|
|
Design and assessment of the load-bearing part of the reinforced concrete structure
Tihelka, Marek ; Lagiň, Juraj (referee) ; Kostiha, Vojtěch (advisor)
The aim of the bachelor thesis is the design and assessment of a reinforced concrete foundation structure of a sports hall. The proposed solution is a monolithic foundation slab. The design software SCIA Engineer 22.0 was used to determine the reactions acting on the slab and slab internal forces. The reactions were also verified by manual calculations. The slab was assessed for ultimate and serviceability limit state and designed by hand. This work also includes design of reinforced concrete monolithic column. A drawing documentation was also prepared for both reinforced concrete slab and column.
|
|
|
Reinforced concrete structure of the cooling tower
Vostal, Lukáš ; Švaříčková, Ivana (referee) ; Šulák, Pavel (advisor)
The content of the bachelor thesis is structural analysis of cooling tower fundamental construction. Modeling of the computational model and the calculation of internal forces of cooling tower fundamental construction in Scia Engineer. The reinforced concrete parts of the structure are assessed at the ultimate limit state and the subsoil is assessed at serviceability limit state. Part of the thesis is also the desing of the reinforcement of the foundation structure and processing of the drawings.
|
|
|
Design of Load Bearing Concrete Structure
Klodner, Jan ; Vácha, Jaroslav (referee) ; Štěpánek, Petr (advisor)
This thesis is focusing on general issues of floor concrete slabs, technology, implementation, subsoil models, calculation of internal forces and design approaches. Based on these data the thesis monitors the behaviour of floor slabs according to the various parameters. It also includes three versions of design of the real floor slab, made of steel fibre reinforced concrete, reinforced concrete and prestressed concrete. Economic comparison is also included. In addition it developes a design of the chalice base and reinforced concrete column of the supporting hall system, instead of the original usual base with steel column.
|
|
|
REINFORCED CONCRETE TANK
Beran, Jakub ; Jeneš, Rostislav (referee) ; Šulák, Pavel (advisor)
The aim of the bachelor thesis is a static design of an reinforcement tank. The internal forces are calculated by FEM programme Scia Engineer 16.1 with a SOILIN modul interacting with a subsoil model. The internal forces are verified by a manual calculation. The load-bearing elements are designed with these forces. The structural assessment report is designed to ultimate limit state and service limite state – service limit state of crack. Another report considers ground water occurring. The static report deals with different time of concreting foundation slab and walls. This is the reason why shrinkage is very important for internal forces and their values. The objective of the project is to design the tank without cracks in concrete. The limit width of cracks is wk= 0,3 mm by EC 1992-1-1.
|
|
|
Design of selected elements of reinforced concrete structure
Klust, Vojtěch ; Čairović, Dorde (referee) ; Kostiha, Vojtěch (advisor)
Diploma thesis deals with the desing of reinforced two way concrete foundation slab in three variants. In the first variant is slab of constant thickness. In the second variant is haunched slab. In the third variant is slab with piles. The thesis includes a structural design as well as drawings. All calculations were performed in accordance with applicable standards. For the design was used program SCIA Engineer 19.1.
|
|
|
Reinforced concrete structure for grain hopper
Jakubcová, Hana ; Šulák, Pavel (referee) ; Strnad, Jiří (advisor)
The subject of this bachaleor‘s thesis is a design and structural assessment of reinforced concrete structure for grain hopper. The structure is located for most part in the ground and is supported by one wall against the underground wall of the mill. Walls are connected by a hole for the pipe, which is using for transport grain to the mill. Designing are walls and bottom of the structure. Calculation of load effect was made in SCIA Engineer 18.1, where is made a subsoil using module Soilin. For check the calculation is make by hand calculation on calculation model of one wall.
|
|
|
Load bearing RC structure of office building
Ferencz, Balázs ; Zlámal, Martin (referee) ; Šimůnek, Petr (advisor)
The Master’s thesis is focused on the analysis and design of selected members of load-bearing structure of an administration building according to the ultimate limit states (ULS) and seviceability limit states (SLS). The calculation and the analysis was supported by design software SCIA ENGINEER 2012. Structural analysis deals with the design of the reinforced concrete (RC) flat slab above the 4rd strorey which is particularly supported by RC columns and particularly lies on RC walls. Furthermore, the Master’s thesis contains analysis of some selected columns of last three storeys, column of lowest storey, construction of stairway between 4rd and 5th storeys. The work beside this deals with the calculation and design of foundation of the object. The rest parts of the load-bearing structure are not solved in the Master’s thesis.
|
|
|
Reinforced concrete aeration tank
Vlach, Jakub ; Strnad, Jiří (referee) ; Šulák, Pavel (advisor)
The aim of this work is to design and static analysis features open embedded aeration tank wastewater treatment plants, in particular the assessment base plate and exterior walls. On the basis of reports is prepared drawings consisting of reinforcement drawings and drawing shapes. The proposal was made on the values of the internal forces of the outputs of computer program SCIA Engineer 2012-Student Edition.
|
|
|
Design and assessment of the load-bearing part of the reinforced concrete structure
Tihelka, Marek ; Lagiň, Juraj (referee) ; Kostiha, Vojtěch (advisor)
The aim of the bachelor thesis is the design and assessment of a reinforced concrete foundation structure of a sports hall. The proposed solution is a monolithic foundation slab. The design software SCIA Engineer 22.0 was used to determine the reactions acting on the slab and slab internal forces. The reactions were also verified by manual calculations. The slab was assessed for ultimate and serviceability limit state and designed by hand. This work also includes design of reinforced concrete monolithic column. A drawing documentation was also prepared for both reinforced concrete slab and column.
|
|
|
Design of selected elements of reinforced concrete structure
Klust, Vojtěch ; Čairović, Dorde (referee) ; Kostiha, Vojtěch (advisor)
Diploma thesis deals with the desing of reinforced two way concrete foundation slab in three variants. In the first variant is slab of constant thickness. In the second variant is haunched slab. In the third variant is slab with piles. The thesis includes a structural design as well as drawings. All calculations were performed in accordance with applicable standards. For the design was used program SCIA Engineer 19.1.
|
guest ::
