|
|
Speciation analysis of mercury in liquid and gaseous samples
Žídek, Radek ; Kratzer, Jan (advisor) ; Spěváčková, Věra (referee)
Generation efficiency of four mercury species, namely elemental mercury and hydrides of methyl-, ethyl- and phenylmercury from liquid samples was quantified. The species chemically generated were quantitatively trapped on a gold-coated amalgamator to be subsequently determined by AMA-254 technique. Three types of construction of volatile species generators were compared. Generation effciciency among the species was comparable, fluctuating around 60% in the conventional flow injection generator equipped with a gas liquid separator with forced outlet. Better results were reached for elemental mercury and methylmercury hydride in an automated batch generator system. Generation efficiency was higher than 90% for these two species and between 60 to 80% for ethyl- and phenylmercury hydrides, respectively. Speciation analysis of elemental mercury and sublimate in gaseous samples was optimized. These two species dominate in flue gases produced during coal combustion or waste incineration. Combination of two sorbent tubes packed with alumina and gold-coated alumina enables selective and quantitative retention of both species. Sublimate is trapped on a column packed with alumina while elemental mercury is retained on gold-coated alumina. The capacity of both sorbents was investigated as well as the effect of...
|
|
| |
|
|
Speciation analysis of arsenic and mercury using postcolumn generation of their volatile compounds for needs of atomic spectroscopic methods
Linhart, Ondřej
The presented dissertation thesis deals with the use of UV-photochemical generation of volatile compounds (UV-PVG) as a derivatization technique for the combination of high-performance liquid chromatography (HPLC) and atomic absorption spectrometry (AAS) detection. Two model elements arsenic and mercury and their compounds were selected for the speciation analysis. The work was divided into several parts that follow. In the first part of the research, the apparatus for the UV-photochemical generation of the volatile mercury compounds and their detection with a new continuum source and high-resolution atomic absorption spectrometer (HR-CS AAS) with an externally heated detection tube was constructed. The analytical method was adapted for use with atomic fluorescence detection with the aim to improve sensitivity of the determination. Furthermore, apparatus for the electrochemical generation of cold mercury vapor with AAS detection was built. The construction of the apparatus was followed by optimization of the reaction conditions (concentration and flow of electrochemical reagents: sulfuric and hydrochloric acid, mobile phase, carrier medium, flow rate of the carrier gas and localization of its introduction), determination of the analytical figures of merit, and comparation of the methods. Both...
|
|
|
UV-photochemical generation of volatile compounds of selenium and tellurium
Nováková, Eliška
The presented thesis deals with UV-photochemical generation of volatile compounds of Se and Te from various species. The aim of the project was to expand the current state of knowledge by the application of photocatalytic reduction of higher oxidation states of Se and Te for the speciation analysis based on UV-photochemical generation of volatile compounds. The first step of the study was the assembly of the apparatus for the photocatalysed UV-photochemical generation of volatile compounds. The material of reactor and the whole experimental set-up were based on literature survey and previous research done in our research group. Experiments were directed towards finding the optimum conditions for generation of volatile compounds of selected model elements Se and Te. Se was studied as the element most commonly determined by the UV-photochemical generation of volatile compounds. Conversely, Te was selected as a model analyte representing elements forming less stable volatile compounds. The second part was the application of the optimised method of photocatalysed UV- photochemical generation of volatile Se compound to the determination of Se in water matrices, liquid certified reference materials and also samples of dietary supplements. TiO2/UV-photochemical generation was also successfully modified to...
|
|
|
Speciation analysis of arsenic and mercury using postcolumn generation of their volatile compounds for needs of atomic spectroscopic methods
Linhart, Ondřej ; Červený, Václav (advisor) ; Spěváčková, Věra (referee) ; Šíma, Jan (referee)
The presented dissertation thesis deals with the use of UV-photochemical generation of volatile compounds (UV-PVG) as a derivatization technique for the combination of high-performance liquid chromatography (HPLC) and atomic absorption spectrometry (AAS) detection. Two model elements arsenic and mercury and their compounds were selected for the speciation analysis. The work was divided into several parts that follow. In the first part of the research, the apparatus for the UV-photochemical generation of the volatile mercury compounds and their detection with a new continuum source and high-resolution atomic absorption spectrometer (HR-CS AAS) with an externally heated detection tube was constructed. The analytical method was adapted for use with atomic fluorescence detection with the aim to improve sensitivity of the determination. Furthermore, apparatus for the electrochemical generation of cold mercury vapor with AAS detection was built. The construction of the apparatus was followed by optimization of the reaction conditions (concentration and flow of electrochemical reagents: sulfuric and hydrochloric acid, mobile phase, carrier medium, flow rate of the carrier gas and localization of its introduction), determination of the analytical figures of merit, and comparation of the methods. Both...
|
|
|
Determination of arsenic species in seafood reference materials by ICP-MS with hydride generation and cryotrapping
Pokorná, Nikola ; Matoušek, Tomáš (advisor) ; Červený, Václav (referee)
The aim of this work was to determine chemical species of arsenic in sea originating certified reference materials. Measurements were done using method of hydride generation. Hydrides were preconcentrated in liquid nitrogen cooled tube and detected using inductively coupled plasma mass spectrometry. During the testing of the method, mutual conversion of arsenic species was observed for inorganic arsenic, monomethyl arsenic and dimethylarsenic. Further study revealed that with presence of matrix and hydrogen peroxide, demethylation occured only in hydride generation phase, not during extraction. Dissociation of hydrogen peroxide in extracts was verified using catalase. End of the demethylation process was proved using measurement with addition of arsenic species standards. The newly invented procedure was used to determine arsenic species in reference materials with sufficient accuracy. Final results are compatible with results from different method, and already published results as well. Key words: speciation analysis, arsenic, hydride generation, seafood, inductively coupled plasma mass spectrometry
|
|
|
UV-photochemical generation of volatile compounds of selenium and tellurium
Nováková, Eliška ; Hraníček, Jakub (advisor) ; Komárek, Josef (referee) ; Šíma, Jan (referee)
The presented thesis deals with UV-photochemical generation of volatile compounds of Se and Te from various species. The aim of the project was to expand the current state of knowledge by the application of photocatalytic reduction of higher oxidation states of Se and Te for the speciation analysis based on UV-photochemical generation of volatile compounds. The first step of the study was the assembly of the apparatus for the photocatalysed UV-photochemical generation of volatile compounds. The material of reactor and the whole experimental set-up were based on literature survey and previous research done in our research group. Experiments were directed towards finding the optimum conditions for generation of volatile compounds of selected model elements Se and Te. Se was studied as the element most commonly determined by the UV-photochemical generation of volatile compounds. Conversely, Te was selected as a model analyte representing elements forming less stable volatile compounds. The second part was the application of the optimised method of photocatalysed UV- photochemical generation of volatile Se compound to the determination of Se in water matrices, liquid certified reference materials and also samples of dietary supplements. TiO2/UV-photochemical generation was also successfully modified to...
|
|
| |
|
|
Synthesis and separation of arsenic-glutathione complexes
Balcárová, Barbora ; Petry-Podgórska, Inga (advisor) ; Červený, Václav (referee)
The arsenic-glutathione complexes are very unstable in solution and tend to decompose during separation in liquid chromatography. The aim of this work was to develop a relatively fast method of the synthesis and storage conditions for the arsenic-glutathione complexes. The thesis is focused on synthesis, stability in-solution and separation of arsenicglutathione complexes. The synthesis was carried out in solution of 2 mM TCEP (tris(2carboxyethyl)phosphine) in water and with excess of the glutathione. Solutions of 20 ppb arsenic-complexes were consecutively measured after 1h, 2h, 3h, 4h and 24 hours of synthesis. The results confirmed stability of the arsenic-complexes in the reaction mixtures over 24 h. The arsenic-glutathione complexes were separated using a reversed phase high performance liquid chromatography (RP-HPLC) coupled with inductively coupled plasma - mass spectrometry (ICP-MS). The chromatographic method was developed using Aeris widepore 3.6u XB-C18 250x2.10mm column. Isocratic and gradient elutions were compared using several compositions of mobile phases and time of the separation. Methods were tested using samples of synthesized arsenic-glutathione complex (DMAs(GS)). An application of the isocratic elution enabled elimination of time needed for the separation and conditioning of...
|
|
| |
guest ::
