National Repository of Grey Literature 25 records found  1 - 10nextend  jump to record: Search took 0.00 seconds. 
High-bay warehouse for lacquered bodywork
Bachorík, Patrik ; Vaverka, Michal (referee) ; Vašek, Lubomír (advisor)
The aim of this diploma work was a design of a high-bay warehouse for lacquered car bodywork with focus on the issue of a conveyer line and its incorporation into the existing material flow in company Skoda Auto a.s.. Three variants of the warehouse for the lacquered car bodywork were proposed and described. For each one of them, a time analysis of car bodywork removal from the storage was carried out. The thesis was ended with a complex evaluation of the three variants according to chosen criteria, based on which the best variant was selected. That one was further depicted in layout documentation.
The propulsion and braking system of a motor vehicle for a railroad museum of industrial railways
Gerec, Matúš ; Vaverka, Michal (referee) ; Škopán, Miroslav (advisor)
This thesis deals with the design of the propulsion and braking system for narrow gauge railcar. It contains the design of hydrostatic drive system with closed-loop hydraulic circuit. Then thesis describes the concept of propulsion system placement in the frame of the railcar and design of the braking system.
Intelligent Control Methods in Automation of Process of Construction Machines Control
Vaverka, Michal ; Škopán, Miroslav (advisor)
This work deals with the possibility of use of intelligent methods in construction machines control. These methods are based on GPS in combination with using laser and ultrasonic technology. There is in detail described especially control by robotic total station and 3D control, which includes digital model of construction site. The new trends of control are especially applied on the vibratory rollers. There are taken into consideration: achievement of sufficient degree of compaction on the basis of on-line information about conditions of subsoil.
Intelligent Control Methods in Automation of Process of Construction Machines Control
Vaverka, Michal ; Kopecký, Zdeněk (referee) ; Voštová, Věra (referee) ; Škopán, Miroslav (advisor)
This work deals with the possibility of use of intelligent methods in construction machines control. These methods are based on GPS in combination with using laser and ultrasonic technology. There is in detail described especially control by robotic total station and 3D control, which includes digital model of construction site. The new trends of control are especially applied on the vibratory rollers. There are taken into consideration: achievement of sufficient degree of compaction on the basis of on-line information about conditions of subsoil.
Skid conveyor technology
Fajkus, Pavel ; Vaverka, Michal (referee) ; Škopán, Miroslav (advisor)
This diploma thesis deals with planning conveyor technology in welding factory in Kvasiny and concept proposal of stacking equipment for skids. The report contains summary of conveyor technology in Škoda Auto a.s., description of the planning process about connection line from new hall to the existing hall, proposal of stacking equipment constructional variants, mechanism load stress analysis, inner effects results and verification by final elements method (MKP) components of the choice.
Anylytical solver for strength calculation of railway axles
Fišer, Petr ; Náhlík, Luboš (referee) ; Vaverka, Michal (advisor)
This master thesis deals with wheel set axles of rail vehicles, their design and methods of implementation stress analysis. In this work, I created a powered locomotive wheel set: axle and wheel. For the purpose of the design department of the Bonatrans Group a.s. company I developed an analytical solver, which allows creating stress analysis, which will be used for verifying finished design and in addition it allows printing of stress analysis as report for the railway´s offices. Next step was a stress analysis of this design of axle in this analytical solver.
Realization of educational problem based on torsional vibration apparatus
Bartošek, Daniel ; Hartl, Martin (referee) ; Vaverka, Michal (advisor)
The presented master´s thesis deals with realization educational tasks on torsional vibration apparatus. It was designed and tested six educational experiments, to extend student´s knowledge of the static and dynamic properties of rotary systems. On the experimental apparatus it is possible to use inertial discs, adjustable semi-rotary damper with forced vibration crank drive unit. New set of shafts extends the variability of experimental apparatus. Students can realize the measurement of dynamic characteristics and torsional vibration using oscilloscope. New frame for the apparatus which meet all operation requirements was also designed. The solved problematics and all educational tasks are described in new prepared materials for teaching.
Realization of educational problem based on preloaded bolted joint apparatus
Žaba, Tomáš ; Náhlík, Luboš (referee) ; Vaverka, Michal (advisor)
In the master’s thesis an educational task concerning an experimental apparatus for quantity measurement in preloaded bolted joint is realised. In terms of its preparation an innovation of the apparatus leading to an easier and faster pretension realisation was implemented. The educational task for students and also teaching material were produced. The educational task itself consists in experimental confirmation of the relation between the tightening torque and the caused pretension. An FEM model simulating an apparatus flange deformation by given pretension was designed to verify the experiment. The thesis also contains information about the preloaded bolts, pretension elicitation methods and pretension control methods.
Realization of educational problems based on experimental apparatuses with oil and air lubricated bearings
Kučera, Ondřej ; Veselý, Oldřich (referee) ; Vaverka, Michal (advisor)
This master thesis is focused to make education exercise on simulation equipment, tilting pad apparatus and air bearing apparatus. Exercise are, for better understanding problems, completed about exercise measurement viscosity. Were to be proposed three separate exercise for exercising, which were to be well – tried. Measured data from stations for sliding bearing will students confront with computed data. To every exercise are created instructions for exercising, educational presentation and poster to arrangement.
Study of behaviour of EHD lubricated contact of machine parts within non-smooth surfaces
Zapletal, Lukáš ; Maňas, Pavel (referee) ; Vaverka, Michal (advisor)
Master’s thesis deals with development of software application to calculate contact pressure in eleastohydrodynamic lubricated contact in order to use previously obtained data of the lubricating film thickness. The introduction contains a short overview of methods used for the study of film thickness and contact pressure. Custom work includes a contact pressure solution derived from a film thickness, a description of the developed software and analysis of algorithms used for its compilation. The last part deals with the verification of algorithm, application of software for calculating the contact pressure on the rough surface and analysis of the results. The conclusion includes a summary and possible application of software in practice.

National Repository of Grey Literature : 25 records found   1 - 10nextend  jump to record:
See also: similar author names
3 Vaverka, Martin
2 Vaverka, Miroslav
Interested in being notified about new results for this query?
Subscribe to the RSS feed.