|
|
Design of a drying device for wood-processing industry
Vach, Tomáš ; Hrázský, Jaroslav (referee) ; Otáhal, Jan (advisor)
The thesis considers a stabilization of temperature of a wood fiber during production of medium close fibre boards MDF in a wood-processing industry. The original purpose to solve energetic optimalization of a kiln dryer has become a serious problem. It turned out that production suffers with a big heat loss which results in big heat loss gained during a kiln drying. Primary aim of this thesis is an examination of a cooling effect of environment on chosen parts of a production line and suggestion of acceptable proceeding to minimize heat loss and to rise temperature of the wood fiber to required temperature. Solution is aimed on the section of a production line between drying equipment and press. First part of the thesis introduces technology of production of fibre boards, introduction to heat transfer problems and also basics of computer modeling of heat flow and transfer using CFD simulation. The next part includes an evaluation of the heat loss of chosen parts of the production line in a current working condition and its comparison with computer simulations. Verification of accuracy of the results while using both approaches to solution is a first step to the improvement of the current situation. It is possible to use the verified calculation model for the following solution of effects on convective and radiation heating of a wood fiber layer. An important factor in the last period of a calculation is a real temperature of the fiber board-mat at the entrance to a press. The higher entering temperature in a set temperature range is reached, the lower time needed for pressing will be and simultaneously the whole industrial process will be cut short. The solution of a problem leads to an achievement of an energy saving and should become a solid basis from which it would be possible to evaluate an improvement of production of MDF boards. The conclusion of the thesis includes an analysis of findings which refers to a heating of wood fiber and it’s effectiveness for a practical use.
|
|
|
Marketing Strategy of the Selected Company
Zapletalová, Lucie ; Vařeka, Jan (referee) ; Chlebovský, Vít (advisor)
Master´s thesis is focused on marketing strategy of a selected company in the woodworking industry. The thesis is divided into three parts. The theoretical part of the thesis is focused on defining the relevant concepts and methods, which are further used in the thesis. The analytical part is focused on the analysis of the current state of marketing strategy in the company. The analytical part includes the marketing research. The practical part of the thesis is based on the findings of the analysis of the current state. This part is focused on proposals leading to improvements in company´s marketing strategy.
|
|
| |
|
|
Možnost financování podniku využitím dotací v rámci programového období 2014 - 2020
Kobalčiková, Eva
This bachelor thesis deals with the issue of drawing subsidies from the European Union. The thesis is divided into three main parts. The first part describes the basic information that is necessary for orientation in the field. Main part of the thesis deals with analysis of support of wood sector. In the second part of my work is proposed the possibility of drawing from the operational program. In this context, there is written up the business plan that is necessary for the application. In conclusion, there are discussed results and recommendations.
|
|
|
Identifikace potenciálních příležitostí v cirkulární ekonomice ve vybraném odvětví národního hospodářství
Jonáš, Ondřej
The aim of this work is to describe the principles of circular economy and bioeconomics and find opportunities for its use in the condition of Czech forestry. To achieve this goal, the method of mapping material flows in forestry in historical, current, and predicting future values was chosen, and key actors in the industry were selected. In-depth interviews were conducted with them and a professional workshop was organized. Based on the discussion, barriers were defined according to the PESTLE method and the list of possible mitigation measures was created, including the selection of the most promising possibilities of using wood biomass locally and with the highest added value.
|
|
|
Wood-processing industry in South Bohemia - variety of health risk assessment
SEDLÁČKOVÁ, Lucie
In my diploma thesis I deal with the issue of the working environment in the woodworking industry and the diversity of the associated risks, such as noise, dust, vibrations, chemicals, physical load and working position. This issue is current due to the rise of custom joinery. Demand also rises for the quality hard wood and its products, so part of my work deals with this issue as well. I find problematic the variability of the work environment related to measurable environmental parameters. The theoretical part will be based on literature and legislation related to this issue. The areas related to wood-processing operations will be detailed. This issue is handled mainly in relation to the hygiene of work and occupational medicine. Therefore the legislation and terminology, on which the practical part is based, devote a considerable part of the theoretical part. Three companies operating in Southern Bohemia were deliberately selected for research. The practical part is based on the measurement protocols of the individual working environment factors. I obtained the results using secondary analysis of data from measurement protocols of individual factors, professional literature, decrees, government regulations and laws. Two objectives and three research questions have been set for research. Objective 1: The work will identify risk factors for the work of woodworkers. Objective 2: The work will evaluate proposals for employers' precautions to protect the health of workers in individual woodworking plants. V1: Are there significant differences in the occurrence of risk factors in woodworking with regard to the way wood and its products are processed? V2: Are there significant differences in the precautions for the health protection in wood production according to the way of processing of wood and its products? V3: How does hardwood dust affect woodworking technology and health protection precautions? The first objective was chosen for the factual description of the working environment of individual companies, as the individual operations differ significantly from the occurring risk factors and their risk. The second objective was chosen with regard to the importance of properly chosen health protection precautions. Failure to comply with the employer's obligations linked to the protection of workers' health may result in serious and permanent damage to health. The importance of appropriately chosen precautions results from the final part of my work.
|
|
|
International Trade with Wood
DVOŘÁČKOVÁ, Tereza
This thesis is focused on forestry economics and timber industry and present state of the Czech foreign commerce with raw food. Finally, there are determined critical factors, proposals and recommendations.
|
|
|
Comparison of EMPO HOLZ, Ltd with selected Competitors
Zdarsová, Petra ; Pevná, Jana (advisor) ; Kozáková, Petra (referee)
The aim of this graduation thesis is to perform comparison of EMPO HOLZ, s. r. o. with selected competitors and industry averages values for the years 2012, 2013 and 2014. Further, this paper aims is to evaluate the financial situation of these compared establishments. Financial health is assessed by the application of financial ratios and the subsequent interpretation of the results. The comparison has been conducted by using unidimensional and multidimensional methods of the intercompany comparison. Spider analysis demonstrates the comparison with average values of industry. Output of this graduation thesis is the position of EMPO HOLZ, s. r. o. in the analysed group. Position in the group is based on the results of the particular methods of intercompany comparison.
|
|
|
Business model canvas and its application in wood processing industry
Borovičková, Nina ; Riedl, Marcel (advisor) ; Jarský, Vilém (referee)
This thesis deals with the creation of a canvas business model which is understood as a company strategy plan. Its structure consists of nine basic elements (customer segments, value preposition, chanels, customer relationship, revenue streams, key resources, key activities, key partners and cost structure), which must be interconnected in the way that they could bring significant values to the company and its strategy.
The aim of this thesis is to apply this method canvas business model to a business subject operating in the wood processing industry and to suggest possibilities of innovation in the same company using the canvas model. The innovation should have the significant positive influence on the future development of the explored subject.
|
|
|
Business Plan
Křemen, Josef ; Pilař, Ladislav (advisor) ; Jakub, Jakub (referee)
This thesis evaluates investments based on a business plan. The business plan is developed for the company Agrospol, spol. s r. o. Vračkovice, which intends to expand its product portfolio through the saw-mill site. The company is engaged in agricultural production and operation of the saw would be for her only an ancillary activity to streamline especially human and material resources of the company.
Specific business plan is compiled based on the structure defined in the theoretical part. It contains basic information about the company, organizational structure, product performance, analysis of internal analysis and macro micro surrounding, based on which the SWOT matrix and determined strategy. Thereinafter it describes the marketing activities. Another part of the business plan is focused on information about technology, implementation and risks. The intended investment costs, variable and fixed costs and estimated projected cash flows from the investment are known. In conclusion, the investment is evaluated by selected static and dynamic indicators for evaluating investments.
|
guest ::
