|
|
Business Plan - establishment of fitbox centre
Albrechtová, Monika ; Navrátil, Jaroslav (referee) ; Rompotl, Jaroslav (advisor)
The topic of this thesis is the formation of a business plan for the establishment of the FitBox center A&M in the city of Litovel. Based on the theoretical findings applied into the practical part of the thesis, the current state of the market and the opportunities for establishing the specified business will be determined predominantly via analysis. The calculation of expenses is one of the main pillars for the actual proposal of said business plan.
|
|
|
Risk assessment of the machine according to ČSN 12100:2011
Steklý, Jakub ; Stibor, Karel (referee) ; Štohl, Radek (advisor)
This thesis deals with the safety of engraving machine. The main contribution of this thesis is the detailed implementation of the risk assessment according to valid standards. Further detailed design of measures to meet all safety requirements. Part of this thesis is familiarity with the machine and its current state and the procedure of risk analysis. Another part is the risk assessment. Conclusion of this thesis includes the documentation and ES certificate of conformity.
|
|
|
Genetic diversity and evolutionary history of Czech endemic taxa from the genus Dianthus
Vítová, Jana
This MSc. thesis deals with karyological, genetic and phenotypic variation of selected taxa from the genus Dianthus L. in the Czech Republic and adjacent countries. The evolutionary history of the genus has been shaped by several microevolutionary processes, including interspecific hybridization, genome duplication, and edaphic speciation. These processes led to the origin of a number of phenotypically similar taxa, which are often restricted to a narrow geographic area. One subendemic and three endemic taxa occur in the Czech Republic. These (sub)species were used as model groups to gain insight into microevolutionary processes in small populations and the postglacial development of the genus in Central Europe. The thesis consists of three parts, each addressing different evolutionary phenomenon: Dianthus arenarius subsp. bohemicus is a critically endangered endemic psammophyte currently known from a single population in Central Bohemia. The site is also inhabited by widespread D. carthusianorum. Interspecific hybridization has been suspected on the basis of morphological characters, but this has never been confirmed by any other technique. I exploited differences in the number of chromosomes between both species and, with the aid of DAPI flow cytometry, estimated relative DNA contents of most...
|
|
|
Cardiovascular disease and smoking. Treatment of tobacco dependence and cardiovascular risk
Zvolská, Kamila ; Králíková, Eva (advisor) ; Šteflová, Alena (referee) ; Tuček, Milan (referee)
(EN) Introduction: Tobacco dependence is one of the four major risk factors (RF), cardiovascular (CV) disease (CVD). Objective: Analysis of CV risk of patients of our Center for Tobacco-Dependent. Methods: A retrospective assessment of the presence of CVD, RF for CVD and CV risk level according to the method SCORE in our patients - smokers from 2007 - 2009 (N = 1,349, 52.2% males, age range 25-64 years, mean age 44 ± 11, 7). CV risk was also evaluated one year after the baseline visit including newly diagnosed CVD RF, abstinence from smoking was validated by carbon monoxide in expired air. The results were compared to those of smokers in the study postMONICA (N = 1,122, 54.5% men, mean age 46 ± 11). Compared to the general population of smokers (postMONICA) significantly more Center patients had automatically high CV risk and CVD. The prevalence of type 2 diabetes was comparable as well as prevalence of hypertension and dyslipidemia in smokers without automatically high CV risk. Significantly fewer Center patients without automatically high CV risk were obese, family history was also significantly lower risk. Significantly more women with low RF and significantly fewer men aged 55-59 and women aged 55-64 with SCORE ≥ 5% came to the Center. Success rate of Center patients with SCORE < 5 % was 44.3 %...
|
|
|
Business Plan for an internet project Svetotrip.cz
Košťál, Michal ; JUDr.j Jaroslav Navrátil (referee) ; Rompotl, Jaroslav (advisor)
The thesis deals with the business plan of the online project Světotrip.cz. It is a travel portal that connects experienced travelers with people who don`t have much experience with individual travelling. The goal is to reach out to the public in general and offer them the possibility of low-cost travel. The introductory part contains theoretical starting points and explains the necessary terms. The second analytical part evaluates the market environment through external, internal and sectoral analyzes. The final part focuses on the development of a actual business plan. The reader will be thoroughly acquainted with the goal of the whole project, the various services offered, the competitive advantage and the specific business model of the whole project.
|
|
|
Risks of logistics management in a company
Štěpančík, Ondřej ; Kuba,, Karel (referee) ; Milichovský, František (advisor)
The diploma thesis titled Risks of logistics management in a company deals with the analysis of flow quality in the logistics chain of selected internet shop Notino.cz. The work is divided into three parts. The theoretical part describes the theoretical bases on the basis of specialized literature. The analytical part analyzes the current state of quality, processes in the enterprise, and an analysis of the causes and consequences. The design part draws conclusions from the analyzes, proposes and looks for measures to reduce or eliminate the identified risks.
|
|
|
Risks of the Dropshipping and the B2C Sales
Chupík, Radek ; Kupčík, Petr (referee) ; Ptáček, Roman (advisor)
The diploma thesis titled Risk of dropshipping and B2C sale deals with the analysis and evaluation risks in proces of executing an order at e-shop Zahradavpohode.cz. This businnes subject in this proces uses two business models – dropshipping and B2C sale. The theoretical part is serving to gain information about problmatics. In the analytical part this knowledge is used for analysis of currnet staus, proces, identification and evaluation risks. The design part is making conclusions from the analyzes, proposing and looking fot a available use of company businness models view finances and risks.
|
|
|
Operation of transportation and haulage firms and its risks
Kůstková, Eliška ; Fidrichová, Ivana (referee) ; Adamec, Vladimír (advisor)
The diploma thesis deals with risk management in a selected company, which is ČSAD LOGISTIK Ostrava, a. s. This thesis is divided into two parts, where the first part deals with the analysis of the current situation, which is the transport sector in the Czech Republic and its relevant legislation. Subsequently also deals with the terms related to the identification, analysis and elimination of risks. In the second part is the theoretical knowledge is applied in such a way, that from the results obtained with What IF and FMEA analyzes is later created a suggested plan for risk prevention and its elimination.
|
|
| |
|
|
Control of packaging machine using Safety PLC
Žiak, Martin ; Novotný, Radek (referee) ; Štohl, Radek (advisor)
This thesis deals with a technology of continuous packaging machine in the beginning from the point of risk assessment and design of necessary measures to reduce the risk as much as it is possible. Here the HRN method was used to quantify every risk factor. Next part documents the implementation of the safety measures and the realization of the safety circuits by using Simatic S7–1500F safety PLC and Shared device functionality. Safety function which is realized in the Sinamics S120 drive is Safe Stop 1. Next, it describes the drive dimensioning and the principle of the drive control. Simotion PLC is discussed in more details and then is used as a motion control master. An approach to the configuration of camming synchronous operation is dealt with in details. Cam design and their realization is documented, too. The thesis also demonstrates the state manager that was implemented in the user program and which is used according to the concept of OMAC state manager. In the end a simple HMI for packaging machine control is described.
|
guest ::
