|
|
High Frequency Pulsation of Water Turbine in Operation
Kubálek, Jiří ; Kozubková, Milada (referee) ; Hružík, Lumír (referee) ; Haluza, Miloslav (advisor)
This thesis is concentrated on mathematical modeling of high frequency pulsations in pump turbines, which are the source of high-cycle continuous stress of the spiral casing cover, wicket gates and runner. There are proposed the solutions using the transfer matrix for the tube with a constant and conical cross-section. The paper compares variations of cylindrical and conical tubes, changes in boundary conditions. There are the models of PSPP Dlouhé Stráně made only of cylindrical tubes comparing to the model with cylindrical and conical tubes
|
|
|
Cavitation assessment from flow rate drop and high-frequency pressure pulsations.
Šebek, Miloš ; Hudec, Martin (referee) ; Habán, Vladimír (advisor)
Main issue of this master´s thesis deals with high-frequency pulsations caused by cavitating hydraulic components (in this case nozzle and throttle valve). In first measurement on the nozzle was not a high-frequency sensor set in the way, so the evaluation was incorrect. After re-setting of the way was the nozzle measured again and the pulsations were evaluated correct this time. During the last measurement was the sensor located behind the throttle valve, which was with gradual opening and cavitation treatment measured. Resulting dependencies worked out on time dependence. A special mathematical method, Fourier transformation, was used. It transformed pressure amplitudes into frequency dependence. Evaluation of dependecies is the basic step for frequency band assesment, in which the cavitation on particular components happens.
|
|
|
High Frequency Pulsation of Water Turbine in Operation
Kubálek, Jiří ; Kozubková, Milada (referee) ; Hružík, Lumír (referee) ; Haluza, Miloslav (advisor)
This thesis is concentrated on mathematical modeling of high frequency pulsations in pump turbines, which are the source of high-cycle continuous stress of the spiral casing cover, wicket gates and runner. There are proposed the solutions using the transfer matrix for the tube with a constant and conical cross-section. The paper compares variations of cylindrical and conical tubes, changes in boundary conditions. There are the models of PSPP Dlouhé Stráně made only of cylindrical tubes comparing to the model with cylindrical and conical tubes
|
|
|
Cavitation assessment from flow rate drop and high-frequency pressure pulsations.
Šebek, Miloš ; Hudec, Martin (referee) ; Habán, Vladimír (advisor)
Main issue of this master´s thesis deals with high-frequency pulsations caused by cavitating hydraulic components (in this case nozzle and throttle valve). In first measurement on the nozzle was not a high-frequency sensor set in the way, so the evaluation was incorrect. After re-setting of the way was the nozzle measured again and the pulsations were evaluated correct this time. During the last measurement was the sensor located behind the throttle valve, which was with gradual opening and cavitation treatment measured. Resulting dependencies worked out on time dependence. A special mathematical method, Fourier transformation, was used. It transformed pressure amplitudes into frequency dependence. Evaluation of dependecies is the basic step for frequency band assesment, in which the cavitation on particular components happens.
|
guest ::
