light induced degradation problems. In theoretical section it describes essentials of PN junction function and next light induced degradation mechanisms of solar cells and its symptoms at solar cell operation. In practical section it deals with set of measurements of solar cells since production of the silicon wafer to the complete solar cell. Selected cells are submitted to light induced degradation, measured dependencies are then evaluated. Degraded samples are subsequently recovered by two ways at high temperature treatment. The issues are evaluated.
|
|
How are high school students informed about virus biology
Solarová, Pavlína ; Drda Morávková, Alena (advisor) ; Fraiberk, Martin (referee)
Biology is the study of viruses, which are engaged in teaching 2-3 lessons. During those hours, students must not only absorb information about the structure and function of the virus, but also the reproduction of the organism, several representatives and, ultimately, diseases that cause that exists prevention and treatment these diseases. Students remember what it is for the vaccine, the virus infects whom, how they can get infected or what the immune system. What makes the problem of students are questions: which of the viral disease is, what constitutes a viral particle, or what is an infectious disease. In the RVP G is determined curriculum is very vaguely. The teacher thus has a certain freedom in creating the ŠVP and its preparations. To more precise what students should know for graduation, testing requirements used common catalog of the school-leaving examination in this case of biology, who has broken the outputs of the curriculum of all biological disciplines.
|
|
Impact of low oil and natural gas prices on the economy of Qatar since 2014
Šamánek, Ondřej ; Stuchlíková, Zuzana (advisor) ; Hasík, Gabriel (referee)
The bachelor thesis examines the impact of the oil and gas prices slump, which befell the world in 2014, on the economy of Qatar. The main objective of the thesis is to evaluate if and to what extend the price collapse influenced the relevant economic indicators and behaviour of the state and companies active in the affected field. The selected objective is examined using the method of data comparison, namely before and after the price slump, and with the help of the case study, in which the qatari company operating in the oil and gas is examined. From the conducted analysis it is possible to conclude that Qatar was directly influenced by the oil and gas prices collapse: its GDP slumped, fiscal deficit increased. The analysed company also experienced troubles caused by low prices: one year after the price slump, total amount of assigned tenders to company decreased substantially and historically high number of tenders was cancelled. Conclusions deriving from the thesis might be applied to other oil and gas export economies in the Persian Gulf, for fundamental traits of such economies are shared with the economy of Qatar.
|
|
A Comparison of Preconditioning Methods for Saddle Point Problems with an Application to Porous Media Flow Problems
Axelsson, Owe ; Blaheta, Radim ; Hasal, Martin
The paper overviews and compares some block preconditioners for the solution of saddle point systems, especially systems arising from the Brinkman model of porous media flow. The considered preconditioners involve different Schur complements as inverse free Schur complement in HSS (Hermitian - Skew Hermitian Splitting preconditioner), Schur complement to the velocity matrix and finally Schur complement to a regularization block in the augmented matrix preconditioner. The inverses appearing in most of the considered Schur complements are approximated by simple sparse approximation techniques as element-by-element and Frobenius norm minimization approaches. A special interest is devoted to problems involving various Darcy, Stokes and Brinkman flow regions, the efficiency of preconditioners in this case is demonstrated by some numerical experiments.
|
|
STRAIN ENGINEERING OF THE ELECTRONIC STRUCTURE OF 2D MATERIALS
del Corro, Elena ; Peňa-Alvarez, M. ; Morales-García, A. ; Bouša, Milan ; Řáhová, Jaroslava ; Kavan, Ladislav ; Kalbáč, Martin ; Frank, Otakar
The research on graphene has attracted much attention since its first successful preparation in 2004. It possesses many unique properties, such as an extreme stiffness and strength, high electron mobility, ballistic transport even at room temperature, superior thermal conductivity and many others. The affection for graphene was followed swiftly by a keen interest in other two dimensional materials like transition metal dichalcogenides. As has been predicted and in part proven experimentally, the electronic properties of these materials can be modified by various means. The most common ones include covalent or non-covalent chemistry, electrochemical, gate or atomic doping, or quantum confinement. None of these methods has proven universal enough in terms of the devices' characteristics or scalability. However, another approach is known mechanical strain/stress, but experiments in that direction are scarce, in spite of their high promises.\nThe primary challenge consists in the understanding of the mechanical properties of 2D materials and in the ability to quantify the lattice deformation. Several techniques can be then used to apply strain to the specimens and thus to induce changes in their electronic structure. We will review their basic concepts and some of the examples so far documented experimentally and/or theoretically.
|
|
ELECTRON BEAM REMELTING OF PLASMA SPRAYED ALUMINA COATINGS
Matějíček, Jiří ; Veverka, J. ; Čížek, J. ; Kouřil, J.
Plasma sprayed alumina coatings find numerous applications in various fields, where they enhance the properties of the base material. Examples include thermal barriers, wear resistance, electrical insulation, and diffusion and corrosion barriers. A typical structure of plasma sprayed coatings, containing a multitude of voids and imperfectly bonded interfaces, gives them unique properties - particularly low thermal conductivity, high strain tolerance, etc. However, for certain applications such as permeation barriers or wear resistance, these voids may be detrimental.\nThis paper reports on the first experiments with remelting of plasma sprayed alumina coatings by electron beam technology, with the purpose of densifying the coatings and thereby eliminating the voids. Throughout the study, several parameters of the e-beam device were varied - beam current, traverse velocity and number of passes. The treated coatings were observed by light and electron microscopy and the thickness, structure and surface morphology of the remelted layer were determined and correlated with the process parameters. Based on the first series of experiments, the e-beam settings leading to dense and smooth remelted layer of sufficient thickness were obtained. In this layer, a change of phase composition and a marked increase in hardness were observed.\n
|
| |
guest ::
