|
|
Control system for circle of coolig water
Kouřil, Jan ; Chomát, Luděk (referee) ; Pivoňka, Petr (advisor)
Main focus of bachelor thesis is to present practical construction of cooling circuit in customer quenching room, in all it's wide. From simple introduction to technological background (cooled technologies) and construction of circuit itself (cooling technologies), up to electronics control units, control algorithm and finaly IBM/PC based visualization under Control Web enviroment.
|
|
|
Analysis of possibilities for use of III. and IV. generation of nuclear reactors for the Czech Republic
Gajdzica, Lukáš ; Kopřiva, Radek (referee) ; Kopřiva, Radek (referee) ; Matal, Oldřich (advisor)
The thesis deals with the analysis of possibilities for use of III. and IV. generation of nuclear reactors for the Czech Republic. Introduction deals with basic principles of nuclear energetics and fuel cycle which is closely associated with the issue and its development and application in practice will have a significant effect both for choice of future types of nuclear reactors of IV. generation and the matter of settlement with spent nuclear fuel. In other parts the thesis deals with the present state of nuclear energetics in the Czech Republic, compares concrete chosen types of nuclear power plants of III. generation and generally describes nuclear reactors and power plants of IV. generation. Final part of the work is focused on questions concerning the possibility of construction of new blocks of nuclear power plants in the Czech Republic and presents concrete recommendation from author´s point of view.
|
|
| |
|
|
Creative centre - Koprivnice
Křížová, Lucie ; Zdvomka, Ondřej (referee) ; Marek, Jiří (advisor)
Right in the city center, there is a plot with old factory halls. These halls are fascinating and have great potential. But now, they are more of an obstacle. They form a barrier, they are in poor condition, and it robs the city of its values. In my diploma thesis entitled Creative Center in Kopřivnice, in addition to the design of the creative center, I will also deal with how to use the beauty and potential of these old halls, further, how to create beautiful and modernized buildings with a new value. I want to open the whole area, to create a place where people would like to meet and where various functions will be mixed- a place for fun, relaxation, culture, education or even just a shopping or walk. The work is very diverse - from the urban design of the entire plot, through the revitalization of old industrial halls and the layout of a new building, to the interior design of a new gallery.
|
|
|
Design of ISMS in Industrial Environment
Kuchařík, Lukáš ; Rostislav,, Krutiš (referee) ; Sedlák, Petr (advisor)
The master’s thesis is aimed at the proposal of network infrastructure and introduction of the managerial system for the safety of information in the industrial environment. At the beginning the work is focused on theoretical knowledge concerning the safety of information wherein it describes basic concepts and common procedures of the managerial system of the safety of information. Further, the work deals with risk analysis in which the measures for reduction in hazard are suggested. The proposal for a new network infrastructure is finally carried out. The work draws the information from CSN standards ISO/IEC, series 27000.
|
|
|
BUT Technology Transfer Center
Muroň, Jakub ; Štikar, Jaroslav (referee) ; Nový, Alois (advisor) ; Skála, Jiří (advisor)
The Bachelor’s Thesis is based on the architectural study done in the summer semester of the third year of bachelor’s studies of the topic Technology tranfer cetre BUT in Brno. Area of Technology transfer centre of BUT (Brno university of technology) is composed of three separated units - two production complexes and main buidling, which is used for administration in first floor and laboratories in second floor. Design is conditioned by two criteria - an adaptation of objects structure to configuration of terrain and a flexibility of function and logistic. Solution to these issues was to create main communication connected with existing communication. It provides easy and fast logistic service for the production complexes. Shape of the buildings follows contour lines. Due to dynamic shapes I designed simple industrial monochromatic facade, which allows an experimentation with the mass of the building. Line of the flat roof was broken by simple skylights. Strip windows potentiate horizontality in contrast with the main building, which has vertically based character. Industrial character of the complex was accentuated by using metallic facade and prefabricated concrete construction.
|
|
|
Aquaria Production Bukovany
Nováková, Pavla ; Štikar, Jaroslav (referee) ; Nový, Alois (advisor) ; Donaťáková, Dagmar (advisor)
The bachelor’s thesis is based on an architectural study worked up in the fourth semester of the bachelor’s study during the subject Ateliér architektonické tvorby III – AG033. The aim of the subject was the design of an industrial object designed for the production of aquaria on an assigned parcel in the village Bukovany near Kyjov. Not only was there a need for the design of production areas, but it was also necessary to design areas for the production of related furniture, an administrative area and a showroom for the presentation of products. The objective of the thesis was the creation of a construction study, the documentation for the execution of the project and an architectonic detail for the designed building. The assigned parcel is located on the edge of the village of Bukovany, in a relatively calm part of the village surrounded by a football field, cemetery and a former agricultural area. The designed object is formed of 6 separated areas – an administrative area, an exhibition and entry area, a production area, a woodworking area, a storage area and a technical area. The building is formed of a ground floor and one underground floor. Structurally the building is designed on a 6-meter module and the mixed structural system is used. For lighting the areas continuous saddle skylights are used, which switch to vertical elements on the edges of the building. The surroundings of the building are landscaped, including a resting area with a small lake on the southern part of the parcel.
|
|
|
MUSEUM OF TEXTILE INDUSTRY IN BRNO
Střeštíková, Vendula ; Zemánek, Václav (referee) ; Zemánková, Helena (advisor)
The diploma thesis is focused on the revitalization of the dilapidated area of the former textile factory in Brno, Obřany. Areal is located in the city's peripheral parts between Maloměřice and Obřany. The location of the areal creates a strategic potential for creating a closer relationship between the central part of the city and its peripheries which allows urban activities spread to the distant area. The main target of the paper was to promote the relationship between the island and the water element - the river which brings a unique composition for the creation of a new central point of the urban part, which in Obřany currently lacking. The main focus of the project was to support the local potential by expanding the range of urban activities and recreational opportunities with respect for industrial heritage of Brno. It was necessary to made a radical interventions for island revitalization. Cleaning the island from inappropriate, structural, statically or architecturally inadequate buildings and re-opening the space for public was needed. The former spinning factory was therefore a key element of the entire project. It is due to its monumental qualities predestined to place the main and dominant function which after a previous analysis and survey was allocated to the textile museum. As the opposite of this huge structure there were designed a free and grassy area of the park which has been cleaned from the old unsatisfactory objects. The preserved buildings of the former textile factories were individually revitalized and designed with new suitable functions.
|
|
|
The Use of 3D Printers in Medicine
Shchennikov, Vladislav ; Froehling, Kenneth (referee) ; Šedrlová, Magdalena (advisor)
Text se zabývá rychlým rozvojem trojrozměrných tiskáren, popsáním jejich obecných komponentů a využitím 3D tiskáren v medicíně. V našem současném světě se v poslední době objevily 3D tiskárny a byly okamžitě použity v různých oborech a průmyslech. 3D tisk je inovační a perspektivní technologie, která nepředstavitelně mění lidské životy a zkrátí obrovské množství času a zdroje, které se vynakládají na vytváření určitých produktů. V této bakalářské práce uvedené příležitosti využití těchto technologií v různých oblastech především v medicíně, stejně jako rozdíly mezi jednotlivými technologiemi a jejimi výhody a nevýhody.
|
|
|
Pallet conveyor retrofit
Thér, Tomáš ; Jirgl, Miroslav (referee) ; Benešl, Tomáš (advisor)
This bachelor thesis designes new hardware and software designated for retrofit of a pallet conveyor for the purpose of improvement of it's functionability and safety. The work consists of a theoretical describtion of new and already used electrical components, their utilization and creation of the technical documentation. The next part deals with the design of the control software and visualization of the HMI panel. A virtual model of the conveyor was created to test the functionability of the program before it was tested on the real conveyor. The last part consist of funcional safety's theory and its evaluation.
|
guest ::
