|
|
Housing for Seniors
Pilík, Václav ; Blažková, Vendula (referee) ; Daněk, Lukáš (advisor)
The diploma thesis is elaboration of project documentation of the object Housing for seniors in Brno - Dolní Heršpice. The site is located un the area with the planned development of the city. The object is detached, three-story with a partial basement. The building is divided into five parts. The building is based on concrete foundation pads and strips. The structural construction is a combined column and wall system in technological design as monolithic concrete. The building is designed as a low energy building, with contact insulation (ETICS). The whole building is designed with forced air exchange. An extensive and intensive walkable flat roof is designed. The aim is to create small, barrier-free, community housing with affordable services and support, with a possible life expectancy. Services for the elderly with reduced self-sufficiency and with mild health and mental dysfunctions are considered. The building is equipped with space for accommodation with a capacity of 48 beds, space for eating with a separate kitchen, space for leisure and physical activities, space for basic health and social care and space for administrative and technical facilities. The construction is divided into several buildings, the subject of the thesis is primarily the solution SO.01 - Housing for seniors
|
|
|
Guest House in Brno
Budina, Martin ; jeneš, Rostislav (referee) ; Podroužková, Božena (advisor)
The purpose of this thesis is to present the static design of chosen parts of the supporting structure of Guest House in Brno. Part of the building is located below ground level, therefore the supporting structure is made of monolithic reinforced concrete frames holding the reinforced concrete slab. Above ground level the supporting structure is made of masonry construction with folded ceiling. Drawing documentation is included.
|
|
|
Reinforced concrete ceiling of house
Stloukal, Štěpán ; Šulák, Pavel (referee) ; Laníková, Ivana (advisor)
The bachelor’s thesis is focused on the design and assessment of monolithic reinforced concrete ceiling of house. Calculation of internal forces is carried out in a computer software SCIA Engineer with manual verification using the simplifield method. Assessment is done according to Eurocode 2 (ČSN EN 1992-1-1).
|
|
|
Frame reinforced concrete structure
Kalinová, Kristýna ; Perla, Jan (referee) ; Požár, Michal (advisor)
The aim of this bachelor thesis was design a part of a load-bearing cast-in-place reinforced concreate structure of the warehouse building. The load-bearing structure was designed of transversely oriented multi-storey frame. Floor structure consists of a continuous slab and secondary beams placed on the primary beams of the frames. The shape and reinforcement of the continuous slab, secondary beams, primery beam, column and pile cap was designed. Appropriate drawing documentation has been created for the proposed load-bearing elements.
|
|
|
Part of load-bearing structure of multipurpose building
Anděl, Martin ; Jeneš, Rostislav (referee) ; Terzijski, Ivailo (advisor)
The aim of this project was to design a part of a load-bearing structure of a multipurpose bulding. The load-bearing structure was designed of transversely oriented monolithic reinforced concrete multi-storey frames. These frames are in each storey connected by a continuous floor slab. Both design and relevant drawing documentation of a continuous floor slab, beam, column and a column footing was made in this project.
|
|
|
Selected structures of the family house
Kulík, Karel ; Švaříčková, Ivana (referee) ; Perla, Jan (advisor)
The bachelor thesis is focused on the design of selected reinforced concrete structures of the family house, it is a continuous ceiling plate and a staircase. The structures were designed and assessed to the ultimate limit state and the serviceability limit state. Calculations were made using the Dlubal RFEM 6 and Microsoft Excel programs. The outcome of the calculations is a static calculation. The design documentation including form and reinforcment mechanical draws was created in Archicad 26 and CADCON+ RC 2023.
|
|
|
Housing for Seniors
Pilík, Václav ; Blažková, Vendula (referee) ; Daněk, Lukáš (advisor)
The diploma thesis is elaboration of project documentation of the object Housing for seniors in Brno - Dolní Heršpice. The site is located un the area with the planned development of the city. The object is detached, three-story with a partial basement. The building is divided into five parts. The building is based on concrete foundation pads and strips. The structural construction is a combined column and wall system in technological design as monolithic concrete. The building is designed as a low energy building, with contact insulation (ETICS). The whole building is designed with forced air exchange. An extensive and intensive walkable flat roof is designed. The aim is to create small, barrier-free, community housing with affordable services and support, with a possible life expectancy. Services for the elderly with reduced self-sufficiency and with mild health and mental dysfunctions are considered. The building is equipped with space for accommodation with a capacity of 48 beds, space for eating with a separate kitchen, space for leisure and physical activities, space for basic health and social care and space for administrative and technical facilities. The construction is divided into several buildings, the subject of the thesis is primarily the solution SO.01 - Housing for seniors
|
|
|
Frame reinforced concrete structure
Kalinová, Kristýna ; Perla, Jan (referee) ; Požár, Michal (advisor)
The aim of this bachelor thesis was design a part of a load-bearing cast-in-place reinforced concreate structure of the warehouse building. The load-bearing structure was designed of transversely oriented multi-storey frame. Floor structure consists of a continuous slab and secondary beams placed on the primary beams of the frames. The shape and reinforcement of the continuous slab, secondary beams, primery beam, column and pile cap was designed. Appropriate drawing documentation has been created for the proposed load-bearing elements.
|
|
|
Reinforced concrete ceiling of house
Stloukal, Štěpán ; Šulák, Pavel (referee) ; Laníková, Ivana (advisor)
The bachelor’s thesis is focused on the design and assessment of monolithic reinforced concrete ceiling of house. Calculation of internal forces is carried out in a computer software SCIA Engineer with manual verification using the simplifield method. Assessment is done according to Eurocode 2 (ČSN EN 1992-1-1).
|
|
|
Part of load-bearing structure of multipurpose building
Anděl, Martin ; Jeneš, Rostislav (referee) ; Terzijski, Ivailo (advisor)
The aim of this project was to design a part of a load-bearing structure of a multipurpose bulding. The load-bearing structure was designed of transversely oriented monolithic reinforced concrete multi-storey frames. These frames are in each storey connected by a continuous floor slab. Both design and relevant drawing documentation of a continuous floor slab, beam, column and a column footing was made in this project.
|
guest ::
