|
Analýza cestovního pojištění
Vernerová, Barbora ; Dědková, Eva (advisor)
Tato bakalářská práce se zaměřuje na analýzu cestovního pojištění. Cílem je analyzovat cestovního pojištění jak z teoretického tak praktického hlediska. Důležitou kapitolou je analýza cestovního pojištění po vstupu do EU.
|
|
Project metods utilization /disposal waste from selected machine works
Šíma, Kamil ; Nekvasil, Richard (referee) ; Novotný, Pavel (advisor)
The topic of my master’s thesis is waste management issue in selected engineering company with focus on industrial wastes. With use of information gained from selected engineering operation there is mentioned its brief characteristics, details about individual operations and products, impact of company activities on environment, facts about quantity of produced wastes and summary of current ways of waste management. On the basis of review of gained information there are suggested measures in the master’s thesis which realization would mean not only increase of material and energy utilization of produced waste, increase of degree fulfilment of waste economy and decrease of quantity of wastes placed in dump, but, in the long term, betterment of economical situation of company and its image.
|
|
Descriptive analysis of selected property transactions with companies ( commercial plant )
Hájková, Kristýna ; Pospíšil, Jiří (advisor) ; Vomáčková, Hana (referee)
Thesis on:" Descriptive analysis of selected property transactions with companies ( commercial plant)" is dedicated to understanding the challenges of ownership transakcions and their types . Subsequently, the work deals with thoroughly selected ownership transaction - merger acquisition . In this chapter, the thesis provides detailed information on the merger acquisition and its progress. In the practical part of the thesis analysis of three selected merger acquisition was made, where the analysis focuses mainly on changes in ownership structures and differences from revaluation , if this event occurred. The final chapter then compares the transactions again, especially in terms of ownership structure and difference from revaluation.
|
|
Design of mobile horizontal wood-splitting machine
Dressler, Jan ; Škopán, Miroslav (referee) ; Knoflíček, Radek (advisor)
This thesis shows making of documentation for production powerfull wood-splitting machine for hardest forestal work. There are researched and soluted all phases of pre-production machine's lifecycle, also means analysis of conception, potentional risks and failures analysis and also definition of required properties. Based on those properties and results of analyses is possible to setting up condition which should be satisfied. At following part are descripted and shown features of machine-design . Main feature (component) of machine is its frame, also there are strenght analysis of frame. Machine movement features are mainly hydraulics pistons which are powered by asynchronous engine, whith alternative possibility movement by wheel tractor power-take off shaft or hydraulics output. There are performed all important properties. Working safety questions and high endurability of machine shold be also performed. At the end of work is realised conception and design study of forestal production system for wood processing with one universal source of energy – wheeled tractor.
|
|
Production KAIZEN Application
Novák, Jaroslav ; Kotek, Luboš (referee) ; Fiala, Alois (advisor)
Theoretical part of this diploma thesis describe Kaizen method and parts of this method, which was developed in Japan after the Second World War. One part of this method is the 3MU concept, that includes definition of absences which influence all companies. One concept of the 3MU is “Muda”, who indicate waste. Practical part is interesting in wastes in sphere of productivity at one of the production department of the Bosch Diesel Ltd. in Jihlava. Individual operations of this department are considered in light of possibility introduction of more-machine operation and the checking of necessity of some machines. As a result is time data evaluation by REFA method and check of possibility introduction of more-machine operation with modification of working processes, calculation of industrial production capacity of some machines and the definition of buffer stocks. This modification of working processes, number of machines and the definition of buffer stocks needs change of layout of production department. At the conclusion there are calculated final costs and savings for implementation of this project.
|
|
Car cabin passive cooling system performance study
Viščor, Petr ; Hejčík, Jiří (referee) ; Fišer, Jan (advisor)
The work is focused on issue of passive cooling in a cabin of a car. The basic principles and mechanisms of heat transfer are described in the theoretical part and the quality of cabin environment in terms of thermal comfort and air quality is discussed as well. Next part of the work describing the principles of ventilation and air conditioning of cabins and possible methods of passive cooling are discussed. Passive cooling means decrease of temperature of cars interior, without need of energy supply from car battery, or fuel. The last part of the work includes numerical simulation of selected methods of passive cooling using the THESEUS-FE 3.0 software. Simulations were performed on model of Volkswagen Polo car and primarily were focused on testing of functionality of various methods of passive cooling.
|
|
Theoretical considerations on the liability of a sportsman in the Czech legal system (liability of a sportsman in collective sports)
Vondráčková, Liběna ; Beran, Karel (advisor) ; Hřebejk, Jiří (referee)
Závěrem lze konstatovat, že vytvořit všemi přijatelnou obecnou definici sportu, resp. sportovce, je úkol, který se zatím nikomu nepodařilo úspěšně vyřešit. Existence takové definice má svůj nesporný význam už jen proto, že chceme-li se zabývat "právní odpovědností sportovce", je třeba nejprve vymezit okruh osob, jichž především se předestřené úvahy týkají. Skrze historický vývoj jsem se v kapitole druhé pokusila naznačit rozsah sportovní činnosti, která je z hlediska požadavku jednotné obecné definice díky svému fenomenálnímu rozměru velice těžko uchopitelná. K významu této definice se pak znovu vracím v kapitole čtvrté v rámci vymezení subjektu odpovědnostních vztahů. Mnou zvolená definice je jistě jen jedna z mnoha možných a neklade si nárok na její bezvýhradné přijetí. Kapitola třetí je věnována exkurzi do historie, kde se vracím až na samotný počátek evropské civilizace, tj. do období antických Řeků a Římanů. Platí-li to pro práci jako celek, tak pro tuto kapitolu dvojnásob, totiž že s ohledem na limitovaný rozsah nemůže obsáhnout zkoumanou látku komplexně. Vedle zajímavého odkazu středověku v oblasti hodnocení sportovních úrazů je tedy věnována pozornost toliko pouze Antice. Nikoli však neprávem, neboť zde můžeme nalézt velmi inspirativní a obdivuhodně nadčasové myšlenky použitelné i ve 21. století....
|
|
Equipment for pressing the cataract into the injection pump housing.
Trutna, Pavel ; Šlais, Miroslav (referee) ; Forejt, Milan (advisor)
The goal of this work was the engineering of a new machine for pressing the cataract into the injection pump VP30 housing. Based on criteria from the point of view of ergonomics, assembly, shape of the housing and costs, the machine has been engineered so as to clamp the pump housing and press the cataract into the appropriate housing channel. Machine designing has been performed using 3D CAD software which is able to provide drawings and 3D data.
|
|
Krucemburk and the life of Skrivan-Binko's tanner family 1623-1948
Slavík, Jiří ; Velek, Luboš (referee) ; Hlavačka, Milan (referee)
The presented thesis [expanded diploma work] is introducing historical sonde into the daily life and also the interesting fates of the ancient Skrivan - Binko's tanner family. The family lived in eastern Bohemian small market - town Krucemburk on Bohemian - Moravian Uplands. We happen to be witnesses of gradual transformation of the country craft shop and manufactory business into the modern industrial enterprise during the space of time dated from the first half of the 17th century till the communism taking up period when family trade was completely nationalized [1948]. Simultaneously the reader is acquainted with the individual significant personalities of the tanner family. Through the passed centuries they had been excellent as far as the community management control, enlightenment, politics, culture and visual arts are concerned. The special attention is dedicated to the up to now neglected subjects - urban planning and building development of the small town, changes of the country landscape, material culture.
|
|
Application of a measuring probes in turning process
Verfl, Jan ; Slaný, Martin (referee) ; Polzer, Aleš (advisor)
My diploma work is focused on implementation of measuring probe to process of cutting operation by turning and description of their effective usage ways. Measuring probe are used as correction during turning process or to control measuring of turning work eventually to signal mistake in process. In practical part the laser measuring probe is used to control shaft functional dimensions. Measuring is done after tooling and it substitute exit control. Laser probe was also reviewed regarding usability for given purpose as measurement tool and in the same time were reviewed time and cost differences against alternative turning process.
|
guest ::
