|
|
New Areas of the Ultrasonic Application in Microelectronics Technology
Buršík, Martin ; Pietriková, Alena (referee) ; Králová,, Iva (referee) ; Szendiuch, Ivan (advisor)
Doctoral thesis deals with the deposition of special thixotropic materials for microelectronic technology. The aim of the work is the development of the new method optimizing the dosing process in order to achieve a print resolution of better than 100 microns. The work includes the development of a special dispensing head (UZD) using the influence of ultrasonic energy. These results demonstrate the possibility of a newly developed method that is able to print thixotropic materials with a resolution of 65 microns. Compared to other methods achieves these results with the commonly used materials for thick film technology with particle size up to 5 microns.
|
|
|
Measurement and evaluation of flows in sewer networks
Haška, Aleš ; Prax,, Petr (referee) ; Raclavský, Jaroslav (advisor)
Measuring flow rate, water surface and rainfall are the crucial inputs for the calibration of the hydraulic model. This bachelor’s thesis presents mathematical models and measuring devices for the sewer networks. This thesis summarises the measuring devices that are currently available and used on the sewer network. Furthermore, theory of random and systematic errors is discussed. In the second section, this theory is implemented in the chosen area for the sewer network in Znojmo. On the 9. 9. 2020, three ultrasonic measuring devices (type ISCO 2150 with AV sensor) and one device for measuring water surface (type IJINUS) were installed in this area. This thesis provides continuous measurements which are then applied for the calibration of the hydraulic model. On completion of this thesis it is necessary to continue to calibrate and verify the model in order to increase accuracy and be more precise.
|
|
|
Experimental ultrasonic measurement using LabView
Baše, Michal ; Jiřík, Radovan (referee) ; Kolář, Radim (advisor)
This bachelor´s thesis deals with ultrasonic field, measurement of its attenuation and measurement using LabVIEW. There are explained basic parameters of ultrasonic transducers and the ultrasonic field. Two methods for measuring ultrasonic attenuation and modification of the second one were proposed. There are introduced two programs in the LabVIEW for attenuation measurement, first one generates continual signal, which is brought to transducer and second one generates pulse of a few periods of sine. At the end there are showed produce of measurement using these programs.
|
|
|
Acceleration of Ultrasound Simulations on Multi-GPU Systems
Stodůlka, Martin ; Vaverka, Filip (referee) ; Jaroš, Jiří (advisor)
The main focus of this project is usage of multi - GPU systems and usage of CUDA unified memory . Its goal is to accelerate computation of 2D and 3D FFT, which is the main part of simulations in k- Wave library .K- Wave is a C++/ Matlab library used for simulations of propagation of ultrasonic waves in 1D , 2D or 3D space . Acceleration of these functions is necessary , because the simulations are computationally intensive .
|
|
|
Fast Reconstruction of Photoacoustic Images
Kukliš, Filip ; Dvořák, Václav (referee) ; Jaroš, Jiří (advisor)
The ability of reconstruction of photoacoustic images is important requirement to study soft tissues or vascular and lymphatic systems in high resulution but in small space. Today solution needs extensive computing power and it is noticeably time-consuming. In this study we would like to introduce a new solution which would be a way much faster and easy to use. My solution is up to 20x faster and needs forty percent less memory. This solution may be a better alternative for scietnist who study soft tissues by photoacoustic imaging.
|
|
|
Unconventional machining processes
Exnerová, Jitka ; Mouralová, Kateřina (referee) ; Kalivoda, Milan (advisor)
This thesis deals with the methods of the unconventional machining. The first part outlines the history of the machining methods, their characteristic and use follows. The second part aims at the method of the water jet, its technology, safety use, its advantages and disadvantages. Subsequently the thesis presents selected companies dealing with water jet cutting technology. At the end the thesis presents the environmental impact of the water jet cutting.
|
|
|
Autonomous Landing System for Quadrocopter
Vomočil, Jan ; Kopečný, Lukáš (referee) ; Žalud, Luděk (advisor)
This thesis describes the design and implementation of systems for automatic landing and stabilization of air vehicle known as Quadrocopter. It focuses on image processing from a camera placed on board of the robot. The aim of image processing is detect landing target and calculate the distance from the desired position. Further is solved vertical stabilization for higher altitudes. For this function is measured atmospheric pressure. Conversely, for low altitude flight is used a ultrasonic range finder. In the conclusion is solved the implementation of the system.
|
|
| |
|
|
Distance meter with ESP32
Havelka, Jan ; Hanák, Pavel (referee) ; Lattenberg, Ivo (advisor)
The aim of this thesis was to implement a distance meter with two sensors (ultrasonic and laser) with an ESP32 microcontroller. Then the ability to display measured values on the display and via the web interface. The first part deals with the theory of ultrasound and laser, their use as distance meters and a summary of advantages and disadvantages. The following chapter describes the design of the distance meter with all the components that will be used. The third chapter focuses on the implementation of the distance meter. It was created wiring diagram and designed printed circuit board that handled all mutual communication between the ESP32 and other peripherals. The whole device is placed in a box in the shape of a pistol printed on a 3D printer. The next part of the work briefly describes the software of the distance meter written in the C programming language in the development environment Arduino IDE. Finally, images of the final product were inserted into the work and test measurements were performed, the result of them is written into tables, graphs and subsequently evaluated.
|
|
|
Design of Humidifier
Piskačová, Anna ; Sládek, Josef (referee) ; Rubínová, Dana (advisor)
This bachelor’s thesis focuses on creation of a design for an ultrasonic air humidifier with an optional aromatherapy mode with an automatic power off option. This product is designed for both home and office. The most stressed aspects of the air humidifier are an easy manipulation and cleaning of the water reservoir and simple, yet attractive visual. The design is based on the knowledge gained from the analysis of existing air humidifiers.
|
guest ::
