|
| |
|
|
Detached house Březolupy
Jurák, Ondřej ; Skřek, Daniel (referee) ; Petříček, Tomáš (advisor)
The aim of the bachelor´s thesis is to develop the design documentation for the construction of the detached house with an establishment which is a rehabilitation surgery in Březolupy. It is a single-family home. The building has a partial basement, the ground floor and the first floor. Functionally it is divided into two parts, which are the detached house for four-member family and the rehabilitation surgery for one doctor, which is single-storey with a trapezoid floor plan. The two parts are not connected. The structure of the building is proposed as a traditional masonry building, walls in the basement are made of concrete blocks of permanent formwork. The ground floor is made of brick blocks. The horizontal load-bearing structures consits of the cast-in-place reinforced concrete floors. The roof structure of the detached house is designed as a flat roof, and there is a green roof designed above the garage and surgery. The facade of the building is designed partly as the ETICS and partly as ventilated facade with timber cladding.
|
|
|
Wooden Based Detached House Vinium
Ždánský, Adam ; Šibal, Jan (referee) ; Králová, Zuzana (advisor)
This bachelor thesis deals with design of timber frame house situated in the cadastre unit Žarošice, region Hodonín. It is a detached house standing in new created resident area. It is designed for a family of four. The houses has two storeys without basement. Next to house is located detached garage and garden house. There is gable roof and flat roof with parapet wall. It is designed as a timber frame construction covered with gypsum fibreboard Fermacell.
|
|
|
The family house
Moudrá, Aneta ; Janíček, Vít (referee) ; Benešová, Romana (advisor)
The subject of presented thesis is preliminary design of a detached house with workshop, as a design documentation for future building construction. The building is located on sloping land in the village Litohrady and consists of a basement and one above ground floor. The workshop is located on the ground floor. Roofing is solved by warm flat roof construction with an inverted roof assembly. Vertical structure and horizontal load-bearing structures are made out of Ytong system, perimeter masonry of the basement floor is made out of concrete blocks of permanent formwork Best. Construction of the house is based on footings. The main entrance to the house is designed to be in the basement, workshop has its own separate entrance on the ground floor. In the basement there is a living area and utility room with double car garage. The ground floor of the house holds a private zone and workshop. Proposal for the house construction emphasizes the layout design, architectural and construction solutions to energy savings and safety in use.
|
|
|
Ecology Wooden Structure House in Krtiny
Židek, Ondřej ; Konečná, Petra (referee) ; Králová, Zuzana (advisor)
The aim of my bachelor's thesis is a project of a new detached house on a sloped site at a level of the documentation for the structure realization. The building is partly basement with two above-ground floor. Individual floors up recede and are roofed with half span roof. The building is divided into four sections.The structure system of the basement part is made up of permanet shuttering and the above-groud part is made up of timber frame. The project of the building is in accordance with the development plan of Křtiny and with the current street built. The work puts great emphasis on layout including security of the construction in terms of statics, architecture, energy savings and safety at utilizing the structure.
|
|
|
High Standard Detached House
Karlík, Štěpán ; Nováková, Tereza (referee) ; Kalousek, Lubor (advisor)
This bachelor’s thesis deals with a new built detached house situated in Přestavlky, Přerov district. The building has two floors with a partial basement, made of sand-lime brick system Sendwix. Ceilings are made of monolithic reinforced concrete and the building is covered with the shed roofs. The object is divided into the social area on the first floor, the sleeping area on the second floor and the technical facilities in the basement. Living rooms are mainly situated in the southern part of the building, in connection with a large terrace.
|
|
|
Energy efficient detached house with fitness centre
Němec, Jaroslav ; Šteffek, Libor (referee) ; Ostrý, Milan (advisor)
It is a detached family house with a smaller fitness establishment. The shape of the building is rectangular with a gabled roof. The building has two above ground and one underground floor. The residential part consists of one apartment for a family with children. Plant fitness center has a capacity of approximately 15 people. The house is built of two structural systems. The perimeter wall in the basement is concrete shuttering with fittings BTB 40/20/24 XPS polystyrene insulation thickness 160 mm and the floors of the calcium silicate system SENDWIX fittings with insulation ROCKWOOL thickness 160 mm. The ceilings are made from POROTHERM system of beams and ceramic inserts MIAKO. The supporting structure of the roof is system of hambalek.
|
|
|
Detached House with Traditional Production of Cheese
Gryčová, Jana ; Hlásková, Michaela (referee) ; Králová, Zuzana (advisor)
The aim of this thesis is to design a detached house with traditional production of cheese. It is a new build two storey family house with a cheese manufacture included, located in Píšť municipality. The building has a partial basement. The house is has a flat roof. KM Beta was used as a construction system. Chosen architectural solution does not affect the sorroundings.
|
|
|
Detached house with workshop
Janda, Lukáš ; Kovářová, Hana (referee) ; Utíkalová, Ivana (advisor)
Abstract Topic of this bachelors work is detached house with workshop in council Lhotky u Malotic. House is designed for 4-6 member family. Structure is without basement with one above ground floor, attic and loft. Workshop and garage are separate connected with main building by fence wall. Desing is based on traditional czech village architecture. Main living rooms are situated to the south part of garden. Land is availiable from distant local road. Vertical load bearing structure is mansory. Horizontal load bearing structures are from traditional timber beam ceiling. Staircase is cast-in-place reinforced concrete. Roof is classical saddle. Project was done in computer program ArchiCAD.
|
|
|
Detached family house, Moravské Budějovice
Kuchařík, David ; Žižková, Lucie (referee) ; Müller, Jan (advisor)
This work deals with the design of a newly-built single-family house, which is located in the cadastral area of the town of Moravske Budejovice. It is a two-floor house without a basement, which is designed for a family of four. The house is detached. The vertical loadbearing structures are lined with ceramic blocks HELUZ, insulated by contact thermal insulation system from polystyrene plates. The building is covered with a shed roof with a slope of 7°. Garage is part of the house and has shed roof with a slope 5°.
|
guest ::
