|
|
Modern CAD Systems in Power Engineering
Strnad, Karel ; Vorel, Pavel (referee) ; Kuchyňková, Hana (advisor)
This work is focused on the short summary of history CAD systems and there are described the news, which brings the new version of programme Autodesk Inventor compared to the previous one. Then, in five steps there is described the procedure of parametric modelling in the programme Autodesk Inventor, from the sketch to final 3D model, including the drawing documentation. The work put particular emphasis on the explanation the basic modelling functions and environment in the same programme. An important part of this work is also the short explanation of some concepts relating to parametric modelling and animation of the model created in programme Autodesk Inventor.
|
|
|
Fast-charger for lead-acid batteries 12 V
Kopuletý, Ondřej ; Pazdera, Ivo (referee) ; Vorel, Pavel (advisor)
This Master thesis deals with modification of lead battery charger connection. In particular, changes are made to the control board. The theoretical part describes the principle of charging lead batteries and the description of the basic types of switching power supplies. Furthermore, the dimensioning of important components in the circuit together with the optimization of the switching frequency and the parameters of the high-frequency transformer are also presented. At the end of the thesis is the procedure of assembling the whole charger.
|
|
|
Off-line supply source 15 V / 1.5 A with a galvanic separation for a laboratory equipment
Pokorný, Vladimír ; Tománek, Radek (referee) ; Vorel, Pavel (advisor)
This bachelor's thesis deals with the design of a single-acting switching power supply for a laboratory equipment. The required parameters of the source are input voltage 230 V and frequency 50 Hz, output DC voltage 15 V, and output current at least 1.5 A. The introduction of this thesis briefly describes the operation of flyback converters. The next part is focused on the design of the high-frequency transformer and the main power part. The work continues with the designing of power components and heatsinks. The following part is the design of the control part, which will use an integrated circuit from the UC384x family, and the construction of the power supply. The conclusion of the thesis focuses on the source debugging and verification measurements.
|
|
|
Inductive position sensor
Volf, Lukáš ; Vorel, Pavel (referee) ; Huták, Petr (advisor)
In the beginning is given an overview of sensors and their separation and properties. This work also deals deeper with inductive sensors. The work is designed for evaluation of the oscillator circuit (binary inductive sensor), its practical implementation, measuring the sensing range of different metals and measurement evaluation. For those interested, here is a list of literature.
|
|
|
Brightness control of light sources
Dostál, Lukáš ; Vorel, Pavel (referee) ; Huták, Petr (advisor)
Thesis is focus on brightness control of lighting sources. The first objective of the thesis is to determine basic concepts and explain interrealationships among particular magnitudes of lifting technology. Further is necessary describe functionality, particular light sources and thein possibility of use in practise. There is also outline issue of darkfall of particular types of sources and their evolution. The other part of thesis compare energy output of lighting sources and describe their possible future development. Further this thesis deals with options of regulating of brightness for LED moduls. There is also proposal of acceptable amperage regulator LED moduls including its software - microcontrol ATMEL AVG. Microcontrol ATMEL AVG Tiny 13 is programme in C language within computer environment AVR Studio 4 and will be record through the use of AVR Dragon.
|
|
|
Two-stroke Engine Pre-ignition Controller with Microcontroller
Veselý, Tomáš ; Vorel, Pavel (referee) ; Šebesta, Jiří (advisor)
This paper deals with the problem of two-stroke engine pre-ignition controller with the use of microcontroller for single-cylinder engine and double-cylinder engine. The mechanical design is drawn for motorcycles JAWA and ČZ and for engines of the same mechanical type. The establishment uses non-contact status analysis of engine with non-electric sensor. The very important thing for the design is the simplicity of the establishment. The other important thing is the minimisation of mechanical arrangement of engine and the vehicle as a whole. The importance of this establishment is non-contact switching and the possibility of changing pre-ignition maps depending on the number of rotations per minute, the temperature and the load of the engine.
|
|
|
Inverter for arc welding
Matiaško, Maroš ; Huták, Petr (referee) ; Vorel, Pavel (advisor)
This bachelor’s thesis describes designing, paremeter rating and construction of welding source on the principle of high-frequency inverter. The main scope of work is to design a switching inverter for arc welding on the principle of the forward converter. Welding source is regulated for demand of constant current.
|
|
|
DC/DC converter 24 V / 320 V / 60 W for a back-up supply source with a galvanic separation
Dvořák, Petr ; Martiš, Jan (referee) ; Vorel, Pavel (advisor)
This bachelor‘s thesis deals with the design, dimensioning and realization of a DC/DC 24 V / 320 V converter with a output power of 60 W. In the first part there is a short description of the linear stabilizer and then the switching sources with their dismemberment. Based on that chapter, was selected the flyback converter. The second part deals with components design and description of the control circuit. At the end, the construction of the converter with the verification measurement records is shown.
|
|
|
Charger for lead-acid accumulators 12V with the aditional fuction "start-car"
Benada, Tomáš ; Červinka, Dalibor (referee) ; Vorel, Pavel (advisor)
This thesis is engineering design of the intelligent CHARGER FOR LEAD-ACID ACCUMULATORS 12V WITH THE ADDITIONAL FUNCTION "START-CAR". It contains calculations of each component. The switching power supply is the mainstay of the charger that makes the charger small, lightweight and portable. The Intelligent CHARGER FOR LEAD-ACID ACCUMULATORS 12V WITH THE ADDITIONAL FUNCTION "START-CAR“ charges the accumulator by method of constant voltage with current limitation of 0,5A, 5A, 20A, 50A. 50A current is used in winter during starting of a car, when the battery can´t provide sufficient current. The device comprises safety protection for the charger, supply network and battery. There are three LEDs placed on the front side of the charger reflecting status of the device.
|
|
|
Drivers for power SiC MOSFET transistors
Vitek, Vojtech ; Vorel, Pavel (referee) ; Procházka, Petr (advisor)
The bachelor thesis describes gate driving principles of power MOSFET transistors made of silicon carbide material. The autor's aim is describing a different types of gate drivers and basic rules during process of designing gate drivers. In the theoretical part, the author will mount printed circuit board of gate driver designed on UVEE FEKT VUT Brno and verify functionality.
|
guest ::
