National Repository of Grey Literature 136 records found  previous11 - 20nextend  jump to record: Search took 0.01 seconds. 
Possibility of using EMW radiation for killing biotic pests
Gintar, Jan ; Klečka,, Tomáš (referee) ; Pěnčík, Jan (referee) ; Šuhajda, Karel (advisor)
The remediation of building elements and structures in terms of moisture and sterilization (inactivation) of biotic pests is dealt with quite often in construction practice and in the construction industry itself, and is thus a topical issue. The issue is dealt with by specialized companies that know the use of available technology on the market, or are themselves involved in the development and improvement of these devices. Several methods are known for the removal of moisture and sterilization of biotic pests, with sufficiently high-quality data on the technology used, the suitability of the equipment used, a more detailed description of the application of the methods themselves and the results themselves. The methods themselves, for removing moisture and eliminating (inactivating) biotic pests, must be chosen according to individual requirements, as some methods will be more appropriate (more effective) and some less suitable. For the practice itself, however, it is important that the methods are sufficiently effective and at the same time available to the wider public (their economic side). In my dissertation thesis I focus on the potential of EMW radiation utilization not only for liquidation of biotic pests (fungi, fungi, wood decaying insects), but also elimination or reduction of necessary conditions for survival or development of these biotic pests. Therefore, my work also focuses on the presence of moisture, because moisture is a common factor in the vast majority of problems associated with the occurrence of biotic pests. Due to its intensity, it is one of the less time-consuming method and therefore a more cost-effective (economically) method. The research I conducted at VUT FAST focused on the use of microwave radiation in the control of biotic pests, under conditions that are close to those on real constructions. The use of a microwave method to eliminate biotic pests and at the same time to remove moisture has proved to be advantageous.
Construction technological project of sports hall construction
Tkáč, Jiří ; Vlčková, Jitka Laura (referee) ; Diaz, Yvetta (advisor)
The thesis deals with Komenského Street sports hall construction in Lysá nad Labem. Although partially dealing with construction of all parts, in detail it studies gym construction, focusing on time management, technology and resources of implementation. The thesis is divided into the drawing and text parts. The former includes site facilities design and building situation. The latter consists of the main part construction project implementation study, itemized budget, time schedule, technological regulations, inspection and testing plan for the implementation of the main construction part 1st floor reinforced concrete columns and walls, construction machines and mechanisms design as well as time and financial schedule.
Survey and Diagnostics of Brick Structure
Brothánek, Jan ; Heřmánková, Věra (referee) ; Anton, Ondřej (advisor)
The diploma thesis deals with a structural and technical survey of the surviving cellar of the German House in Brno. The first part of the thesis is devoted to the theoretical description of the constructions, methods performed and their evaluation concerning the investigated space. The aim of the survey is to determine the strength characteristics of the masonry and on their basis to propose appropriate rehabilitation and structural protection.
Hotel Welpas
Kalousová, Kamila ; Spáčil, Miroslav (referee) ; Sedláková, Markéta (advisor)
The project documentation addresses the design of a wellness hotel with a restaurant on a plot in the village of Pasohlávky. It is a two-storey partly basement building of an interesting quarter-circle shape. The vertical load-bearing walls are made of the Ytong system, the ceiling structures are reinforced concrete monolithic and the roof is warm flat with vegetation treatment. The plan also includes the connection of engineering networks to the building, modification and strengthening of adjacent areas on the plot, establishment of an internal area transport road to connect to the existing service road, parking space and landscaping.
Development of masonry systeme for simple construction of internal masonry structures
Lidmilová, Klára ; Dobiáš,, Jiří (referee) ; Zach, Jiří (advisor)
The diploma thesis deals with the development of a new masonry system, for the production of which recycled brick could be used as a secondary raw material. In the field of literary research, the work deals with the methods of construction of vertical structures, the possibilities of lightening concrete, the life cycle of building materials and the use of secondary raw materials in construction. In the practical part, a masonry system was designed based on market research in the field of internal non-load-bearing masonry structures and requirements for these structures. In order to achieve these properties, concrete was chosen as the material for its production, where recycled brick was used as an alternative aggregate. As it is supposed to be a system for precise masonry, the material was compacted by vibrocompression. At the beginning, recipes were designed to verify the basic properties of concrete: density of hardened concrete, compressive strength and tensile bending strength, then other properties such as thermal conductivity and sound absorption coefficient were tested on improved recipes. Lightening and dimensional modules have been modified to achieve optimal properties. This was followed by a proposal for the method of masonry and surface treatment of a wall. Finally, the economic and environmental aspects of the masonry system were evaluated.
Conversion of a historic building for recreational purposes
Kašáková, Kristína ; Požár, Michal (referee) ; Strnad, Jiří (advisor)
The aim of the bachelor thesis is to assess selected parts of the construction of a historic building. The work consists of a diagnostic and design part. The diagnostic part focuses on the object measurement and mortar and steel strength performance testing . The measured data and load-bearing walls in the 1st floor and 2nd floor above-ground and the vault above the 1st above-ground floor are processed in the projection part. The output of the work are object drawings, performed tests protocols and static calculations of the structure.
Apartment building
Joof, Wally ; Machová, Petra (referee) ; Vajkay, František (advisor)
ABSTRAKTNÍ Cílem předložené bakalářské práce je provést návrh a vytvořit projektovou dokumentaci obytného komplexu umístěného v Brně-venkově (Rajhrad). Budova má čtyři bytových jednotek v každém z pěti nadzemním podlaží. Byty v každém podlaží jsou umístěny symetricky vůči sobě a mají identickou dispozici. Sklepení je navrženo především jako úložný prostor, kočárkárna pro ukládání jízdních kol a kočárků, úklidová místnost prádelna a sušárna a toalety. Nosné stěny konstrukce jsou tvořeny z bloků z vápenného písku, dále příčky z vápenného písku, a monolitické desky. Sklepní prostory tvoří monolitické konstrukce. Střecha je plochá. Celá budova je funkčně i architektonicky navržena s ohledem Na danou lokalitu.
Implementation of Superstructure of Apartment Building in Havirov
Kolmačka, Ondřej ; Nečasová, Barbora (referee) ; Liška, Pavel (advisor)
This bachelor's thesis deals with the elaboration of a technological project for the stage of rough superstructure of an apartment building in Havířov. The vertical construction system of the apartment building is made of sand-lime blocks. The horizontal construction system consists of monolithic reinforced concrete structures. The content of this bachelor's thesis is the elaboration of a technical report on a construction technology project, the situation of construction with closer transport relationships, construction supply design, item budget for selected technological processes, technological regulation for vertical structures - masonry, construction organization for a given technological stage, including equipment drawing. construction site, time schedule for the technological stage, balance of resources, technological analysis, design of machinery for the technological stage, quality requirements and their provision in the implementation of vertical load-bearing structures – masonry and occupational safety of the solved technological stage. Furthermore, the calculation of the construction according to technical and economic indicators, the accompanying and summary technical report and diagrams.
Survey and Diagnostics of Building Construction
Frimlová, Eva ; Heřmánková, Věra (referee) ; Anton, Ondřej (advisor)
This thesis deals with the construction survey and diagnostics of the New synagogue in Velké Meziříčí. The aim of the work is to perform an inspection, construction survey of the building and evaluation of its current condition using classical survey and diagnostic methods. The work is processed as the final report from the construction and technical survey of the building. It contains its course and results. The main part of the survey is brick masonry, its failures and structural assesment. The thesis includes also survey of foundation structures, the history and description of the building.
Structure of apartment building
Řihošek, Jan ; Pulec, Vladimír (referee) ; Perla, Jan (advisor)
The diploma thesis deals with the design of the floor structure of an apartment building in two structural variants. The aim of the work is to find out the internal forces, design and check in two construction variants. Finite Element Method was used for calculation internal forces using 2D model for floor slab and 3D model of building in the Dlubal RFEM 5.24. The work also includes check of masonry walls.

National Repository of Grey Literature : 136 records found   previous11 - 20nextend  jump to record:
Interested in being notified about new results for this query?
Subscribe to the RSS feed.