|
|
Proposal of measures in the low voltage network for the implementation of renewable sources and electromobility according to scenarios NAP SG
Vojtěch, Jan ; Kučera, Michal (referee) ; Ptáček, Michal (advisor)
The thesis analyzes legislative and strategic documents of the European Union and the Czech Republic which set targets in environment and energy area in 2030, alternatively in 2040. The individual chapter is dedicated to national action plans, where the most important is National Action Plan for Smart Grids setting specific requirements for future development of smart grids. The thesis contains analysis of distribution network in the municipality of Následovice and simplifying assumptions for the implementation of calculation. There are also introduced scenarios which have been used for the calculation of the distribution network with its results. Potential defects of the distribution network are commented with suggested solutions. The calculations were repeated to verify the solutions. Results are recapitulated in an individual chapter. Graphical outputs of the calculations can be found in the attachement.
|
|
|
Seismic activity measurement using fiber optic sensors
Vaněk, Stanislav ; Horváth, Tomáš (referee) ; Vojtěch, Josef (advisor)
The aim of master's thesis is to get familiarized with the problems of measurement and analysis of seismic waves. Theoretical part deals with the description of seismic waves, especially their types, sources and properties. Attention was afterwards focused on the measurement systems of these waves, emphasis was placed on their principles and advantages. The practical part discusses methods of noise reduction and highlighting of significant events in measured data. At the end, individual methods are implemented into user-friendly graphical interface.
|
|
| |
|
|
Transmission of accurate time and stable frequency through the optical network
Girt, Lukáš ; Horváth, Tomáš (referee) ; Vojtěch, Josef (advisor)
Diploma thesis focuses on the theoretical analysis of precise time and stable frequency transfer. It describes what time and frequency is, their properites and options of their generation. Next part deals with different possibilities of time and frequency transfer especially using fiber optics. In the practical part equipment for analysing effects of temperature changes on precise time transfer is puted into operation. Arduino platform is used for monitoring temperature changes on fiber. For testing of frequency stability in variable temperature conditions of environmental chamber device is created using highly coherent laser.
|
|
|
Verification of parameters of passive optical components on short wavelengths
Látal, Michal ; Filka, Miloslav (referee) ; Vojtěch, Josef (advisor)
Semestral thesis deals with the basic theoretical knowledge in the field of optics, light propagation and optical fibers. It describes in detail the optical transmission system and its associated issues, such as the attenuation of optical fibers or differently caused dispersion. The main part of this work is a description of each passive optical elements, their production technologies and applications in optical communications. Within the optical connection its radiation sources and detectors of optical radiation are explained. The last practical part is focused on the measurement of insertion loss provided by passive optical components.
|
|
|
Graphical user interface for sensing systems
Dejdar, Petr ; Vojtěch, Josef (referee) ; Münster, Petr (advisor)
Master thesis is focused on creating graphical user interface for the sensorical system based on Phase-OTDR. Theoretical part describes optical fibers, explains the principle of Bragg gratings, their production and their use in sensors. Methods of optical fiber attenuation and phase OTDR measurement are also described. Other part is focused on LabVIEW programming software and utilization of sensorical system and its components. Practical part deals with the user interface itself, which consists of two tabs. The first tab is designed for evaluation and display of measured data. The second tab is used to control and set up system components. Both of these tabs are further subdivided into other subtabs. Regarding the conclusion, further development of the program and options of hardware replacement for improving this sensorical system in the future will be discussed.
|
|
|
Measurement and evaluation of dispersions in optical fibre
Očenášek, Jan ; Čučka, Milan (referee) ; Vojtěch, Josef (advisor)
This semestral project deals with measurement and evaluation of the dispersion in the optical fiber. Introduction of the work is focused on the description of the principle of optical fiber and optical environment. Another part is devoted to a detailed description of polarization mode dispersion - PMD, including the causes of which are divided into internal and external. Because of these impacts of the differential group delay DGD, which results in time delay of each polarization modes to each other and hence to reduce the transmission speed. Polarization mode dispersion is one of the most limiting factors for the realization of high-speed optical transmission, so in the next section describes the measurement and compensation of PMD effect.
|
|
|
Optical software defined networks
Janoušek, Adam ; Horváth, Tomáš (referee) ; Vojtěch, Josef (advisor)
The bacherol thesis „Optical SDN“ deals with the analysis of software-defined technology networks on the optical switch. Specifically, it focuses on remote manual switching and automatic switching based on surroundings. The aim of the thesis is description of technology, understanding the principle of software-defined networks, including the implementation of demostrative manual remote switching and automatic switching.
|
|
|
Transmitting television signal via fiber optics
Abbasi, Farhad ; Vojtěch, Josef (referee) ; Münster, Petr (advisor)
Hlavním cílem této práce je teoretická analýza přenosového DVB TV signálu prostřednictvím optických vláken, analýza sítě CATV a modulační techniky pro její přenos. První částí této práce je zavedení šíření signálů v optických vláknech a pasivních součástech optických sítí, následované obecnými informacemi o digitálním rozhlasovém vysílání, sítí CATV a modulačním formátu pro jejich přenos. V druhé části, která se nazývá praktická část, vysvětluje výsledek měření, který se skládá ze srovnání různých měřicích parametrů, jako jsou "Power SIGNAL", "C / N", "Kanálový výkon" pro rozdílné délky optických vláken.
|
|
|
Design, implementation and measurement of passive optical network
Kužela, Jan ; Horváth, Tomáš (referee) ; Vojtěch, Josef (advisor)
The aim of this thesis is to formulate the design of optical access network in designated area. The design is focused on the physical network layer and it covers optical fibers, cable protectors and links, optical hubs, racks and active components. The thesis also docu- ments network architecture, the configuration of active components and provides results from monitoring of selected network segments. The thesis consists of the theoretical part and practical part. In the theoretical part, there is an introduction to optical networks, their configurations (FTTH, FTTB, FTTC, FTTN), relevant networking standards and technologies. The practical part of the thesis covers design proposal of a network located in Slavičín. The design reuses infrastructure and technologies of existing network. The proposed design follows FTTH architecture which has benefits of low maintenance cost and it also fulfills GPON standard.
|
guest ::
RSS feed.