|
|
Design of small hydropower plant for specific location.
Paštěka, František ; Rudolf, Pavel (referee) ; Štigler, Jaroslav (advisor)
This master's thesis is specialised in designing of small hydropower plant for specific location. In work should be designed suitable turbine for parameters found on the site, then created a basic project documentation of small hydropower plant with all devices and used principles, so that the plant would be capable of operation. In the next part of thesis should be extented the calculation of flow in the turbine delivery and assessed effect of geometry of turbine delivery on the flow.
|
|
|
Family House Rb-1
Březina, Jan ; Sibilla, Luboš (referee) ; Vlček, Milan (advisor)
Bachelor´s thesis includes the design and construction plan for a family house with a place of business in the town of Olomouc in the stage of project documentation for construction. The object has a rectangular ground plan, one basement, three groundfloors, attic and roof. The roof is designed as a saddle. To the building lead a pedestrian and access roads and the land is fenced. The main part of the building is intended for living, groundfloor is using for store with the purpose of the travel agency.
|
|
|
Multifunctional house
Kostrhounová, Irena ; Vlček, Ing Karel (referee) ; Vlček, Milan (advisor)
This diploma thesis deals with the solution of a construction of a corner gap site. A multifunctional house comprising three business establishments and nine residential units has been designed. Business premises will be used as stores. The apartments are designed for 4-member families. The multifunctional house has an atypical ground plan with a total area of 512 m2. The object has a basement and four above-ground floors, the business establishment is located on the first above-ground floor. The garage will be operated in automatic parking mode. The entire building is covered with a single-layer flat roof. The project is processed using the AutoCAD computer program.
|
|
|
Rehabilitation centre, Pasohlávky
Skříčková, Alžběta ; Císař, Lukáš (referee) ; Müller, Jan (advisor)
The diploma thesis deals with the design of a rehabilitation center, which is located in the cadastral area of the village Mušov on the border of the village Pasohlávky. It is a two-storey rehabilitation center with a gym and a partial basement. The thesis deepens the initiative of Thermal Pasohlávky, which plans to build a spa resort in the same section, combining elements of spa care, recreation and sports use. The object fulfills the function of a rehabilitation medical facility. The center is designed for up to 50 patients and is functionally divided into three parts. The first part consists of rehabilitation. We will find here several exercise rooms, hydrotherapy, electrotherapy, doctor's office with waiting room and reception. Rehabilitation also includes a gym with access to the terrace and park. On the second floor we can find specialized department of ergotherapy for people with different types of disabilities and second functional part of the bulding designed for staff facilities. It is made up of staffing facilities, dressing rooms, offices and meeting rooms. The third functional part consist from the technical background of the building and is located on the ground floor. The object is designed as a wall system, built from sand-lime bricks km beta Sendvix and insulated with the ETICS thermal insulation made from mineral wool. Horizontal supporting structures are designed as reinforced concrete. The entire building is roofed with a flat roof. Wooden windows and doors are used in the building to fill the holes. Before the building is a parking lot for employees and visitors of the rehabilitation facility. The design respects the principles of barrier-free solutions. The bachelor thesis is elaborated in the form of a project documentation for the execution of the construction.
|
|
|
Multifunctional house
Strýhal, Martin ; Vlček, Ing Karel (referee) ; Vlček, Milan (advisor)
The diploma thesis deals with the development of the vacant lot in Prague - Libeň at the PCB level. A multifunctional house is designed, which includes three establishments and eleven housing units. The premises will be used as shops. The apartments are designed for 2 to 4-member families. Multifunctional house floor plan with a total area of 683.1 square meters. The building has a basement with five floors, the premises are located on the first floor. There is a pedestrian and driveway to the building. Behind the object away from the main road is an outdoor parking lot. The underground garage will be accessed by a car elevator. The whole building is covered with a sloping roof. The project is processed using the computer program AutoCAD.
|
|
|
Detached House with Design Office
Večeřa, František ; Melcr, Petr (referee) ; Fišarová, Zuzana (advisor)
Bachelor’s thesis deals with a design of a house with design office. It is the new house on a plot number 3052/58, which is located in the city of Bystřice nad Pernštejnem in Vysočina. The building is identified for housing four members family (parents, two children). Part of the building is design office, which owner of the house will use for his business activity. In the future it is possible this office rent out. The building is without cellar. The house has two floors, the design office and a garage have one floor. The vertical contructions are designed from a sandwich brickwork. A hipped roof is designed.
|
|
|
Masonry Block of Flats
Recmanik, David ; Havířová, Zdeňka (referee) ; Lavický, Miloš (advisor)
This Master´s thesis is focused on block of flats project documentation. The documentation is worked for building construction. Emphasis is placed on structural, space, fire safety, thermal and acoustic requirements. Masonry building is secluded and has four floors, without cellared, with a gabled roof. The building is designed with eight flats and one of these flats is designed for persons with reduced mobility.
|
|
|
Multi-functional residential building -Ro-7
Urban, Michal ; Sibilla, Luboš (referee) ; Vlček, Milan (advisor)
Bachelor’s thesis includes the design and construction plan for a family house with a place of business in the town of Brno in the stage of project documentation for construction. The family house is designed as a full-basement structure, with one basement, two above grade storeys and attic. The roof is designed as a saddle. To the building lead a pedestrian and acces roads and lan dis fenced. The main part of the building is invented for living, groundfloor is using for store with the purpose of the account agency.
|
|
|
End house
Jurkovičová, Lucie ; Vlček, Ing Karel (referee) ; Vlček, Milan (advisor)
This diploma thesis deals with the design of an end dwelling house with a café in Žatec (district of Louny). It is a partly basement, detached object on a slightly sloping terrain. The apartment building has one underground floor and three above-ground floors. It consists of six housing units of varying size and layout. On the ground floor there is a cafeteria, while on the second and third floor there are always 3 flats. The end house has an atypical ground plan and is roofed with honeycomb roof. The project is processed using the ArchiCAD computer program.
|
|
|
Risk analysis and evaluation of using automated systems in building construction design
Koza, Josef ; Bednářová, Bronislava (referee) ; Vymazal, Tomáš (advisor)
This thesis in its first part deals with the complexity of the legislation, which is related to design activities and also trying to explain the basic rules for the creation of project documentation. In the main section then analyzes and evaluates the selected drawing software in defined categories. Based on the selection chooses the best drawing software and compared with the hand-crafted version of the design documentation in terms of time and cost. The final time for the creation of project documentation will be converted to a built-up area of the building and found the relationship between time constraints and the size of the built-up area of the new building. It will also be evaluating the return on investment to drawing software and assessing cost-effectiveness of various options drawing. The aim of this thesis is to analyze the risks in the use of software products for structural design and evaluate their use based on the value of work.
|
guest ::
