|
|
Application of Management Control System in a Business
Špicarová, Kateřina ; Marvanová, Radka (referee) ; Žižlavský, Ondřej (advisor)
The master´s thesis is focused on application of Management Control System in company especially on planning and analysis of deviations. In theoretical part of the thesis will be described basic charakteristic and terms and will be used continualy in the analytical part. In this part Honeywell s.r.o. will be described and analyzed its current situation and methods for planning costs. Then will be analyzed and interpreted deviations based on actual data in MS Excel. In the proposal part will be propose actions to improve the current situation in the form of implemetation new program MS Power BI or Tableau into controlling team.
|
|
|
Refurbishment of the Brno - Tuřany Airport
Paťha, Radim ; Ruller, Ivan (referee) ; Nový, Alois (advisor)
This diploma thesis describes the reconstruction of the operation parts in the international airport in Brno and proposal of a new arrivals hall. The diploma thesis also shows the specific management of the airport, connection with the existing concourse and design of an appropriate concept of addition of new buildings with currently missing services. The reconstruction deals with the insufficient capacity of the arrivals hall and current bad technical conditions and its inconvenient capacity of arrivals and departures. In this concept, the airport capacity is doubled, up to 2 000 000 passengers per year. This concept, based on axial and mutual synergy of building parts, contains a design of two objects, the central part with public services (clearance, waiting hall, restaurant, control tower, areas for rent, arrivals and departures support), and arrivals hall (inspection, luggage clearance hall). The diploma project is developed in the range of a study. It is based on a previous urban study of the airport in connection to following-up the development of neighboring towns and surrounding area.
|
|
|
Statistical inspection
Vyškovský, Jaroslav ; Fiala, Alois (referee) ; Pernikář, Jiří (advisor)
This work solving with the statistical inspection verification of big amounts of products imported to Czech Republic. Work it self is designed as general handbook and it will be possible to use it on other products then the model one. This work was elaborated with company which is importing screws for wood industry. We used common standards to define quality requirements of verificated products, and to design statistical inspection plans. The goal of this work is technical and economical evaluation of designed method, which was used on model product.
|
|
| |
|
|
Zero defects process
Drábková, Veronika ; Krbalová, Maria (referee) ; Fiala, Alois (advisor)
The present bachelor thesis deals with description of the strategy and implementation of Six Sigma in business. Is it deals with basic procedures and guidelines on how to implement this strategy, fourteen key principles for management for transforming business effectiveness. The last part deals with Lean Six Sigma, which is a modification of Six Sigma.
|
|
|
Inspection of welded joints of loading ramps
Ertl, Roman ; Mrňa, Libor (referee) ; Kubíček, Jaroslav (advisor)
This master's thesis is focused on problem of welding of loading ramps and inspection of their welded joints. The aim of this thesis is to inspect the welds of loading ramps with regarding to the appearance of defects. The literature review of the research issues of the MIG welding technology and welding of aluminium and its alloys is described in this thesis. There is also described destructive and non-destructive inspection of welds that can be applied to inspection of loading ramps. Theoretical description is followed by an experimental part of the thesis. Experimental part is focused on the three destructive tests (the tensile, the macroscopic and the hardness test) of samples of loading ramps, which are made of EN AW-6005A T6.
|
|
|
Determination of duration that driver needs to assess the situation behind the vehicle in course of turning or overtaking manoeuvres.
Belák, Michal ; Rábek,, Vlastimil (referee) ; Kolíbal, Zdeněk (referee) ; Semela, Marek (advisor)
The dissertation thesis deals mainly with determining of the duration that driver needs to assess the situation behind his vehicle at manoeuvers of turning and overtaking, based on the measurements made in real road traffic. These are common and frequent driving manoeuvers, which the driver performs while driving the vehicle in regular road traffic. For their safe execution the driver needs to have sufficient amount of information about the situation around the vehicle and especially behind the vehicle. This information can driver usually gain from devices for indirect vision, most often rear view mirrors. The time thus defined, suitable e.g for the needs of forensic engineering applications for the analysis of road accidents, has not been studied in detail yet. For the purpose of its determination, therefore, an extensive analysis of the current state of problematics related to the indirect vision from the vehicle was carried out. There were formulated influences on the time duration and with this related characteristics of humans as a part of the driver-vehicle-environment system in the thesis. The characteristics of human perception were investigated and the problematics of reaction time was discussed. Existing research focused on the duration of rear view mirrors glances was analyzed and possible methods of its measurement in detail were presented by author. Based on this, an experiment was designed and realized, the time necessary for rear view mirror glances was defined by the author. The results enable to quantify the time that the driver needs for assessing the situation behind the vehicle in connection of turning, overtaking and other driving manoeuvers when the driver needs to change the driving direction. The conclusions showed that the time needed to evaluate the situation behind the vehicle by means of the rear-view mirrors does not normally exceed duration 1 second.
|
|
|
Automated Checking of PC Status
Hodáň, Ján ; Řezníček, Ivo (referee) ; Zemčík, Pavel (advisor)
This thesis describes the design and implementation of automatic control of computer visualization. At the beginning computer control will be introduced. Familiarization with computers control procedures will take the place. Subsequently, another methods that can apply the control will be introduced. The main part of the work will be devoted to describe the basic skills that related to computer control. The last chapter will explain how visualization is implemented and how we evaluated the success of visualization. Result of the work is an application that visualize process and thanks to that control will be easier, faster, improved and automated.
|
|
|
Verification Tightness of Headlamp
Maule, Jiří ; Pernikář, Jiří (referee) ; Osička, Karel (advisor)
The task of my work is to describe and analyse tightness control of front headlights in automotive industry. This work is concerned with theoretical indi-cative allocation according to the light source, development and contruction of headlights in preamble. There is shown the way of disclosing the outflow pres-sure area at loose headlight in next part of this work. It defines the most proba-bly caused reason of untightness with help of Ishikawov diagram. There is also made evaluation of measured values and determined the main cause of un-tightness. At the end there are shown possibilities of statistic´s evaluation of measured values and made changes necesarry for untightness elimination.
|
|
|
Building Construction Project - Implementation of Production Hall ADS s.r.o. Větřkovice
Ráb, Jakub ; Diaz, Yvetta (referee) ; Nečasová, Barbora (advisor)
The subject of my master's thesis is construction technological project of the hall ADS s.r.o. Větřkovice. The work includes technical report of construction technological project, facilities of construction zone, solving traffic routes from the production to the place of construction, study of the implementation of the main technological stages of the building SO02, the most appropriate machine assembly, technological specification for drilled piles and for montage of prefabricated reinforced concrete skeleton, control and test plan, schedule of work, itemized budget, plan of the safety and health protection during work, proposals of design of movement mechanisms and time and financial discretion of realization of the reinforced areas of the production hall area.
|
guest ::
